Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Recherche par propriété

Une liste de toutes les pages qui ont la propriété « Material » avec la valeur « * 2 x 60L containers, e.g. plastic rubbish bins (preferably made of solid, durable inert plastic) * 1 x lid * 1 x 15L (approx.) bowl of an equal diameter to the container (preferably made of solid durable inert plastic) * Water pump/airlift pump for pond or aquarium min. 300 L/hour to a height of 1m * 50cm hose pipe (with a diameter which will fit the pump output) * Expanded clay ball or porous volcanic rock (microporous materials are good for making a solid habitat for mirco-organisms): approximately 5L for the biofilter and 5L for the worm composter (bedding material for drainage) * Straw/dried vegetation (habitat made of materials high in cellulose for micro-organisms), approximately 5L for the biofilter and 5 L for the worm composter * Water: approximately 40L * Fungi (Trichoderma or Strepomyces) (GHE - BM or Subculture) or rotting organic matter, * A good selection of earthworms (min. 50) ». Puisqu’il n’y a que quelques résultats, les valeurs proches sont également affichées.

Affichage de 101 résultats à partir du n°1.

Voir (200 précédentes | 200 suivantes) (20 | 50 | 100 | 250 | 500).


    

Liste de résultats

  • Marmite Norvégienne Tissu Super Efficace  + (- '''Laine de mouton''' lavée et floconnée- '''Laine de mouton''' lavée et floconnée (quantité selon taille choisie- étape 1)
    Tous les types de laine peuvent convenir. S'assurer que la laine est convenablement lavée . Floconner la laine signifie l'aérer au maximum avec les mains ou un système de cardage pour permettre à l'air de s'implanter dans la fibre. Il n'est pas nécessaire d'obtenir une natte de laine bien cardée & peignée, bien au contraire.
    - '''tissu naturel''' 2 fois 1m50 x 1m20
    Privilégier un tissus épais pour la face intérieur (à minima) et un tissu tissé serré pour garder la brins de laine à l'intérieur. En cas de laine très jarreuse n'hésitez pas à doubler votre tissu.
    - Anses de 50cm 5 ( en option ) - Fils - Cordon 3m - Bouton
    reuse n'hésitez pas à doubler votre tissu.</div> </div> - Anses de 50cm 5 ( en option ) - Fils - Cordon 3m - Bouton <br/>)
  • Poste à souder de récup  + (- 3 transformateurs de micro-onde à récupé- 3 transformateurs de micro-onde à récupérer - 2 ventilateurs de micro-onde à récupérer - Câble d’alimentation de micro-onde - 17m de câbles gaînés de 4mm² à récupérer - 2m de câbles gaînés de 2,5mm² à récupérer - Dominos 4mm² et 2,5mm² - Disjoncteur 16A [https://www.manomano.fr/p/pince-crocodile-600-a-noire-sz61-set-2105400-6013221 - Pince crocodile 600 A] pour la masse [https://www.manomano.fr/pince-porte-electrode-2739 - Pince porte-électrode]te-electrode-2739 - Pince porte-électrode])
  • Thrifty and stand-alone water point  + (1 wooden box 1 plastic bottle 1 wooden b1 wooden box 1 plastic bottle 1 wooden batten 1 small wooden plank (6x8 cm - 2,37x3,15 inch) 1 piece of iron wire 1 thin silicone tube (ex : baby nose cleaner, breast pump ...) 1 elastic 1 big nail (7 to 8 cm - 2,75 to 3,14 inch) A few screws 1 staple2,75 to 3,14 inch) A few screws 1 staple)
  • Batteries recovery  + (1- Computer battery 2 - Solar panel (e.g.1- Computer battery 2 - Solar panel (e.g. 5V-6V mini solar panel) 3 - Charge and discharge controller (e.g. 4-8V 1A Charging Module Mini Li-ion USB Arduino) 4 - Tension regulator : DC/DC booster MT3608 (electrical component which transforms the 3.7 V current from the batteries to 12 V) 5 - LED Lamp (e.g. 2 strips of 5 SMD 5050 LEDs) 6 - Light switch (to open the circuit and cut off the light) 7 - Box (cardboard, wood, 3D printed...) with 2 openings to fit the solar panel and the light diffuser (plan to also fit the light switch and USB output) 8 - Light diffuser (for diffusing light from LEDs) 9 - Tape (for diffusing light from LEDs) 9 - Tape)
  • Hydroponics  + (1. Crop gutters * Cleats (minimum width 11. Crop gutters * Cleats (minimum width 10cm) * Plastic sheeting * Staples * Clay beads
    Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots
    * Brackets * Wood screws * Young shoots and cuttings 2. Irrigation system * 1 Submersible pump (aquarium pump) * 5 m of thin plastic pipe (pump outlet) * 1 End cap with 4 outlets for fine pipe * 50 cm of wide plastic tube (Link between the filter and the bio-filter) * 1 Wide pipe end cap (to be fixed on the filter tank) * 1 Blower 3. Filter and bio-filter * 2 plastic bins of 60L * Large gravel * Sand * 10L Clay beads * 40L of water [[:Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation.]] 4. Control system * Socket outlet with programmable timer or Arduino
    [[:Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation.]] 4. Control system * Socket outlet with programmable timer or Arduino)
  • Hydroponie  + (1. Gouttières de cultures *Tasseaux (10cm1. Gouttières de cultures *Tasseaux (10cm de largeur minimum) *Bâche plastique *Agrafes *Billes d'argiles
    Préférer les petites billes d'argiles, celles-ci sont plus lourdes et permettront un meilleur maintien des racines
    *Équerres *Vis à bois *Jeunes pousses et boutures 2. Système d'irrigation *1 Pompe immergée (pompe d'aquarium) *5 m de tuyau plastique fin (Sortie pompe) *1 Embout avec 4 sorties pour tuyau fin *50 cm de tuyau plastique large (Lien entre le filtre et le bio-filtre) *1 Embout de tuyau large (à fixer sur le bac du filtre) *1 Bulleur 3. Filtre et bio-filtre *2 Bacs en plastique de 60L *Gros gravier *Sable *10L Billes d'argile *40L d'eau
    Afin d'assurer une homogénéité de l'eau en nutriments et en température, nous conseillons d'utiliser environ 40L d'eau par mètre carré de culture.
    4. Système de commande *Prise de courant avec minuterie programmable ou Arduino
    eau par mètre carré de culture. </div> </div> 4. Système de commande *Prise de courant avec minuterie programmable ou Arduino)
  • Hydroponie  + (1. Gouttières de cultures *Tasseaux (10cm1. Gouttières de cultures *Tasseaux (10cm de largeur minimum) *Bâche plastique *Agrafes *Billes d'argiles
    Préférer les petites billes d'argiles, celles-ci sont plus lourdes et permettront un meilleur maintien des racines
    *Équerres *Vis à bois *Jeunes pousses et boutures 2. Système d'irrigation *1 Pompe immergée (pompe d'aquarium) *5 m de tuyau plastique fin (Sortie pompe) *1 Embout avec 4 sorties pour tuyau fin *50 cm de tuyau plastique large (Lien entre le filtre et le bio-filtre) *1 Embout de tuyau large (à fixer sur le bac du filtre) *1 Bulleur 3. Filtre et bio-filtre *2 Bacs en plastique de 60L *Gros gravier *Sable *10L Billes d'argile *40L d'eau
    Afin d'assurer une homogénéité de l'eau en nutriments et en température, nous conseillons d'utiliser environ 40L d'eau par mètre carré de culture.
    4. Système de commande *Prise de courant avec minuterie programmable ou Arduino
    eau par mètre carré de culture. </div> </div> 4. Système de commande *Prise de courant avec minuterie programmable ou Arduino)
  • Coltura Idroponica  + (1. Grondaie di coltivazione *Listelli (la1. Grondaie di coltivazione *Listelli (larghi almeno 10 cm) *Telo di plastica *Graffette *Palline di argilla
    Sono da preferire le palline di argilla piccole perché sono più pesanti e permettono un mantenimento ottimale della salute delle radici
    *Staffe *Viti per legno *Talee e germogli 2. Sistema di irrigazione *1 Pompa sommergibile (pompa per acquario) *5 m di tubo di plastica fine (Uscita pompa) *1 Rubinetto a 4 vie per tubo fine *50 cm di tubo di plastica largo (Collegamento tra il filtro e il bio-filtro) *1 Rubinetto per tubo largo (da collegare al serbatoio del filtro) *1 Gorgogliatore 3. Filtro e biofiltro *2 Bidoni di plastica da 60 L *Ghiaia grossa *Sabbia *10 L di palline di argilla *40 L di acqua
    Per garantire l’omogeneità dell'acqua in termini di nutrienti e di temperatura, consigliamo di utilizzare circa 40 litri di acqua per metro di coltura.
    4. Sistema di controllo *Presa di alimentazione con timer programmabile o Arduino
    di acqua per metro di coltura.</div> </div> 4. Sistema di controllo *Presa di alimentazione con timer programmabile o Arduino)
  • Wtl  + (1x couvercle de la chasse d'eau modifier e1x couvercle de la chasse d'eau modifier en plastic recycler avec bague en polyester et un etonnoir en plastic récupérer. 2 à 8 x seaux (arrosoirs) en caoutchouc souple, marque Red Gorilla, chacun sa bague en '''S''' 1 x bac de 14l caoutchouc souple, marque Red Gorilla, la dedans en prendre notre douche. Après 2 minutes il est plein. Écope avec la grande Becprès 2 minutes il est plein. Écope avec la grande Bec)
  • Insulated Solar Electric Cooker (ISEC)  + (<br/> * High Temperature Wire: If y
    * High Temperature Wire: If you have heavy gauge wire around you can use it, but for short runs in the amperage needed for most ISECS, 14 - 16 gauge is fine. * Metal Shears -- Brand name “aviation shears” are the best. Ideally, you want one straight cut * Nichrome Wire * Aramid or other non-flammable fabric * High Temperature RTV Silicon * Thermal Switches * Heavier Aluminum Foil * High Temperature Ceramic Beads * Silicon Tubing, High Temperature (for steam venting) * Inexpensive Wire Stripper/ Crimper/ Cutter * Duct Metal * Refractory Cement * Rockwool Batts * Aluminum Tape
    fractory Cement * Rockwool Batts * Aluminum Tape)
  • Insulated Solar Electric Cooker (ISEC)  + (<br/> * High Temperature Wire: If y
    * High Temperature Wire: If you have heavy gauge wire around you can use it, but for short runs in the amperage needed for most ISECS, 14 - 16 gauge is fine. * Metal Shears -- Brand name “aviation shears” are the best. Ideally, you want one straight cut * Nichrome Wire * Aramid or other non-flammable fabric * High Temperature RTV Silicon * Thermal Switches * Heavier Aluminum Foil * High Temperature Ceramic Beads * Silicon Tubing, High Temperature (for steam venting) * Inexpensive Wire Stripper/ Crimper/ Cutter * Duct Metal * Refractory Cement * Rockwool Batts * Aluminum Tape
    fractory Cement * Rockwool Batts * Aluminum Tape)
  • Solar Generator Trailer- Electrical System  + (<br/> <table class="wikitable">
    Quantity Designation New Material Price Project Material Price (donation, second-hand, reclaimed)
    3 Peimar 330W Solar Pannel 500 105
    1 Victor Energy Phoenix 24V/1200VA Inverter 503 200
    1 Schneider Electric Connext 60A/150V MPPT charge controller 650 0
    12 Hawker 4PzS240 traction battery - 2V 240Ah 1980 650
    1 Victron Energy BMV700 battery controller + crimped cable + wall bracket + VE Direct Bluetooth Smart Dongle 250 250
    1 Fuse MEGA-Fuse 125A / 32V (x5) + Fuse holder MEGA Victron Energy 33 33
    1 Schneider Electric C120N 125A Circuit Breaker 320 0
    2 Schneider Electric iC60N 63A Circuit Breaker 25 0
    1 Schneider Electric Resi9 10A Circuit Breaker 15 0
    1 Schneider Electric 30mA/40A differential Circuit Breaker 90 0
    16m 1x4mm² red/black solar cable with MC4 connector 24 0
    1 Male MC4 Connector 4 0
    1 Female MC4 Connector 4 0
    6m Red / blue / green-yellow cable 1x16mm² 16 16
    6 Tubular battery terminal 16mm²-12 4 4
    2 Tubular battery terminal 35mm² - 10 2,6 2,6
    6 Gray PG16 cable gland + Washer 11,5 11,5
    6 Gray PG11 cable gland + Washer 9,5 9,5
    1 Bloc multiprise extérieur IP44 14 14
    TOTAL 4442 € (~4,764.22 $USD) 1282 € (~1,375.00 $USD)
    gt; <td>1 </td><td>Male MC4 Connector </td><td>4 </td><td>0 </td></tr><tr> <td>1 </td><td>Female MC4 Connector </td><td>4 </td><td>0 </td></tr><tr> <td>6m </td><td>Red / blue / green-yellow cable 1x16mm² </td><td>16 </td><td>16 </td></tr><tr> <td>6 </td><td>Tubular battery terminal 16mm²-12 </td><td>4 </td><td>4 </td></tr><tr> <td>2 </td><td>Tubular battery terminal 35mm² - 10 </td><td>2,6 </td><td>2,6 </td></tr><tr> <td>6 </td><td>Gray PG16 cable gland + Washer </td><td>11,5 </td><td>11,5 </td></tr><tr> <td>6 </td><td>Gray PG11 cable gland + Washer </td><td>9,5 </td><td>9,5 </td></tr><tr> <td>1 </td><td>Bloc multiprise extérieur IP44 </td><td>14 </td><td>14 </td></tr><tr> <td>TOTAL </td><td> </td><td>4442 € (~4,764.22 $USD) </td><td>1282 € (~1,375.00 $USD) </td></tr></table>)
  • Tranformer un smart-phone en smart-ordi  + (<div class="icon-instructions caution-i
    Nous avons testé uniquement les smartphones Android pour ce tuto.
    *1 smartphone, vérifiez le branchement (USB C ou micro USB) *1 câble d’extension OTG USB vers USB C ou micro USB en fonction de votre téléphone *1 mini clavier azerty avec câble USB sans rétro-éclairage *1 hub 4 ports usb (pour brancher téléphone, clavier, souris et éventuellement une clé USB) *1 mini souris de voyage rétractable avec câble USB *1 aimant pour téléphone (voir système d’accrochage pour moto ou voiture)
    e avec câble USB *1 aimant pour téléphone (voir système d’accrochage pour moto ou voiture))
  • Tranformer un smart-phone en smart-ordi  + (<div class="icon-instructions caution-i
    Nous avons testé uniquement les smartphones Android pour ce tuto.
    *1 smartphone, vérifiez le branchement (USB C ou micro USB) *1 câble d’extension OTG USB vers USB C ou micro USB en fonction de votre téléphone *1 mini clavier azerty avec câble USB sans rétro-éclairage *1 hub 4 ports usb (pour brancher téléphone, clavier, souris et éventuellement une clé USB) *1 mini souris de voyage rétractable avec câble USB *1 aimant pour téléphone (voir système d’accrochage pour moto ou voiture)
    e avec câble USB *1 aimant pour téléphone (voir système d’accrochage pour moto ou voiture))
  • Multifunctional Crankset  + (<div class="mw-translate-fuzzy"> *Bi
    *Bike with derailleur gears *Belts of different sizes (to be measured depending on your mounting. They can be found in lawnmowers, or in garages) *Fasteners, eye straps and metal corner braces *Wood (battens, plywood, pallet boards) *Pulleys around 60mm in diameter (can be found in hardware stores)
    iameter (can be found in hardware stores) </div>)
  • Fermented drinks - Homemade sodas  + (<div class="mw-translate-fuzzy"> *Fruit peels or rinds (orange, lemon, ginger, kiwi, mango, pineapple...) *Sugar (white, brown) *Water </div>)
  • Lámpara solar con baterías de litio recuperadas.  + (<div class="mw-translate-fuzzy"> *Ba
    *Batería de ordenador portátil usada (Li-ion 18600)
    *Soportes de baterías Li-ion 18600
    *Panel solar 5V-6V / 1-3W *Un regulador de carga y descarga (ej: 4-8V 1A Módulo de carga Mini Li-ion USB Arduino [https://www.ebay.fr/itm/TP4056-Micro-USB-Module-de-Chargeur-5V-1A-Charge-Batterie-Lithium-Li-ion-Arduino-/253428065837 TP4056]) *Regulador de tensión: [https://www.addicore.com/MT3608-Boost-Converter-p/ad300.htm DC/DC DC/DC booster] MT3608 (componente eléctrico que transformará los 3,7 V de las baterías en 5 V).
    *Una lámpara LED (ej : [https://www.ebay.com/b/3-W-LED-Light-Bulbs/20706/bn_7115563288 LED 3W] )
    *Un interruptor (para cerrar el circuito y apagar la lámpara). *Cinta eléctrica *Una carcasa (ajustar el material según el modelo eligido : ver pasos 7 u 8)
    *Una carcasa (ajustar el material según el modelo eligido : ver pasos 7 u 8))
  • Fogger  + (<div class="mw-translate-fuzzy"> PVC tube diameter 60 </div>)
  • Wind turbine  + (<u>Wind turbine</u> 1- A woodWind turbine 1- A wooden plank (minimum 10mm thick) 2- A piece of flat steel (minimum 2mm thick) 3- A stepper motor from a printer (with it's connectors) 4- A PVC tube (diameter between 55mm and 100mm; wall thickness minimum 3mm) 5- A bicycle inner tube 6- Some wood screws Electric circuit : 3- Stepper motor from a printer 8- A support made from plastic, to take the different system components (you could e.g. use a flat part of the printer housing) 9- Two rectifier diodes or bridge rectifiers 10- One capacitor, 1000µF 16V 11- A voltage stabilizer LM7805 for fixing the voltage at 5V or LM7812 for fixing the voltage at 12V 11'- Instead of the tension stabilizer you could also use a voltage amplifier or a DC/DC booster or even more advance it by supplying the USB connector with a voltage between 0,9 and 5 Volts. 12- An USB connector 13- solder 14- wire Also take a look at global 3D model of this wind turbine after reading. [https://cad.onshape.com/documents/e2f661f83cf12a82e9ecb8f5/w/cd00be7c7cf2b2a8cc586f3c/e/b08da6447db094a9319da5fe]a82e9ecb8f5/w/cd00be7c7cf2b2a8cc586f3c/e/b08da6447db094a9319da5fe])
  • Forno solar (em forma de caixa)  + (A caixa: *9 placas de compensado de 500x5A caixa: *9 placas de compensado de 500x500 mm e espessura de cerca de 10 mm (não muito grossa para que a caixa não fique muito pesada) *Material de isolamento térmico com cerca de 40 mm de espessura (4 chapas de 500x500 mm): poliestireno (vendido em peixaria, em mercados ou em loja de eletrodomésticos), placa de cortiça, vermiculite, etc *4 metros de ripas de madeira da mesma espessura do isolamento *Papel-alumínio ou fita adesiva espelhada (mais cara) *4x40 parafusos (mais ou menos 80) *Pregos de 1,5 x 25 mm (mais ou menos 10) Vidro, moldura e abas: *Vidro de 410x470 mm, não muito grosso, de espessura entre 2 a 3mm (pode ser encontrado entre restos do lixo de um vidraceiro) *Placas de madeira-aglomerado da mesma espessura que o vidro, uma de 500x500 mm e outra de 500X550 mm *Paletes/tábuas de madeira (8 placas de cerca de 500x60 mm) e não muito grossas (cerca de 20 mm) *1 metro de dobradiça fina com parafusos de cabeça plana ou 6 dobradiças *3 metros de cordões (4 mm de diâmetro) *Vedaçãoos de cordões (4 mm de diâmetro) *Vedação)
  • Joyeux Bidon Low-tech - Enceinte fabriquée avec des composants de réemploi  + (Base: 2 Bidons 5L plastique 1 Paire d'enBase: 2 Bidons 5L plastique 1 Paire d'enceintes amplifiées de PC Electronique: *1 Carte micro-contrôleur programmable stm32F4Discovery *1 Clef USB *1 Convertisseur secteur USB 230V/5V *10 Fils électriques *2m Fils électrique 0.4mm souple *1 Câble USB femelle / USB Mini-b (fabricable avec les deux portions) *1 Câble USB/n'importe quoi *Etain *Gaine thermo-rétractable *1 Convertisseur DC-DC 5V (optionnel) Interface: *1 Ecran LCD compatible STM32 discovery *1 Interrupteur à bascule *2 boutons poussoirs Visserie: *15 vis M4 (dont 8 >1cm et 7>3cm) *4 Vis M2.5 *10 Vis à plastiques 3mm de diamètre (>1cm) *38 Ecrous (33 M4 , 4 M2.5 et 1 adapté au potentiomètre) Bois/métal: *1 Plaque en aluminium (8cm/14cm épaisseur la plus fine possible) ou 1 Plaque en bois (8cm/14cm/2cm) *1 Cornière en aluminium (longueur 10cm, bords transversaux >2.5cm) ou 2 Tasseaux de bois (7cm/2cm/2cm) *3 Plaques en contreplaqué (10cm/10cm/ >0.6cm)cm/2cm) *3 Plaques en contreplaqué (10cm/10cm/ >0.6cm))
  • Worm Compost Bins  + (Large plastic or iron container with lid, Large plastic or iron container with lid, 100 – 200 l Stainless ball or butterfly valvetap (1/2” inch or 3/4” inch) with hydraulic fittings Teflon Rocks, peppels, gravel, or expanded clay balls Sand. Not salty sand from sea! Good loamy soil to 30/40 cm height Cow or horses manure, several big handfuls, broken up Kitchen wastes, a bit. To be added to the system after 10 days Worms (100/ 200, depending on the dimension of the barrel). Better the red worm, they are more active and efficient, even if not local! Dry leaves or straw 2/3 ventilation filter in plastic of 10/12 cm diameter [ Mosquito net can be used instead of the ventilation filters.] silicon Bricks or other material 2 old big T-shit Non-woven blanketrial 2 old big T-shit Non-woven blanket)
  • Chauffage solaire version ardoise  + (Le tutoriel présenté ici fait 2,09m x 1,09Le tutoriel présenté ici fait 2,09m x 1,09m hors tout '''Capteur:''' * Chevron en douglas (Ici la section finale est de 95mm x 45mm) ** 2 de 2m10 ** 2 de 1m10 * 15 m de Liteaux en douglas (20mm x 53mm) * Plaque rigide (ici contreplaqué filmé, 10mm) * Isolant rigide (ici plaque de Steico, 22mm) * Cartouche de sika * Cartouche silicone * Colle PU pour collage bois extérieur * Colle à bois * Clous * Vis à bois, de 30mm à 150mm * Joint compribande * Huile de lin * Vernis bois * 15 m de Liteaux en douglas (30mm x 16 mm) * Adhésif aluminium * Vitre trempé ou plaque polycarbonate (1m x 2m) * Grille en métal déployé (300mm x 50mm) * 4 pattes à vis ([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de larmier aluminium de largeur 100mm ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adhésif double face * Isolant mince (ici isolant de parquet) * 30 à 35 ardoises 320mm x 220mm, épaisseur 3,5mm * 8 équerres renforcées, largeur mini 40mm * 1 tube diamètre 100mm longueur de la paroi de l'habitat, pvc/alu/inox pour l'entrée basse '''Système clapet:''' * [https://www.lextronic.fr/actionneurs-electriques/28536-verin-thermostatique.html 1 Vérin thermostatique Vernet EL 0769] * 100mm de tube laiton diamètre 4mm * [https://www.leroymerlin.fr/v3/p/produits/lot-de-4-ressorts-de-compression-acier-standers-diam-7-9-mm-l-70-x-ep-1-mm-e1401456374?queryredirect=a_fp_lot_de_4_ressorts_de_compression_acier__standers__diam_7_9_mm__l_70_x_ep_1_mm&numpage=1 1 ressort de compression longueur 70mm] * 1 rondelle * 1 petite vis * 2 rivets * 5 cm de fil de cuivre diamètre 2mm * 1 domino électricien diamètre 4mm * Materiel plomberie/gaz: ** 100mm de tube fileté laiton 15/21 ** 2 ecrous borgne laiton 15/21 ** 1 écrou débouchant laiton 15/21 ** 1 manchon cuivre diamètre 12mm ** 1 manchon cuivre diamètre 14mm ** 1 mamelon laiton 15/21 * [https://www.leroymerlin.fr/v3/p/produits/clapet-anti-retour-acier-equation-diam-100-mm-e42735?queryredirect=a_fp_clapet_anti_retour_acier_equation__diam_100_mm&numpage=1 1 clapet ventilation, ici diamètre 100mm] * [https://www.leroymerlin.fr/v3/p/produits/loqueteau-a-bille-laiton-hettich-l-16-x-l-11-mm-e22655 1 loqueteau à bille] * 1 tube alu ou inox à la longueur de la paroi du mur de l'habitat, diamètre du clapet '''facultatif:''' * Pare-pluie * Adhésif d'étanchéitéfacultatif:''' * Pare-pluie * Adhésif d'étanchéité)
  • Solar Oven (box-type oven)  + (The box: * 9 plywood panels of 500x500mm The box: * 9 plywood panels of 500x500mm and around 10mm of thickness (not too thick to not overweight the box) * Isolator of around 40mm of thickness (4 panels of 500x500mm): polystyrene (available at the fishmonger/ at the and of the market or in electric shop), cork panel, vermiculite... * 4 meters of stick (same thickness of the isolator) * Aluminium paper or black tape (more expensive) * Casing assembly 4x40 (around 80) * Nails 1,5x25mm (around 10) Glass, cadre and ears: * Glass of 410x470mm, not too thick, 2 to 3mm (available in carpenters' trashes) * Chipboard panel of the same thickness of the winder, one of 500x500mm and another one of 500x550mm * Wood pallet or wooden board (8 boards of around 500x60mm and not to thick (around 20mm) * 1 meter of thin hinge with flat head screws OR 6 hinges * 3 meters of string (4mm of diameter) * Sealmeters of string (4mm of diameter) * Seal)
  • Black Soldier Fly breeding  + (The materials used will depend on the suppThe materials used will depend on the support used to build the living space of your larvae. This can be done in a wooden box, a drum cut in half, a large plastic box...
    For the boat, we chose a wooden box because we had recovery boards
    For an order of size, our box will allow to treat waste (food and from dry toilets) produced by 3 persons. For the box (120/65/30cm):
    *120/65cm x2 wood boards *120/30cm x2 wood boards *65/30cm x2 wood boards *Iron angles *Hinges *Screw *Paint and varnish *Plastic tray of 100/60/15cm *Plank and pieces of wood to make the ramp *Inner tube *Staples *Plastic box to collect larvae
    For the aviary (80/50/45cm): * Wood bars of 80/5/2cm x4 * Wood bars of 41/5/2cm x2 * Wood bars of 40/5/2cm x2 *50/45cm plywood board (for the bottom) *Hinges *Screw *Angles *Mosquito net *50/10cm board (for opening) For pupae and egg laying: *Cardboard or wooden plates separated by pins *A box to put some waste *A box to put the pupae *Dry substrate (coconut fiber...) *A box for the hydration of flies
    Don't forget to protect the living space from the water. The eggs will burst with water!
    b-o"></i></div> <div class="icon-instructions-text">Don't forget to protect the living space from the water. The eggs will burst with water!</div> </div>)
  • Haybox or fireless cooker made of a wool blanket  + (• A blanket for a double bed (preferably wool) • Fabric • Sewing thread • 2 Velcro strips, approx. 30 cm long)
  • Bait for Melipona bees  + (• Two 2-3 litre plastic bottles • Newspaper • Black plastic bags • Adhesive tape • Iron wire • 90° Alcohol • Bee propolis from the target species)
  • Biofilter  + ( * 2 x 60L containers, e.g. plastic rubbi * 2 x 60L containers, e.g. plastic rubbish bins (preferably made of solid, durable inert plastic) * 1 x lid * 1 x 15L (approx.) bowl of an equal diameter to the container (preferably made of solid durable inert plastic) * Water pump/airlift pump for pond or aquarium min. 300 L/hour to a height of 1m * 50cm hose pipe (with a diameter which will fit the pump output) * Expanded clay ball or porous volcanic rock (microporous materials are good for making a solid habitat for mirco-organisms): approximately 5L for the biofilter and 5L for the worm composter (bedding material for drainage) * Straw/dried vegetation (habitat made of materials high in cellulose for micro-organisms), approximately 5L for the biofilter and 5 L for the worm composter * Water: approximately 40L * Fungi (Trichoderma or Strepomyces) (GHE - BM or Subculture) or rotting organic matter, * A good selection of earthworms (min. 50) * A good selection of earthworms (min. 50) )
  • Bruleur à paraffine  + ( # Paraffine # Cellulose pure (papier toilette, essais tout, etc.) # Eau (de préférence, c'est plus facile pour conformer la cellulose; cf. outils). )
  • Poelito - Estufa de masa semi desmontable  + ('''El metal''' * Recipiente metálico * Fum'''El metal''' * Recipiente metálico * Fumistería (tubos de diferentes diámetros y T) * Rejilla de alcantarillado '''Ferretería:''' * Tornillos autoperforantes, * Tornillos + tuercas '''El hormigón:''' * Grapa para la compactación y el montaje de hormigón, * Alambre de hierro * Tejido viejo para colocar en la lata cuando se trabaja para amortiguar el ruido. * Encofrado perdido * Embalaje de plástico (celofán), * Cinta de construcción naranja * Cinta de marcar, * Cartón corrugado, * Tubos de cartón con un diámetro de 80, 100 o 130 mm,artón con un diámetro de 80, 100 o 130 mm,)
  • 200W Wind Turbine  + ('''List of materials required for the prop'''List of materials required for the propeller, refer to the chapters for details''' * Scraps of plywood * Plank section minimum 95mm x 35mm, length 1m80. (red cedar or douglas or larch or spruce ) *Plywood 9mm * Some screws of diameter 5mm, length 30mm. '''List of materials required for the generator, refer to the chapters for details''' * Metal disc of thickness 8mm and diameter 140mm. * Rear wheel hub of golf, corsa, polo or Ibiza. * 25cm of threaded rods with diameter 12mm. * Pack of nuts of 12mm. * 30cm threaded rods of diameter 10mm, 4 nuts of 10mm. * Scraps of metal tube and angle. * 4 nails of diameter 6mm. * 1.5kg of enamelled copper wire, diameter 1.4mm. * Electrical scotch. * Heat-shrink tubes * Plywood 9mm et 16mm. * Glass fiber cloth (approximately 300g/m²) * Polyester resin, associated catalyst * Talc. * Mould release wax * 8 neodymium magnets. * Steel disc of diameter 230mm, thickness 6mm. * Bolts 12mm. '''List of materials required for the steel structure, refer to the chapters for details''' * Angle of 206mm (50x50x6mm). * Tube of outer diameter 42.2mm, length 100mm. * Tube of outer diameter 33.4mm, length 150mm. * Tube of outer diameter 42.2mm, length 130mm. * Iron plate 50 x 50 x 6mm. * Tube of outer diameter 33.4mm, length 700mm. * Angle 30 x 30 x 5, length 250mm. * 60 cm of threaded rods with diameter 12mm.60 cm of threaded rods with diameter 12mm.)
  • Poelito - Aquecedor-a-lenha semi-desmontável  + ('''Metal''' * Tambor de metal * Chaminé (t'''Metal''' * Tambor de metal * Chaminé (tubos de diferentes diâmetros e tubo T) * Grade de bueiro '''Ferragens:''' * Parafusos autoperfurantes * Parafusos + porcas '''Concreto armado (betão): ''' * Ripa de madeira para compactar e endireitar o concreto * Arame * Tecido velho para pôr no tambor, para abafar o ruído, na hora da construção '''Fôrma (cofragem)''' * Plástico de embalagem (celofane) * Fita adesiva de construção laranja * Fita adesiva de demarcação * Papelão ondulado * Tubos de papelão com diâmetro de 80, 100 ou 130 mm,papelão com diâmetro de 80, 100 ou 130 mm,)
  • Semi-removable Mass Stove  + ('''Metalwork''' * Metal drum * Pipework (t'''Metalwork''' * Metal drum * Pipework (tubes of differing diameters and T-tube) * Sewer grate '''Ironmongery:''' * Self-tapping screws, * Nuts and bolts '''Concrete: ''' * Tamper for packing down and applying the concrete, * Wire, * An old cloth to put in the drum to deaden the noise whilst you are working. '''Moulds:''' * Plastic packaging (cellophane), * Gaffer tape * Masking tape, * Corrugated cardboard, * Cardboard tubes of 80, 100, 130mm diameters respectivelys of 80, 100, 130mm diameters respectively)
  • Manual Pump (vertical)  + ( * The parts for the pump mentioned here * The parts for the pump mentioned here are all made of PVC: * 3 adapters 50mm-25mm * 2 couplings 50mm diameter * 1 tee 50mm-25mm * 1 or 2 elbows 25mm (in accordance with requirements for water outlet) * 1 - 2 metres of 25mm diameter tubing (in accordance with requirements for water outlet) * 1 - 2 metres tubing 50mm diameter * 2 (glass) marbles with a diameter greater than 25mm, * 2 screws 50mm long (minimum) For the piston: * 1 - 2 metres of tubing 40mm, * 1 Tee XXmm-40mm * 1 x tube cap 40mm (or preferably slightly larger) * acetone (or similar solvent) tly larger) * acetone (or similar solvent) )
  • Compost Bokashi di cucina  + ( * 3 secchi alimentari da 5L (ricuperabili * 3 secchi alimentari da 5L (ricuperabili nella ristorazione) e un coperchio che permette una chiusura ermetica. 1 secchio é il "secchio compost". 1 secchio é "il rialzo". 1 secchio é il "contenitore". 1 rubinetto adattabile per fusti in plastica (fornito con guarnizione e dado di serraggio). * 1L di pietra pomice o ghiaia di circa 3mm di diametro. * Rifiuti organici. * 1 flacone di microrganismi efficaci attivati (EM 1) (disponibile qui, ad esempio, da Bertrand Grevet, Synbiovie, specialista francese) e/o 1 bustina di crusca di grano inseminata dagli EM (disponibile qui). rano inseminata dagli EM (disponibile qui). )
  • Tent heating stove  + ( * A part of a metal pipe at the scrapyard (diameter 20cm / Thickness 4mm) * Metal sheet 2mm thickness * Metal wire 2mm diameter you can weld * An hinge you can weld * Some scrap bars (minimum 6mm diameter) * Metal net )
  • Extinguisher  + ( * A plastic bottle of 2L * A fine plastic * A plastic bottle of 2L * A fine plastic bag (for fruits for example) * A big nail (100 mm x 4 mm) * A BIC pencil spring * A cork * Paperclips or pieces of metal (drilling drops for example) * Masking tape (for painting) * 750 mL of alcohol vinegar * 750 mL of water * 105 g of baking soda * One tablespoon of dishwashing liquid soda * One tablespoon of dishwashing liquid )
  • Simple powerbank  + ( * A used laptop battery. * A "[http://www * A used laptop battery. * A "[http://www.conrad.fr/ce/fr/product/651027/Support-pile-1x-18650-Keystone-1043-montage-THT-L-x-l-x-h-77-x-2065-x-1486-mm lithium-ion battery holder]", if possible with wire. * A [https://www.ebay.fr/itm/2in1-charge-discharge-board-module-f-18650-lithium-battery-DIY-Power-Phone-Bank-/252442590514 load / unload module]. * Tin wire. * A container for the components: here plastic tube / inner tube and bottle cap. e plastic tube / inner tube and bottle cap. )
  • Buried Aymarian Greenhouse  + ( * Adobe (using bricks of clay and straw) to build the walls, * Bricks to build columns to support the roof * Wood for the framework * Plastic (agroplastico) tarpaulin for the roof * mud and/or black nets to control the temperature )
  • Biofiltre pour bioponie  + ( * Bonbonne d'eau de 20L, usagée. * Grilla * Bonbonne d'eau de 20L, usagée. * Grillage fin ou moustiquaire. * Robinet de cuve. * Scotch. * Tissu opaque (facultatif). * Bulleur d'aquarium. * Tuyau adapté au bulleur (environ 1m) + jonctions. * Tube plastique de 8mm de diamètre et de la hauteur de la bonbonne. * couvercle bombé ou assiette usagée d'un diamètre un peu plus petit que la bonbonne. * Élastique permettant d'enserrer la bonbonne. * Roche volcanique ou bille d'argile et paillis sec (environ 5L). '''Remarque''': Cette liste de matériaux est à adapter en fonction des ressources disponibles à chacun. nction des ressources disponibles à chacun. )
  • Desert fridge - light version  + ( * Container of the desired size, either in plastic either in any other sand-proof material * Fabric with a thin stitch * Board, either in wood either any other material * Little plastic hose with a tap * Bottle of 5 or 6 litters * Sand )
  • Wüstenkühlschank leichte Version  + ( * Flasche in der gewünschten Größe, aus Kunststoff oder anderem sanddichtem Material. * Feinmaschiges Gewebe * Holz- oder andere Bretter * Kleines Kunststoffrohr mit Gewindebohrer * Flasche mit 5 oder 6 Liter Inhalt * Sand )
  • Versión ligera del refrigerador del desierto  + ( * Lata del tamaño deseado, hecha de plástico u otro material a prueba de arena * Tejido de malla fina * Tablero de madera u otro * Manguera de plástico pequeña con grifo * Botella de 5 o 6 litros * Arena )
  • Rideau thermique - prototype 1  + ( * Partie bleue du masque : - Waterproof * Partie bleue du masque : - Waterproof * Partie Inter-couche du masque (partie blanche) : - Contient du polypropylène (High durability - excellent insulation- recyclable …) * Paquet de chips vide (contient de l’aluminium): - Couche réfléchissante de la chaleur * Sponge: - Pour séparer les douches de l’aluminium, pour créer un espace vacant entre deux couches d’aluminium pour augmenter isolation thermique (R-value). * Carton: - Plus spécifiquement dans les places ou passe la couture, pour que les deux couches d’aluminium ne se colle par entre eux, comme ça on évite la transmission thermique. omme ça on évite la transmission thermique. )
  • Batería externa sencilla  + ( * Una batería de ordenador portátil usada * Una batería de ordenador portátil usada. * Un "[http://www.conrad.fr/ce/fr/product/651027/Support-pile-1x-18650-Keystone-1043-montage-THT-L-x-l-x-h-77-x-2065-x-1486-mm soporte para pilas de ion de litio]", con cable, a ser posible. * Un [https://www.ebay.fr/itm/2in1-charge-discharge-board-module-f-18650-lithium-battery-DIY-Power-Phone-Bank-/252442590514 módulo de carga/descarga]. * Cable de estaño. *Un tubo de plástico/una cámara de aire y un tapón de botella para proteger los componentes. n de botella para proteger los componentes. )
  • Solar desalinator  + ( * Wooden cleats (used in this tutorial: 44 * 22mm) * Small plastic tube diameter 5 or 6 mm * Two bottles of 5 or 6 liters * Strong and transparent plastic tarpaulin * Cotton fabric * Blanket * Wood screws * Inner tube )
  • Enhanced cooker  + ( * rocks * clay *salt *pig hair * donkey's dung which has previously fermented for 5 days in plastic tarpaulin * straw * water * sheet metal / iron armatures for the chimney )
  • Filtro de agua de cerámica  + ( *Arcilla * Virutas de madera * Plata * Envase de plástico con un grifo )
  • Cría de grillos comestibles  + ( *Caja estanca *Cartones: tipo bandeja de huevos *Un vaso de plástico *2 recipientes (plato) * Una bandeja *Malla fina *Fibra de coco o materia seca molida *Alimentos para grillos (aquí trigo finamente triturado) )
  • Multi-cocina solar  + ( *Placas de poliestireno *Chapa de madera *Cristal de 8mm de espesor (50cmX50cm) *Cinta de aluminio o manta de supervivencia (lado plateado hacia afuera) *Remaches Pop *Cámaras de aire *Cuerdas *Tornillos )
  • Multicuiseur solaire  + ( *Plaques de polystyrène *Plaques de bois *Vitre de 8mm d'épaisseur (50cmX50cm) *Scotch Aluminium ou couverture de survie (côté argent vers l'extérieur) *Rivets pop *Chambre à air *Cordes *Vis )
  • Solarherd  + ( *Polystyrolplatten *Holzplatten *8mm dick Schiebe (50cmX50cm) *Aluklebeband oder Rettungsdecke (silberne Seite nach außen) *Pop-Nieten *Schlauch *Stricke *Schrauben )
  • Potabilizadora solar  + ( *Rastreles de madera (usados en este tuto *Rastreles de madera (usados en este tutorial: 44*22mm) *Tubo de plástico pequeño de 5 o 6 mm de diámetro *Dos botellas de 5 o 6 litros *Lonas de plástico fuertes y transparentes *Tejido de algodón *Manta de supervivencia *Tornillos para madera *Cámara de aire ncia *Tornillos para madera *Cámara de aire )
  • mpishi wa jua mbalimbali  + ( *Safu za polystyrene * Mbao za mbao * Kioo 8mm nene (50cmX50cm) * Scotch aluminium au blanketi ya kuishi (fedha nje) * Rivets za pop * Tube ya ndani * String * Screw )
  • Extintor de incendios  + ( *Una botella de plástico de 2L *Una bolsa *Una botella de plástico de 2L *Una bolsa plástica delgada (para frutas por ejemplo) *Un clavo grande (100 mm x 4 mm) *Un resorte de bolígrafo BIC *Un tapón de corcho. *Clips o trozos de metal (por ejemplo, trozos de taladro) *Cinta adhesiva (para pintar) *750 ml de vinagre de alcohol *750 ml de agua *105 g de bicarbonato de sodio *Una cucharada de líquido lavaplatos sodio *Una cucharada de líquido lavaplatos )
  • Hidroponia  + (1. Calhas de cultivo * Ripas (largura mín1. Calhas de cultivo * Ripas (largura mínima de 10 cm) * Lona plástica * Grampos * Bolas de argila expandida
    De preferência as pequenas bolas de argila expandida, estas são mais pesadas e permitirão uma melhor fixação das raízes
    *Mão francesa * Parafusos de madeira *Brotos e mudas jovens 2. Sistema de irrigação *1 bomba submersível (bomba de aquário) *5 m de tubo plástico fino (saída da bomba) *1 torneira de 4 vias para mangueira fina *50 cm de tubo de plástico grosso (ligação entre o filtro e o filtro biológico) *1 conector para mangueira grossa (para ser conectado ao tanque do filtro) *1 bombinha de ar 3. Filtro e filtro biológico *2 tanques de plástico de 60L *Cascalho grosso *Areia *10L bolas de argila *40L de água
    Para garantir uma homogeneidade da água em nutrientes e temperatura, recomendamos o uso de aproximadamente 40L de água por metro quadrado de cultura.
    4. Sistema de controle *Tomada elétrica com temporizador programável ou Arduino
    por metro quadrado de cultura.</div> </div> 4. Sistema de controle *Tomada elétrica com temporizador programável ou Arduino)
  • Hidroponía  + (1. Canalones de cultivo *Rastreles (mínim1. Canalones de cultivo *Rastreles (mínimo 10 cm de ancho) *Lona de plástico *Grapas *Bolas de arcilla
    De preferencia que sean bolas de arcilla pequeñas, ya que estas son más pesadas y permiten un mejor mantenimiento de las raíces.
    *Escuadra *Tornillos para madera *Brotes de planta y esquejes 2. Sistema de riego *1 bomba sumergible (bomba para acuario) *5 m de manguera de plástico delgada (salida de bomba) *1 grifo con cuatro salidas para la manguera *50 cm de manguera de plástico ancha (enlace entre el filtro y el biofiltro) *1 grifo para manguera ancha (para conectar a la caja del filtro) *1 difusor de burbujas 3. Filtro y biofiltro *2 cajas de plástico con capacidad de 60 L *Grava gruesa *Arena *10 L de bolas de arcilla *40 L de agua
    Para asegurar la homogeneidad de los nutrientes y la temperatura del agua, se recomienda utilizar aproximadamente 40 litros de agua por metro cuadrado de cultivo.
    4. Sistema de control Tomacorriente con temporizador programable o Arduino
    e agua por metro cuadrado de cultivo.</div> </div> 4. Sistema de control Tomacorriente con temporizador programable o Arduino)
  • Domestic mealworm farming  + (3 plastic bins flour, box of eggs live mealworms: - https://www.venteinsecte.fr/ - https://www.vente-insecte.com/produit/vers-de-farine/)
  • Manual pump (vertical)  + (All these pieces are here in PVC for the All these pieces are here in PVC for the pump : - 3 adapter 50mm-25mm - 2 couplings 50mm - 1 T 50mm-25mm - 1 or 2 25mm elbows (depending on water outlet requirements) - between 1 and 2 metres of 25mm tube (depending on water outlet requirements) - between 1 and 2 meters of 50mm tube - two balls over 25mm in diameter (glass balls) - 2 screws at least 50 mm long for the piston : - between 1 and 2 meters of 40mm tube - 1 T XXmm-40mm - 1 tube cap of 40mm, if possible a little wider paint stripper (acetone type)ittle wider paint stripper (acetone type))
  • Worm Compost Bins  + (Large plastic or iron container with lid, Large plastic or iron container with lid, 100 – 200 l Stainless ball or butterfly valvetap (1/2” inch or 3/4” inch) with hydraulic fittings Teflon Rocks, peppels, gravel, or expanded clay balls Sand. Not salty sand from sea! Good loamy soil to 30/40 cm height Cow or horses manure, several big handfuls, broken up Kitchen wastes, a bit. To be added to the system after 10 days Worms (100/ 200, depending on the dimension of the barrel). Better the red worm, they are more active and efficient, even if not local! Dry leaves or straw 2/3 ventilation filter in plastic of 10/12 cm diameter [ Mosquito net can be used instead of the ventilation filters.] silicon Bricks or other material 2 old big T-shit Non-woven blanketrial 2 old big T-shit Non-woven blanket)
  • Chauffage solaire version ardoise  + (Le tutoriel présenté ici fait 2,09m x 1,09Le tutoriel présenté ici fait 2,09m x 1,09m hors tout '''Capteur:''' * Chevron en douglas (Ici la section finale est de 95mm x 45mm) ** 2 de 2m10 ** 2 de 1m10 * 15 m de Liteaux en douglas (20mm x 53mm) * Plaque rigide (ici contreplaqué filmé, 10mm) * Isolant rigide (ici plaque de Steico, 22mm) * Cartouche de sika * Cartouche silicone * Colle PU pour collage bois extérieur * Colle à bois * Clous * Vis à bois, de 30mm à 150mm * Joint compribande * Huile de lin * Vernis bois * 15 m de Liteaux en douglas (30mm x 16 mm) * Adhésif aluminium * Vitre trempé ou plaque polycarbonate (1m x 2m) * Grille en métal déployé (300mm x 50mm) * 4 pattes à vis ([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de larmier aluminium de largeur 100mm ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adhésif double face * Isolant mince (ici isolant de parquet) * 30 à 35 ardoises 320mm x 220mm, épaisseur 3,5mm * 8 équerres renforcées, largeur mini 40mm * 1 tube diamètre 100mm longueur de la paroi de l'habitat, pvc/alu/inox pour l'entrée basse '''Système clapet:''' * [https://www.lextronic.fr/actionneurs-electriques/28536-verin-thermostatique.html 1 Vérin thermostatique Vernet EL 0769] * 100mm de tube laiton diamètre 4mm * [https://www.leroymerlin.fr/v3/p/produits/lot-de-4-ressorts-de-compression-acier-standers-diam-7-9-mm-l-70-x-ep-1-mm-e1401456374?queryredirect=a_fp_lot_de_4_ressorts_de_compression_acier__standers__diam_7_9_mm__l_70_x_ep_1_mm&numpage=1 1 ressort de compression longueur 70mm] * 1 rondelle * 1 petite vis * 2 rivets * 5 cm de fil de cuivre diamètre 2mm * 1 domino électricien diamètre 4mm * Materiel plomberie/gaz: ** 100mm de tube fileté laiton 15/21 ** 2 ecrous borgne laiton 15/21 ** 1 écrou débouchant laiton 15/21 ** 1 manchon cuivre diamètre 12mm ** 1 manchon cuivre diamètre 14mm ** 1 mamelon laiton 15/21 * [https://www.leroymerlin.fr/v3/p/produits/clapet-anti-retour-acier-equation-diam-100-mm-e42735?queryredirect=a_fp_clapet_anti_retour_acier_equation__diam_100_mm&numpage=1 1 clapet ventilation, ici diamètre 100mm] * [https://www.leroymerlin.fr/v3/p/produits/loqueteau-a-bille-laiton-hettich-l-16-x-l-11-mm-e22655 1 loqueteau à bille] * 1 tube alu ou inox à la longueur de la paroi du mur de l'habitat, diamètre du clapet '''facultatif:''' * Pare-pluie * Adhésif d'étanchéitéfacultatif:''' * Pare-pluie * Adhésif d'étanchéité)
  • Insulated mattress  + (Life jackets foam 2 survival blankets Plastic tarpaulin (could be replaced by a sewed tarpaulin made from inflatable dinghy's fabric ) Adhesive tape <br/>)
  • Calentador de agua sin electricidad  + (Listado del material necesario: * Dos botListado del material necesario: * Dos botellas de vino 'Crémant du Jura' para compensar el sudor. * Una cocina de leña conectada a la chimenea. * Un calentador de agua antiguo ( no importa que no funcione, solo debe ser impermeable). * Un grupo de seguridad nuevo y preferentemente anti calizo (con asiento de acero inoxidable). * Una pieza en L de bronce del diámetro de la salida de agua fría del calentador de agua (20/27 cm de diámetro). * Un tubo de 12/14 cm para enrollarlo alrededor de la tubería (de aproximadamente 4 metros). * Dos llaves de paso. * Cobre de 12/14 milímetros y varios acoplamientos de bronce (para conectar la pieza en L de bronce en la parte inferior del serpentín y la parte superior a la entrada del agua caliente del calentador, que sustituye la resistencia eléctrica), aunque la cantidad y la longitud del cobre varían según cada caso. * Un tubo de cobre con un diámetro de 14/16 para vincular la entrada de agua fría de su calentador de agua a la red, y luego para vincular la salida del calentador de agua (del agua caliente) al cuarto de baño. *Unas juntas y roscas. * Un metro aproximado de tubo de humo (según su caso), 4 centímetros más alto que el diámetro de su estufa de leña.alto que el diámetro de su estufa de leña.)
  • Cultivo de moscas soldado negra  + (Los materiales utilizados dependerán del sLos materiales utilizados dependerán del soporte utilizado para construir el hábitat de sus larvas. Se puede hacer en una caja de madera, una lata cortada en dos, una caja grande de plástico...
    Para el barco, usamos una caja de madera, ya que teníamos algunos tableros reciclados. !
    Las dimensiones de nuestra caja permiten tratar los residuos (alimentos y residuos secos del baño) de tres personas en promedio. Para la caja (120/65/30cm): *Tableros de 120/65cm x2 *Tableros de 120/30cm x2 *Tableros de 65/30cm x2 *Rastreles de madera *Escuadra Bisagras Tornillos *Pintura y barniz *Recipiente de plástico de 100/60/15cm *Tablillas y pedazos de madera para fabricar la rampa *Cámara de aire *Grapas *Cajas de plástico para recolectar las larvas Pour la jaula (80/50/45cm): *Rastreles de madera de 80/5/2cm x4 *Rastreles de madera de 41/5/2cm x2 *Rastreles de madera de 40/5/2cm x2 *Tablero de contrachapado de 50/45cm (Para el fondo) *Bisagra *Tornillos *Escuadras *Mosquitera *Tablero de 50/10cm (Para la abertura) Para las pupas y la puesta de huevos: *Cartón corrugado o viruta de madera separadas por una chincheta *Una caja para poner algunos residuos *Una caja para poner las pupas Sustrato seco (por ejemplo, fibra de coco) *Una caja para la hidratación de las moscas
    Considera impermeabilizar tu casa si no es resistente al agua. !
    fa-lightbulb-o"></i></div> <div class="icon-instructions-text">Considera impermeabilizar tu casa si no es resistente al agua. !</div> </div>)
  • Criação de Moscas Soldado Negra  + (Os materiais utilizados dependem do suportOs materiais utilizados dependem do suporte utilizado para construir a casa das suas larvas. Ela pode ser feita numa caixa de madeira, num galão cortado ao meio, uma grande caixa plástica....
    Para o barco, nós escolhemos uma caixa de madeira porque nós tínhamos algumas tábuas de madeira de demolição!
    Numa ordem de magnitude de tamanho, as dimensões da nossa caixa permitem de tratar os excrementos (alimentares e provenientes de um banheiro seco) de uma média de três pessoas. Para a caixa (120/65/30cm): *Tábuas de 120/65cm x2 *Tábuas de 120/30cm x2 *Tábuas de 65/30cm x2 *Ripas de madeira *Mão-francesa *Dobradiça *Parafuso *Tinta e verniz *Vasilha de plástico de 100/60/15cm *Tábua e pedaços de madeira para construir a rampa *Câmara de ar *Grampos *Pote de plastico pra capturar as larvas Para o viveiro (80/50/45cm): *Ripa de 80/5/2cm x4 *Ripa de 41/5/2cm x2 *Ripa de 40/5/2cm x2 *Tábua de compensado de 50/45cm (Para o fundo) *Dobradiças *Parafuso *Mão-francesa *Mosquiteiro *Tábua de 50/10cm (Para a abertura) Para as ninfas e ovos: *Papelão ondulado ou placa de madeira separada por um percevejo *Uma caixa para colocar lixo *Uma caixa para colocar as ninfas *Substrato seco (fibra de coco...) *Uma caixa para hidratar as moscas [[:Modèle:Idéia]]
    )
  • Rainwater harvesting  + (PVC pipes of different diameters, bends, junctions, T-shaped pipe a 50 liters container A ping-pong ball)
  • Solar coffee roaster  + (Roaster: *Cement mixer, *Black painting, Roaster: *Cement mixer, *Black painting, *Aluminum sheets, *Isolating material (fiberglass, rock wool, foam,..) Parabola: *Stainless steel or aluminum bars, *Metal frame, sheets of metal, *Wires Mechanical par: *Belt or chain, *Gears (toothed wheels), *Handle or motor or water wheeld wheels), *Handle or motor or water wheel)
  • Stand-Alone Adjustable Sink  + (See the list of materials at the end of the tutorial.)
  • Kivuli cha jadi (au friji ya jangwa) kilichofanywa na sufuria za terracotta inakuwa nzito na vigumu kusafirisha. Toleo iliyotolewa hapa ni laini nyepesi na chini ya gharama kubwa, inayowezekana na vifaa vinavyoweza kupatikana kwa urahisi zaidi. Bahasha ni ya kitambaa, na tank ya ndani inaweza kuwa plastiki, chuma, au nyenzo yoyote ya mchanga-ushahidi. Tank hii ya ndani itafungwa na kuziba au nguo.  + (Tafsiri: Jangwa la friji mwanga version / 2 / sw * Inaweza ya ukubwa uliotaka, uliofanywa kwa plastiki au nyenzo nyingine za mchanga * Fine mesh kitambaa * Bodi ya mbao au nyingine * Hose ya plastiki ndogo na bomba * Chupa cha lita 5 au 6 * Mchanga)
  • Solar air heater  + (The tutorial presented here is 2.09m x 1.0The tutorial presented here is 2.09m x 1.09m overall Sensor: * Chevron Douglas (here the final section is 95mm x 45mm) ** 2 of 2m10 ** 2 of 1m10 * 15 m of douglas sheets (20mm x 53mm) * Rigid plate (here plywood filmed, 10mm) * Rigid insulation (here Steico plate, 22mm) * Sika cartridge * Silicone cartridge * PU glue for outdoor wood gluing * Wood glue * Nails * Wood screws, from 30mm to 150mm * Comprehensive seal * Linseed oil * Wood varnish * 15 m of douglas sheets (30mm x 16 mm) * Aluminum adhesive * Tempered glass or polycarbonate plate (1m x 2m) * Expanded metal grid (300mm x 50mm) * 4 screw legs (example) * 1m of aluminum drip 100mm width (example) * Double-sided adhesive * Thin insulation (here parquet insulation) * 30 to 35 slates 320mm x 220mm, thickness 3,5mm * 8 reinforced squares, mini width 40mm * 1 tube diameter 100mm length of the housing wall, pvc / aluminum / stainless steel for the low entrance Valve system: * 1 Thermostatic cylinder Vernet EL 0769 * 100mm of brass tube diameter 4mm * compression spring length 70mm * 1 washer * 1 small screw * 2 rivets * 5 cm of copper wire diameter 2mm * 1 domino electrician diameter 4mm * Plumbing / gas equipment: ** 100mm of threaded brass tube 15/21 ** 2 brass blind nuts 15/21 ** 1 brass through nut 15/21 ** 1 copper sleeve diameter 12mm ** 1 copper sleeve diameter 14mm ** 1 brass nipple 15/21 * 1 ventilation valve, here diameter 100mm * 1 ball catch * 1 aluminum or stainless steel tube along the wall of the house wall, diameter of the valve '''optional:''' * Rain barrier * Sealant '''optional:''' * Rain barrier * Sealant)
  • چندگانه خورشیدی  + (صفحات پلی استایرن • تخته چوب. • شیشه ای ضخیم 8mm (50cmX50cm) • اسکواچ آلومینیومی یا پتو بقا (سمت نقره به بیرون). • پاپ-پرچین • محفظه هوا • کابل ها • پیچ ها)
  • Cocina Mejorada  + (• Piedras • Arcilla, tierra negra • Sal • Pelos de chancho • Estiércol de burro, que ha fermentado 5 días cubierto con plástico • Paja • Agua • Calamina y fierro para mantener la chimenea)
  • Solar multicooker  + (• Polystyrene boards • Wood boards. • 8mm glass (size: 50cmX50cm) • Aluminium scotch or survival blanket ( silver side outwards ). • Pop-rivets. • Inner tube • Cords. • Screws.)
  • Frigo du désert  + (• 1 pot en terre cuite (ou argile) de 50 x• 1 pot en terre cuite (ou argile) de 50 x 46  cm, de préférence rond (50cm de diamètre) • 1 pot en terre cuite (ou argile) de 30 x 40 cm, de préférence rond (30cm de diamètre) • Environ 45 kg de sable fin • Environ 15 litres d’eau potable* • 1 tissu respirant ou couvercle Adaptabilité : Les dimensions des deux pots varient selon la quantité d’aliments que vous souhaitez pouvoir conserver. Ici nous proposons de construire un Zeer Pot pouvant contenir 12 kg d’aliments. Pour cela il faudra un pot externe de 50 cm de diamètre et un pot interne de 30 cm de diamètre. La taille peut être adaptée en fonction des besoins à condition de respecter les proportions. Précautions sanitaires : Attention : *utiliser une eau souillée risquerait de contaminer les aliments déposés dans le pot interne. Il en sera de même si le sable contient des éléments nocifs comme des hydrocarbures.s éléments nocifs comme des hydrocarbures.)
  • Nevera del desierto  + (• 1 pot en terre cuite (ou argile) de 50 x• 1 pot en terre cuite (ou argile) de 50 x 46  cm, de préférence rond (50cm de diamètre) • 1 pot en terre cuite (ou argile) de 30 x 40 cm, de préférence rond (30cm de diamètre) • Environ 45 kg de sable fin • Environ 15 litres d’eau potable* • 1 tissu respirant ou couvercle Adaptabilité : Les dimensions des deux pots varient selon la quantité d’aliments que vous souhaitez pouvoir conserver. Ici nous proposons de construire un Zeer Pot pouvant contenir 12 kg d’aliments. Pour cela il faudra un pot externe de 50 cm de diamètre et un pot interne de 30 cm de diamètre. La taille peut être adaptée en fonction des besoins à condition de respecter les proportions. Précautions sanitaires : Attention : *utiliser une eau souillée risquerait de contaminer les aliments déposés dans le pot interne. Il en sera de même si le sable contient des éléments nocifs comme des hydrocarbures.s éléments nocifs comme des hydrocarbures.)
  • Frigo du désert  + (• 1 pot en terre cuite (ou argile) de 50 x• 1 pot en terre cuite (ou argile) de 50 x 46  cm, de préférence rond (50cm de diamètre) • 1 pot en terre cuite (ou argile) de 30 x 40 cm, de préférence rond (30cm de diamètre) • Environ 45 kg de sable fin • Environ 15 litres d’eau potable* • 1 tissu respirant ou couvercle Adaptabilité : Les dimensions des deux pots varient selon la quantité d’aliments que vous souhaitez pouvoir conserver. Ici nous proposons de construire un Zeer Pot pouvant contenir 12 kg d’aliments. Pour cela il faudra un pot externe de 50 cm de diamètre et un pot interne de 30 cm de diamètre. La taille peut être adaptée en fonction des besoins à condition de respecter les proportions. Précautions sanitaires : Attention : *utiliser une eau souillée risquerait de contaminer les aliments déposés dans le pot interne. Il en sera de même si le sable contient des éléments nocifs comme des hydrocarbures.s éléments nocifs comme des hydrocarbures.)
  • A wood-saving oven  + (• A metal canister of at least 30 cm in di• A metal canister of at least 30 cm in diameter • Some bricks 4 cm thick maximum • A big bucket • A metal pipe 10 cm in diameter (the length depends on the height of the ceiling in the house and the chimney must exceed the roof by at least 30 cm). • Soil (clay soil if possible) • Cement • A grill whose width is slightly smaller than that of the canister • Wire mesh less than 0.5 cm canister • Wire mesh less than 0.5 cm)
  • Fioriera a risparmio idrico  + (• Bottiglie di plastica (preferibilmente d• Bottiglie di plastica (preferibilmente dello stesso marchio/forma) • Tappi • Tubi • 2 secchi/contenitori • 1 rubinetto • Gocce a gocce • Filo rigido (per fissare bottiglie al sopporto) • 1 tubo (che fungerà da grondaia) • Terra • Semina • Vernice idrorepellente • Piccole pietre / macerieidrorepellente • Piccole pietre / macerie)
  • شمسی ککر  + (• پولسٹریئر بورڈ. • لکڑی کے بورڈ. • ایک 8 ملی میٹر موٹی گلاس (50cmX50cm) • ایلومینیم اسکوچ یا کمبل(بیرونی طور پر چاندی کی طرف)(چاندی باہر کی طرف ). • کیل pop rivets • ہوا خانہ (air chamber) • تار. • سکرو.)
  • Eco-construcción  + (•Tierra, paja, bosta de vaca fermentada, a•Tierra, paja, bosta de vaca fermentada, agua •Clavos, tornillos •Planchas de madera para hacer los ángulos •Botellas de vidrio para dar luz y decorar •Alcohol de quemar, encendedor, cuerda que se quema (no plástico), agua fría o helada para cortar las botellas •Ramas de madera de diámetro 10 cm, y de diametro 3-6cm para la carpintería (pin, pin Oregón, etc) •Planchas de madera aglomerada •Malla, alembro, grapas madera aglomerada •Malla, alembro, grapas)
  • Dry Toilets For Family  + ("Notes" 1) Every measure in this tutorial"Notes" 1) Every measure in this tutorial are only for the stainless steel bucket below and for wood of a thickness of 1,2 in. It will be very simple to adapt the measure depending on the equipment of everyone. 2) It isn't recommended to use any other materials than stainless steel for the bucket. The other materials such as galvanized steel or plastic don't react well with urine through time. Furthermore, you have to make sure the bucket can support the weight of anybody. That's why stainless steel is recommended. * [http://ecotrone.fr/seaux-et-couvercles-inox_2_seau-15-l-sans-base__0901-15.html A stainless steel bucket]. * Classic toilet lid. * [https://lecopot.com/473-thickbox/seau-21l-en-plastique-alimentaire-toilette-seche.jpg A plastic bucket] * A door hinge 4 inches large, preferably stainless steel. * Wood boards/shavings, here 1,2 in thick. * Screws, preferably stainless steel. * Wood glue. * Polyurethane glue. * A lag-screw 4,8 in long. * Sawdust (can be collected at a carpenter). * Dry vegetable matters like straw, dead leaves, etc. * Container allowing to stock sawdust, approximately 20 L. (bucket, bag, etc) * Container allowing to collect the sawdust (small shovel, pot, tin can, etc) * Reclaimed wood or palettes (creation of the composting area).alettes (creation of the composting area).)
  • Biodiesel  + ('''1.1 Oil''' Our approach being the most'''1.1 Oil''' Our approach being the most ecological possible, the oil used for making biodiesel is '''used cooking oil''' collected from all sorts of eating establishments. In order to collect the best sort of oil, talk to the owner of the restaurant as well as the chef so you can explain the purpose of your approach. Collecting oil without permission can be qualified as an offence. Furthermore, make sure you check the quality of the oil collected. Used oil contains free fatty acids. They appear when oil is left in the open air over a certain period of time and becomes rancid or when heated in the presence of water. Frying food (that contains water) therefore causes FFAs to appear in oil. During transesterification, these FFAs react with the catalyst (strong base) and create an unwanted soap. The soap stops the products of the reaction, biodiesel and glycerol, from separating correctly, which creates an emulsion that is difficult to work with. The more the cooking oil is used, the more the concentration in FFAs increases and becomes browner. '''Therefore, try to avoid collecting old, brown oil'''. The better the quality of the oil is, the easier the converting process will be. When making biodiesel, '''prefer''' using oil such as vegetable oil with a neutral pH or nearly neutral such as '''rapeseed, corn oil or sunflower oil'''. These oils have a low freezing point, which means they don't solidify if temperatures drop in winter (freezing temperatures for these oils range from -10°C to -2°C for rapeseed, -15°C for sunflower). '''Avoid peanut, coconut and palm oil or animal fats''' because the temperatures at which they solidify are too high (>10°C), even if biodiesel has a lower freezing point than the oil it originates from. Also ban olive oil that is too acidic, these acids could interfere during the reaction in the creating of biodiesel. '''1.2 Methanol''' Methanol, or wood alcohol, used to be obtained by wood pyrolysis. Nowadays, it is synthesized from natural gas and is mainly used as an antifreeze for coolants, as a solvent for the synthesis of other chemicals or as fuel in the racing field (dragsters, model engines). It can be purchased through suppliers who specialize in chemicals, some DIY stores and garages.
    To make biodiesel, it's important you use methanol that's practically pure (99%).
    It's very flammable and the slightest spark could cause burns or an explosion. It is also toxic and can cause blindness if inhaled or ingested.
    '''1.3 Catalyst''' Either sodium hydroxide (NaOH, caustic soda) or potassium hydroxide (KOH, caustic potash) can be used as a catalyst. They are both corrosive and highly basic. These chemicals are quite common and can be found in DIY stores, on line or through chemical suppliers. KOH and NaOH are both hygroscopic, which means they absorb the humidity in the atmosphere quickly. They become less efficient catalysts in the presence of water: always keep them in sealed, airtight containers. '''NaOH vs KOH, different properties.''' * Sodium hydroxide (NaOH) is less expensive and commonly used to make biodiesel on a small scale. However, sodium hydroxide (NaOH) contaminates the water used for cleaning biodiesel and must not be disposed of in nature. We therefore suggest you don't use it if you cannot ensure water treatment. * Potassium hydroxide (KOH) having higher catalysis properties, is gaining in popularity. Potassium hydroxide (KOH) dissolves easier in methanol and is less sensitive to water. Furthermore, the glycerin obtained through the reaction remains liquid and can be added to compost with more safety or used in small amounts as a supplement for animal feed.
    ed through the reaction remains liquid and can be added to compost with more safety or used in small amounts as a supplement for animal feed.)
  • Baño seco de la casa  + ('''Comentarios''': 1) Todas las medidas e'''Comentarios''': 1) Todas las medidas en este tutorial se aplican sólo a la referencia del cubo de acero inoxidable de abajo y a la madera de 30 mm de espesor. Será fácil adaptar las medidas en función de los equipos disponibles para todos. 2) No se recomienda usar otros materiales que no sean acero inoxidable para el cubo. Otros materiales como la galva o el plástico reaccionan mal a la orina con el tiempo. También es necesario asegurarse de que el cubo puede soportar el asiento de todas las personas, a la que el cubo propuesto cumple plenamente (espesor de acero inoxidable 1,8 mm) *[http://ecotrone.fr/seaux-et-couvercles-inox_2_seau-15-l-sans-base__0901-15.html Cubo de acero inoxidable]. * Asiento de inodoro clásico. * [https://lecopot.com/473-thickbox/seau-21l-en-plastique-alimentaire-toilette-seche.jpg Un cubo de plástico] de recuperación (tipo catering colectivo). *Una bisagra de 100 mm de ancho, preferiblemente de acero inoxidable. *Tablas/raspaduras de madera, aquí 30 mm de grosor. *Tornillos, preferiblemente de acero inoxidable. *Pegamento para madera. *Pegamento de poliuretano. *Un tornillo de 120mm de largo. *Serrín (puede ser recuperado de un carpintero). *Materia vegetal seca como paja, hojas muertas, etc. *Depósito de almacenamiento de serrín, aprox. 20L. (cubo, bolsa, etc.) *Pala para recoger aserrín (pala pequeña, tarro, lata, etc.) *Madera o palets de recuperación (fabricación de la zona de compostaje).ón (fabricación de la zona de compostaje).)
  • Water - Biosand Filter  + ('''Construction of one wooden OHorizons mo'''Construction of one wooden OHorizons mold:''' *4x8 ft. Plywood 3/4 inches thick *Lumber 1.5x1.5 inches (8 pieces 46 cm long, 4 pieces 40 cm long, 4 pieces 35 cm long) *16 Bolts with hex heads and fully threaded *12 hinges with screws about 2.5 inches long *17 nuts *33 washers *75 wood screws, each 4cm long *60 wood screws, each 3cm long *1 Bolt 4-5 inches long '''Construction of the concrete filter body''' *Plastic tubes (polyethylene or vinyl) 6mm (1/4") ID and 9mm (3/8") OD *Sturdy tape *Oil (food grade) *Brush or cloth to apply the oil *12 liters of cement *24 liters of 1mm (0.04") sand *12 liters of 12mm (1/2 ) gravel *12 liters of 6mm (1/4 ) gravel *Water - about 7-10 liters *Soap
    '''Preparation of gravel and sand:''' *Protection (e.g. a tarp or plastic sheets), a roof or building to prevent the sand from getting wet and being contaminated *Clean Water *12mm (1/2") Gravel *6mm (1/4") Gravel *0.7 mm (0.03") Sand   n/a '''Filter Installation''': *Approximately 3 liters of 12mm (1/2") washed gravel (drainage layer) *Approximately 3 1/4 liters of 6mm (1/4") washed gravel (separating layer) *Approximately 25 liters of washed 0.7mm (0.03 ) sand 40-80 liters (10-20 gallons) of water *Chlorine
    40-80 liters (10-20 gallons) of water *Chlorine)
  • Water - Biosand Filter  + ('''Construction d'1 moule en bois OHorizon'''Construction d'1 moule en bois OHorizons:''' *Contreplaqué de 4x8 pieds et 3/4 pouces d'épaisse *Bois de Charpente 1,5 x 1,5 pouces (8 morceaux de 46 cm de long, 4 morceaux de 40 cm de long, 4 morceaux de 35 cm de long) *16 Boulons à têtes hexagonales et entièrement filetés *12 Charnières avec des vis d'environ 2,5 pouces de long. *17 Écrous *33 Rondelles *75 vis à bois de 4cm de long *60 vis à bois de 3cm de long *1 Boulon de 4-5 pouces de long '''Construction du corps de filtre en béton''' *Tubes plastiques (polyéthylène ou vinyle) de 6 mm (¼") ID et 9 mm (3/8") OD *Du ruban adhésif solide *Huile (produits comestibles) *Brosse ou un chiffon pour appliquer l'huile *12 litres de ciment *24 litres de sable de 1 mm (0.04") *12 litres de gravier de 12 mm (½") *12 litres de gravier de 6 mm (¼") *De l'eau - environ 7-10 litres *Savon
    '''Préparation du gravier et du sable:''' *Protection (par exemple une bâche ou des feuilles de plastique), un toit ou bâtiment pour empêcher le sable de se mouiller et d'être contaminé *De l'eau propre *Gravier de 12 mm (½") *Gravier de 6 mm (¼") *Sable de 0,7 mm (0,03 ")     '''Installation d'un filtre''': *Environ 3 litres de graviers 12 mm (½") lavés (couche de drainage) *Environ 3 ¼ de litres de graviers de 6 mm (¼") lavés (couche séparatrice) *Environ 25 litres de sable de 0,7 mm (0,03") lavé 40-80 litres (10 - 20 gallons) d'eau *Du chlore
    40-80 litres (10 - 20 gallons) d'eau *Du chlore)
  • Water - Biosand Filter  + ('''Construction d'1 moule en bois OHorizon'''Construction d'1 moule en bois OHorizons:''' *Contreplaqué de 4x8 pieds et 3/4 pouces d'épaisse *Bois de Charpente 1,5 x 1,5 pouces (8 morceaux de 46 cm de long, 4 morceaux de 40 cm de long, 4 morceaux de 35 cm de long) *16 Boulons à têtes hexagonales et entièrement filetés *12 Charnières avec des vis d'environ 2,5 pouces de long. *17 Écrous *33 Rondelles *75 vis à bois de 4cm de long *60 vis à bois de 3cm de long *1 Boulon de 4-5 pouces de long '''Construction du corps de filtre en béton''' *Tubes plastiques (polyéthylène ou vinyle) de 6 mm (¼") ID et 9 mm (3/8") OD *Du ruban adhésif solide *Huile (produits comestibles) *Brosse ou un chiffon pour appliquer l'huile *12 litres de ciment *24 litres de sable de 1 mm (0.04") *12 litres de gravier de 12 mm (½") *12 litres de gravier de 6 mm (¼") *De l'eau - environ 7-10 litres *Savon
    '''Préparation du gravier et du sable:''' *Protection (par exemple une bâche ou des feuilles de plastique), un toit ou bâtiment pour empêcher le sable de se mouiller et d'être contaminé *De l'eau propre *Gravier de 12 mm (½") *Gravier de 6 mm (¼") *Sable de 0,7 mm (0,03 ")     '''Installation d'un filtre''': *Environ 3 litres de graviers 12 mm (½") lavés (couche de drainage) *Environ 3 ¼ de litres de graviers de 6 mm (¼") lavés (couche séparatrice) *Environ 25 litres de sable de 0,7 mm (0,03") lavé 40-80 litres (10 - 20 gallons) d'eau *Du chlore
    40-80 litres (10 - 20 gallons) d'eau *Du chlore)
  • Ram pump  + ('''Do not use plastic material for the ram'''Do not use plastic material for the ram, whether valves or flaps, as they will wear out very quickly during operation..'''
    This is an example for the case of a ram pump dimensioned in 26/34mm, but it has to be adapted according to the results of the dimensioning (Step 2
    '''To buy:''' * Valve of 26/34mm * 1 Elbow of 26/34 * 3 Male plumbing nipples in 26/34 * 1 Tee of 26/34 * 1 Strainer in 26/34 or a plastic check valve inside (see step 5) * 1 Check valve in 26/34 with stainless steel/brass interior * 2 Valves in 20/27 or 1 valve with drain valve * 1 Cross of 20/27 * 1 Reduction from 26/34 to 20/27 * 1 or 2 Teflon rollers for sealing the entire assembly * Thread lock for fixing the threaded rod * 4 Rods with wing nuts * A dozen washers with an internal diameter of 6mm * 2 Nuts for M5 threaded rod '''To be recovered:''' * 1 Extinguisher of 7 or 9 litres * 1 Inner tube or other rubber to make a seal * Nails * 1 Wooden board * Flat iron 20 or 30 mm wide, about 60 cm * A torch (according to step 5)
    1 Wooden board * Flat iron 20 or 30 mm wide, about 60 cm * A torch (according to step 5))
  • Cultivo de la espirulina  + ('''Espirómetro''' * Tapa de plástico blanc'''Espirómetro''' * Tapa de plástico blanco * Tornillo * Varilla o regla de madera o plástico '''Medio de cultivo''' * Agua potable * Sal marina * Bicarbonato de sodio '''Alimentos minerales''' * Nitrato de potasio * Fosfato monoamónico * Sulfato de hierro * Sulfato de potasio (opcional) * Sulfato de magnesio (opcional) o * [https://spirulinasolutions.fr/boutique/nourrage-minerale-de-la-spiruline/ Alimentos prepesados para la venta N50 y N250] '''Alimentos naturales''' * Vinagre blanco * 100 g de clavos oxidados * 5 a 10 limones o ácido cítrico oxidados * 5 a 10 limones o ácido cítrico)
  • Domestic biodigestor  + ('''Matter circuit''' * 1 60 L can * 1 160'''Matter circuit''' * 1 60 L can * 1 160 mm plug * 1 160-100 mm reducer * 1 100-50 mm reducer * 1 meter PVC 50 mm tube * 4 45° 50 mm PVC MF bends * 2 50 mm separable connections * 2 50 mm through wall connectors * 2 MM 50 mm sleeves * 1 50 mm PVC plug * PVC glue * Etchant * Joint compound for plumbing '''Gas circuit''' * 2 planar nuts 1/2’ for through wall gas connector * 1 batch of planar joints * 1 threaded tube of 1/2’ * 1 brass MF 1/2’ bend * 1 connector FF 1/2’ gland nut * 1 gas valve 15x21 MM * 1 batch of hose clamps * 1 gas pin 1/2’ F * 5 m gas pipe * 1 water filter * 1 sulfur filter made of clay balls * 2 gas valves * 3 T gas pipes * 1 compressed air dismountable connector * 1 manometer * 1 flexible 150L water tank * 1 gas compressor * 1 gas cooker * 1 heat matas compressor * 1 gas cooker * 1 heat mat)
  • Bomba de ariete  + ('''No utilizar materias plásticas para la '''No utilizar materias plásticas para la bomba, que sean válvulas o obturadores, porque esos se desgastan muy rápidamente en funcionamiento.'''
    Eso es un ejemplo para el caso de una bomba dimensionada en 26/34, se tiene entonces que adaptar segun los resultados del dimensionamiento (Etapa 2
    '''Se tiene que comprar :''' *Válvula de 26/34 * 1 Codo de 26/34 * 3 Racores machos de 26/34 * 1 Tubo T de 26/34 * 1 colador de 26/34 o una válvula de retención interior plástica (véase fase 5) * 1 Válvula de retención de 26/34 con interior acero inoxidable / latón * 2 Válvulas de 20/27 o 1 válvula con una llave de vaciado * 1 Cruz de 20/27 * 1 Reducción de 26/34 hacia 20/27 * 1 o 2 Rollos de teflon para el sellado del ensamblaje * Liquido de fijación adhesiva para la varilla roscada * 4 Varillas con tuercas de mariposa * Unas diez arandelas de diámetro interior de 6mm * 2 Tuercas para varilla roscada M5 '''Se puede recuperar :''' * 1 Extintor 7 o 9 litros * 1 Cámara de aire o otra goma para hacer una junta * Varios clavos * 1 Tabla de madera * Hierro de 20 o 30mm de ancho, aproximadamente 60 cm * Un soplete (según fase 5)
    madera * Hierro de 20 o 30mm de ancho, aproximadamente 60 cm * Un soplete (según fase 5))
  • Spirulina farming  + ('''Spirumeter'''. * White plastic cap * Sc'''Spirumeter'''. * White plastic cap * Screws * Wooden or plastic rod or ruler '''Medium of culture'''. * Drinking water * Sea salt * Bicarbonate of soda '''Mineral Food''' * Potassium Nitrate * Monoammonium phosphate * Iron Sulfate * Potassium Sulfate (optional) * Magnesium sulfate (optional) or *[https://spirulinasolutions.fr/boutique/nourriture-minerale-de-la-spiruline/ Pre-weighed food for sale N50 and N250] '''Natural food''' * White vinegar * 100g rusty nails * 5 to 10 lemons or citric acidusty nails * 5 to 10 lemons or citric acid)
  • Micro-gasifier Cooking Stove  + ( * A large tin can (in terms of both heig * A large tin can (in terms of both height and width) (1): for the external chamber; * A tin can which is slightly shorter and thinner (2): for the combustion chamber; * A tin can with the same diameter as the combustion chamber (3): for the stand on which the pan sits. r (3): for the stand on which the pan sits. )
  • Desert fridge  + ( * - 1 clay pot of 50 x 46 cm, preferably * - 1 clay pot of 50 x 46 cm, preferably round ( 50cm diameter ) *1 clay pot of 30 x 40 cm, preferably round ( 30cm diameter ) *About 45 kg of fine sand * About 15 litres of drinking water* *1 breathable fabric or cover Adaptability : The dimensions of the two jars vary according to the quantity of food you wish to be able to preserve. Here we propose to build a Zeer Pot that can contain 12 kg of food. This will require an outer pot 50 cm in diameter and an inner pot 30 cm in diameter. The size can be adapted according to the needs provided that the proportions are respected. Health precautions : Attention : *Using contaminated water could contaminate the food deposited in the inner pot. The same will apply if the sand contains harmful elements such as hydrocarbons. ains harmful elements such as hydrocarbons. )
  • Bokashi “Kitchen compost”  + ( * 3 food grade buckets of 5L (gatherable * 3 food grade buckets of 5L (gatherable in restaurants) and a lid which enables a hermetical sealing. One is the compost box. One is the elevator . One is the receiver. * One tap adaptable for plastic buckets (with seal and tightening nut) * 1L of approx. 3mm diameter pumice * Organic waste * 1 Flask of EM A (available at [http://www.synbiovie.fr/ Bertrand Grevet, Synbiovie], French specialist) and/or 1 bag of his EM inseminated wheat bran. , Synbiovie], French specialist) and/or 1 bag of his EM inseminated wheat bran. )
  • Compost Bokashi de cuisine  + ( * 3 seaux alimentaires de 5L (récupérable * 3 seaux alimentaires de 5L (récupérables dans la restauration) et un couvercle permettant une fermeture étanche. 1 seau est le « bac compost ». 1 seau est « le réhausseur ». 1 seau est le « bac réceptacle ». * 1 robinet adaptable pour fûts plastiques (fourni avec joint et écrou de serrage). * 1L de pierres ponces ou graviers d’environ 3mm de diamètre. * Déchets organiques. * 1 flacon de micro-organismes efficaces activés (EM A) ([https://www.synbiovie.fr/boutique/maisons-et-jardins/test/em-fermente.html disponible par exemple ici], auprès de [http://www.synbiovie.fr/ Bertrand Grevet, Synbiovie], spécialiste français) et/ou 1 sachet de son de blé inséminé par des EM ([https://www.synbiovie.fr/boutique/maisons-et-jardins/test/demarreur-bokashi-bio.html disponible ici]) fr/boutique/maisons-et-jardins/test/demarreur-bokashi-bio.html disponible ici]) )
  • ЭМ-компост для кухни.  + ( * 3 seaux alimentaires de 5L (récupérable * 3 seaux alimentaires de 5L (récupérables dans la restauration) et un couvercle permettant une fermeture étanche. 1 seau est le « bac compost ». 1 seau est « le réhausseur ». 1 seau est le « bac réceptacle ». * 1 robinet adaptable pour fûts plastiques (fourni avec joint et écrou de serrage). * 1L de pierres ponces ou graviers d’environ 3mm de diamètre. * Déchets organiques. * 1 flacon de micro-organismes efficaces activés (EM A) ([https://www.synbiovie.fr/boutique/maisons-et-jardins/test/em-fermente.html disponible par exemple ici], auprès de [http://www.synbiovie.fr/ Bertrand Grevet, Synbiovie], spécialiste français) et/ou 1 sachet de son de blé inséminé par des EM ([https://www.synbiovie.fr/boutique/maisons-et-jardins/test/demarreur-bokashi-bio.html disponible ici]) fr/boutique/maisons-et-jardins/test/demarreur-bokashi-bio.html disponible ici]) )
  • Compost Bokashi de cuisine  + ( * 3 seaux alimentaires de 5L (récupérable * 3 seaux alimentaires de 5L (récupérables dans la restauration) et un couvercle permettant une fermeture étanche. 1 seau est le « bac compost ». 1 seau est « le réhausseur ». 1 seau est le « bac réceptacle ». * 1 robinet adaptable pour fûts plastiques (fourni avec joint et écrou de serrage). * 1L de pierres ponces ou graviers d’environ 3mm de diamètre. * Déchets organiques. * 1 flacon de micro-organismes efficaces activés (EM A) ([https://www.synbiovie.fr/boutique/maisons-et-jardins/test/em-fermente.html disponible par exemple ici], auprès de [http://www.synbiovie.fr/ Bertrand Grevet, Synbiovie], spécialiste français) et/ou 1 sachet de son de blé inséminé par des EM ([https://www.synbiovie.fr/boutique/maisons-et-jardins/test/demarreur-bokashi-bio.html disponible ici]) fr/boutique/maisons-et-jardins/test/demarreur-bokashi-bio.html disponible ici]) )
  • Recycling shower  + ( * A tank or a plastic container with a mi * A tank or a plastic container with a minimum capacity of 10L * A bunghole with overflow system and closing system * One 1/2" male gland * An instantaneous water-heater (Electrical with fuse or gas depending on context) * A self-priming pump type camping car, 12V, minimum 10L/min ([https://www.pompe-shurflo.com/series-5000-2086 example]) + 220V>12V power supply adapted (about 4A in 12V) * An accumulator adapted to the pump ([https://www.pompe-shurflo.com/accessoires/accumulateur-shurflo-181-101-au-meilleur-prix-2345.html?search_query=accumulator&results=1 example]) * A filtration station with associated cartridges ( 50 microns, 20 microns, activated carbon) ([https://www.leroymerlin.fr/v3/p/produits/station-de-filtration-d-eau-de-pluie-equation-e10775 example]) * Male to male adapters 3/4>1/2 for filter holders and possibly wall passageways * A 3-way valve * Flexible female / female 1/2 * Teflon coil * Optional: a shower tray * Optional: UV lamp on coil * Optional: a shower tray * Optional: UV lamp )
  • Plastic bottle cutter  + ( * A wood board ep. 10mm x L. 20cm x l. 15cm * A cutter blade * Two bolts L. 50mm x D. 5mm * 12 washers diameter 5mm )
  • Filtre à eau en céramique  + ( * Argile * Sciure de bois * Argent * Container en plastique doté d'un robinet )
  • Biofiltre pour bioponie  + ( * Bonbonne d'eau de 20L, usagée. * Grilla * Bonbonne d'eau de 20L, usagée. * Grillage fin ou moustiquaire. * Robinet de cuve. * Scotch. * Tissu opaque (facultatif). * Bulleur d'aquarium. * Tuyau adapté au bulleur (environ 1m) + jonctions. * Tube plastique de 8mm de diamètre et de la hauteur de la bonbonne. * couvercle bombé ou assiette usagée d'un diamètre un peu plus petit que la bonbonne. * Élastique permettant d'enserrer la bonbonne. * Roche volcanique ou bille d'argile et paillis sec (environ 5L). '''Remarque''': Cette liste de matériaux est à adapter en fonction des ressources disponibles à chacun. nction des ressources disponibles à chacun. )
  • Ceramic water filter  + (Materials Sawdust clay clean water: for mixing with the clay and the flow tests colloidal silver container with tap (ceramic, plastic, metal) plastic bags for the pressing process Fuel for the oven)
  • Bio-sand filter for drinking water  + ( * One meter of PVC pipe for drinking wate * One meter of PVC pipe for drinking water adduction, 100mm diameter. * One PVC plug, adapted to the pipe. * One cover * PVC glue. * Sand, if possible from crushed stones, diameter 0-1mm, in order to fill 60 of the pipe. * Gravel zone, 6-10 mm, in order to fill 10cm of the pipe. * Flexible plastic pipe intented for food. * 3 bends, adapted to the flexible pipe. * Silicone s, adapted to the flexible pipe. * Silicone )
  • Pasteurisation of Fruit and Vegetables  + ( * Surplus fruit and vegetables * Water )
  • Lacto-Fermented Preserves  + ( * Vegetables which are usually eaten raw * Table salt * Water )
  • Solar water heater  + ( * fridge doors of similar size (support) * fridge doors of similar size (support) * grilles on the back of fridge of similar size (sensor) * rot-resistant wooden battens (douglas, larch ...) * 16mm-diameter copper tubes (plumbing) * double-glazed window panel * wood screw or self-drilling screw * washers * polyurethane sealant * corks * brass solder rods and paint stripper (?? - should this be flux?) paint stripper (?? - should this be flux?) )
  • Pirólisis de plástico.  + ( *1 depósito grande de acero inoxidable co *1 depósito grande de acero inoxidable con tapa. *3 depósitos pequeños de acero inoxidable. *Tubo de cobre (6 mm de diámetro). *7 tubos pasa paredes de cobre (para la impermeabilidad de los empalmes) *Junta tórica (para la impermeabilidad de los depósitos) *residuos plásticos PP y/o PEAD/PEBD sitos) *residuos plásticos PP y/o PEAD/PEBD )
  • Plastic pyrolyzer  + ( *1 large stainless steel tank with lid *3 small stainless steel tanks *copper pipes (diameter 6mm) *7 copper uniseal joint (for watertightness of joints) *O-ring (for watertightness of tanks) *Plastic waste PP and/or HDPE/LDPE )
  • Micro gasifier stove  + ( *A large and tall can (1): this will be the outer chamber; *A can slightly narrower and slightly lower (2): this will be the combustion chamber; *A can of the same diameter as the combustion chamber (3): this will be the support for the pan. )
  • Bio-Coal  + ( *Agricultural residue : straws For 50 kilo of straws *100L water *5.5kg clay *15 kg crushed peanut shells )
  • Lâmpada solar de baterias de lítio restauradas  + ( *Baterias de laptop usadas (Li-ion 18650) *Baterias de laptop usadas (Li-ion 18650) *Suportes de bateria Li-ion 18650 *Painel solar 5V-6V/ 1-3W *Controlador de carga e descarga (ex: 4-8V 1A Módulo de Carregador de Carga Bateria Mini Li-ion USB Arduino [https://www.ebay.fr/itm/TP4056-Micro-USB-Module-de-Chargeur-5V-1A-Charge-Batterie-Lithium-Li-ion-Arduino-/253428065837 TP4056]) *Conversor de voltagem: [https://www.addicore.com/MT3608-Boost-Converter-p/ad300.htm DC/DC ''booster''] MT3608 (componente elétrico que transformará os 3,7V das baterias em 5V) *Lâmpada LED (ex : [https://www.ebay.com/b/3-W-LED-Light-Bulbs/20706/bn_7115563288 LED boutons 3W] máx) *Interruptor (para desligar o circuito e desligar a lâmpada) *Fita elétrica *Caixa (material de acordo com o modelo escolhido; veja etapas 7 ou 8) com o modelo escolhido; veja etapas 7 ou 8) )
  • Lampe solaire à batteries lithium récupérées  + ( *Batteries d’ordinateur portable usagées *Batteries d’ordinateur portable usagées (Li-ion 18650) *Supports de batteries Li-ion 18650 *Panneau solaire 5V-6V / 1-3W *Régulateur de charge et de décharge (ex : 4-8V 1A Module de Chargeur Charge Batterie Mini Li-ion USB Arduino [https://www.ebay.fr/itm/TP4056-Micro-USB-Module-de-Chargeur-5V-1A-Charge-Batterie-Lithium-Li-ion-Arduino-/253428065837 TP4056]) *Convertisseur de tension : [https://www.addicore.com/MT3608-Boost-Converter-p/ad300.htm DC/DC booste]r MT3608 (composant électrique qui va transformer le 3,7 V des batteries en 5V) *Lampe LED (ex : [https://www.ebay.com/b/3-W-LED-Light-Bulbs/20706/bn_7115563288 LED boutons 3W] max) *Interrupteur (pour couper le circuit et éteindre la lampe) *Scotch électrique *Boitier (matériel en fonction du modèle choisi, voir étapes 7 ou 8) ction du modèle choisi, voir étapes 7 ou 8) )
  • Lampe solaire à batteries lithium récupérées  + ( *Batteries d’ordinateur portable usagées *Batteries d’ordinateur portable usagées (Li-ion 18650) *Supports de batteries Li-ion 18650 *Panneau solaire 5V-6V / 1-3W *Régulateur de charge et de décharge (ex : 4-8V 1A Module de Chargeur Charge Batterie Mini Li-ion USB Arduino [https://www.ebay.fr/itm/TP4056-Micro-USB-Module-de-Chargeur-5V-1A-Charge-Batterie-Lithium-Li-ion-Arduino-/253428065837 TP4056]) *Convertisseur de tension : [https://www.addicore.com/MT3608-Boost-Converter-p/ad300.htm DC/DC booste]r MT3608 (composant électrique qui va transformer le 3,7 V des batteries en 5V) *Lampe LED (ex : [https://www.ebay.com/b/3-W-LED-Light-Bulbs/20706/bn_7115563288 LED boutons 3W] max) *Interrupteur (pour couper le circuit et éteindre la lampe) *Scotch électrique *Boitier (matériel en fonction du modèle choisi, voir étapes 7 ou 8) ction du modèle choisi, voir étapes 7 ou 8) )
  • Water Ceramic Filter  + ( *Clay, * Wood fines, *Silver, *Plastic container with a tap, )
  • Atelier Entrepreneuriat et démarche low-tech  + ( *Eléments de connaissance de la démarche *Eléments de connaissance de la démarche low-tech (un développement du triptyque Utile - Durable - Accessible) *Un modèle d'activité entrepreneuriale simple (ici, une boulangerie) *Un exemple concret et correspondant pouvant être observé (donc, une boulangerie) ouvant être observé (donc, une boulangerie) )
  • Cultivation of oyster mushrooms  + ( *Petri dish *Alcohol *Cardboard *Plastic bottles *Fresh mushrooms *Cotton *Substrate (wood chips, coffee grounds, sawdust, straw,...) )
  • Solar water heater  + ( *Pipe pvc 20mm *Elbow pipe pvc 20mm *T pvc 20mm *Adhesive tape for plumbing *Plastic bottle *Reservoir )
  • Cultivo de hongos ostra  + ( *Placas de Petri *Alcohol *Cartón *Botellas de plástico *hongos frescos* *Algodón *Sustrato (astillas de madera, posos de café, aserrín, paja,...) )
  • Multicuiseur solaire  +
  • Calentador de agua solar  + ( *Tubos de PVC 20mm *Codos de PVC 20mm *T pvc 20mm *Cinta para tuberías *Botellas de plástico * Un tanque )
  • Four solaire type tube transportable et à base de récup  + ( *Un tube de cuisson solaire, longueur 61. *Un tube de cuisson solaire, longueur 61.4 cm, diamètre extérieur 16 cm *Une plaque offset (à récupérer dans une imprimerie), la taille dans ce tuto est 1055 mm x 810 mm x 0.3 mm *Une plaque de contreplaqué ou autre bois un minimum durable, épaisseur 20 mm et d'au moins 80 cm x 40 cm *Une plaque de contreplaqué ou autre bois un minimum durable (OSB trouvé dans ce tuto), épaisseur 15 mm et d'au moins 70 cm x 80 cm *Traverse de palette, d'au moins 120 cm de long, 60 cm de large et 15 mm d'épaisseur (ici 120 cm x 72 mm x 17 mm) *Des vis à bois, diamètre 4 mm, longueur de 40 mm et D3L12 *Charnière piano largeur 32 mm et longueur minimum de 40 cm *Morceaux de chambre à air *Petit crochet métallique pour verrouiller la parabole en position ouverte Pour la cuillère en inox : *1 tube inox creux ⌀ 125 mm d'au moins 50 cm de longueur (type tuyau cheminée ou poêle) *2 bouchons inox ⌀125 mm (type bouchon de conduit de cheminée) *A défaut du tuyau + bouchons assez onéreux, on peut acheter (ou récupérer) une tole inox (alimentaire 304 ou 316) et faire soi-même la cuillère en courbant et soudant les bouchons. illère en courbant et soudant les bouchons. )
  • Solar lamp with reused lithium cells  + ( *Used laptop battery (Li-ion 18650) *Li- *Used laptop battery (Li-ion 18650) *Li-ion 18600 battery holders *Solar panel 5V-6V / 1-3W *Charge and discharge regulator (ex: 4-8V 1A Mini Li-ion USB Arduino Battery Charger [https://www.ebay.fr/itm/TP4056-Micro-USB-Module-de-Chargeur-5V-1A-Charge-Batterie-Lithium-Li-ion-Arduino-/253428065837 TP4056]) *DC/DC tension converter [https://www.addicore.com/MT3608-Boost-Converter-p/ad300.htm DC/DC booster] MT3608 (electrical component that will transform the 3.7 V of the batteries into 5 V) *High power LED Lamp (ex : [https://www.ebay.com/b/3-W-LED-Light-Bulbs/20706/bn_7115563288 LED boutons 3W] max) * Switch (to open the circuit and cut off the light) * Electric tape * Box cut off the light) * Electric tape * Box )
  • Farming of edible crickets  + ( *Waterproof box * Cartons: egg tray type *A plastic glass *2 containers (dish) * A tray *Fine mesh *Coconut fibre or ground dry matter *Food for crickets (here finely crushed wheat) )
  • Preservation module  + ( *Wood boards *Threaded steel rods *Nuts *Clay pots (2 different sizes) *Moskito net *Tarp *Sand )
  • The Norwegian Kettle (Hay Box)  + ( *Wooden planks from wine boxes, palettes, *Wooden planks from wine boxes, palettes, plywood off-cuts, etc. .... *Nails * 1 foil blanket * 1 duvet for insulation *Assembly feet and screws *A wooden box *A box * A cardboard box * A chest *An old polystyrene fish box * A basket * A bucket with a lid *A cooler *An insulated bag *A toy box *A washing tub *A trunk or a suitcase *A kitchen cupboard or draw * A hole in the ground *...... You get the idea Other options for the insulating material * Blanket *Duvet *Eiderdown *Sleeping bag *Wool *Textiles (old pullovers, anoraks, towels, curtains...); *Cushions *Jute sacs *Hemp *Sawdust *Bark *Cork *Polystyrene *Foil blanket (survival blanket) *Straw, hay... *Glass wool *Banana leaves *... raw, hay... *Glass wool *Banana leaves *... )
  • Ordinateur low-tech  + ( *[https://www.kubii.fr/ Raspberry Pi Zero *[https://www.kubii.fr/ Raspberry Pi Zero W] ou [https://www.kubii.fr/cartes-raspberry-pi/3455-raspberry-pi-zero-2-w-5056561800004.html Pi Zero 2 W] *[https://geni.us/rfl16gomicrosd MicroSD] 64GB. *Clavier USB ou sans fil de récupération *Souris USB ou sans fil de récupération *Un écran avec connexion HDMI de récupération *Câble HDMI *Adaptateur micro HDMI *Adaptateur micro USB *Une source d'alimentation 5V. *Une autre ordinateur avec une connexion internet pour la configuration. e connexion internet pour la configuration. )
  • Ordinateur low-tech  + ( *[https://www.kubii.fr/ Raspberry Pi Zero *[https://www.kubii.fr/ Raspberry Pi Zero W] ou [https://www.kubii.fr/cartes-raspberry-pi/3455-raspberry-pi-zero-2-w-5056561800004.html Pi Zero 2 W] *[https://geni.us/rfl16gomicrosd MicroSD] 64GB. *Clavier USB ou sans fil de récupération *Souris USB ou sans fil de récupération *Un écran avec connexion HDMI de récupération *Câble HDMI *Adaptateur micro HDMI *Adaptateur micro USB *Une source d'alimentation 5V. *Une autre ordinateur avec une connexion internet pour la configuration. e connexion internet pour la configuration. )
  • Low-tech Computer  + ( *[https://www.kubii.fr/ Raspberry Pi Zero *[https://www.kubii.fr/ Raspberry Pi Zero W] or [https://www.kubii.fr/cartes-raspberry-pi/3455-raspberry-pi-zero-2-w-5056561800004.html Pi Zero 2 W] * [https://geni.us/rfl16gomicrosd MicroSD] 64GB with Raspberry Pi OS (formerly Raspbian) burned on it (if you haven't prepared your SD card yet, you can go to [https://www.youtube.com/watch?v=ntaXWS8Lk34 the tutorial] and see details in step 1). *RecoveryUSB or wireless keyboard *Recovery USB or wireless mouse *Recovery monitor with HDMI connection *HDMI port *Micro HDMI adapter *Micro USB adapter port *Micro HDMI adapter *Micro USB adapter )