Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Recherche par propriété

Une liste de toutes les pages qui ont la propriété « Material » avec la valeur « *Pipe pvc 20mm *Elbow pipe pvc 20mm *T pvc 20mm *Adhesive tape for plumbing *Plastic bottle *Reservoir ». Puisqu’il n’y a que quelques résultats, les valeurs proches sont également affichées.

Affichage de 64 résultats à partir du n°1.

Voir (200 précédentes | 200 suivantes) (20 | 50 | 100 | 250 | 500).

    

Liste de résultats

    • Solar water heater  + ( *Pipe pvc 20mm *Elbow pipe pvc 20mm *T pvc 20mm *Adhesive tape for plumbing *Plastic bottle *Reservoir )
    • Semi-removable Mass Stove  + ('''Metalwork''' * Metal drum * Pipework (t … '''Metalwork''' * Metal drum * Pipework (tubes of differing diameters and T-tube) * Sewer grate '''Ironmongery:''' * Self-tapping screws, * Nuts and bolts '''Concrete: ''' * Tamper for packing down and applying the concrete, * Wire, * An old cloth to put in the drum to deaden the noise whilst you are working. '''Moulds:''' * Plastic packaging (cellophane), * Gaffer tape * Masking tape, * Corrugated cardboard, * Cardboard tubes of 80, 100, 130mm diameters respectivelys of 80, 100, 130mm diameters respectively)
    • Biofilter  + ( * 2 x 60L containers, e.g. plastic rubbi … * 2 x 60L containers, e.g. plastic rubbish bins (preferably made of solid, durable inert plastic) * 1 x lid * 1 x 15L (approx.) bowl of an equal diameter to the container (preferably made of solid durable inert plastic) * Water pump/airlift pump for pond or aquarium min. 300 L/hour to a height of 1m * 50cm hose pipe (with a diameter which will fit the pump output) * Expanded clay ball or porous volcanic rock (microporous materials are good for making a solid habitat for mirco-organisms): approximately 5L for the biofilter and 5L for the worm composter (bedding material for drainage) * Straw/dried vegetation (habitat made of materials high in cellulose for micro-organisms), approximately 5L for the biofilter and 5 L for the worm composter * Water: approximately 40L * Fungi (Trichoderma or Strepomyces) (GHE - BM or Subculture) or rotting organic matter, * A good selection of earthworms (min. 50) * A good selection of earthworms (min. 50) )
    • Tent heating stove  + ( * A part of a metal pipe at the scrapyard (diameter 20cm / Thickness 4mm) * Metal sheet 2mm thickness * Metal wire 2mm diameter you can weld * An hinge you can weld * Some scrap bars (minimum 6mm diameter) * Metal net )
    • Extinguisher  + ( * A plastic bottle of 2L * A fine plastic … * A plastic bottle of 2L * A fine plastic bag (for fruits for example) * A big nail (100 mm x 4 mm) * A BIC pencil spring * A cork * Paperclips or pieces of metal (drilling drops for example) * Masking tape (for painting) * 750 mL of alcohol vinegar * 750 mL of water * 105 g of baking soda * One tablespoon of dishwashing liquid soda * One tablespoon of dishwashing liquid )
    • Simple powerbank  + ( * A used laptop battery. * A "[http://www … * A used laptop battery. * A "[http://www.conrad.fr/ce/fr/product/651027/Support-pile-1x-18650-Keystone-1043-montage-THT-L-x-l-x-h-77-x-2065-x-1486-mm lithium-ion battery holder]", if possible with wire. * A [https://www.ebay.fr/itm/2in1-charge-discharge-board-module-f-18650-lithium-battery-DIY-Power-Phone-Bank-/252442590514 load / unload module]. * Tin wire. * A container for the components: here plastic tube / inner tube and bottle cap. e plastic tube / inner tube and bottle cap. )
    • Buried Aymarian Greenhouse  + ( * Adobe (using bricks of clay and straw) to build the walls, * Bricks to build columns to support the roof * Wood for the framework * Plastic (agroplastico) tarpaulin for the roof * mud and/or black nets to control the temperature )
    • Desert fridge - light version  + ( * Container of the desired size, either in plastic either in any other sand-proof material * Fabric with a thin stitch * Board, either in wood either any other material * Little plastic hose with a tap * Bottle of 5 or 6 litters * Sand )
    • Chauffe-eau solaire  + ( * Tuyaux pvc 20mm * Coudes pvc 20mm * T pvc 20mm * Ruban adhésif de plomberie * Bouteilles en plastique * Un réservoir )
    • Douche à recyclage  + ( * Un bac ou réservoir en plastique de con … * Un bac ou réservoir en plastique de contenance minimum de 10L * Une bonde avec système de trop plein et système de fermeture * Un passe-paroi mâle 1/2 * Un chauffe eau instantané (électrique avec fusible associé ou gaz selon contexte) * Une pompe auto-amorçante type camping car, 12V, minimum 10L/min ([https://www.pompe-shurflo.com/series-5000-2086 exemple]) + alimentation 220V>12V adapté (environ 4A en 12V) * Un accumulateur adapté à la pompe ([https://www.pompe-shurflo.com/accessoires/accumulateur-shurflo-181-101-au-meilleur-prix-2345.html?search_query=accumulateur&results=1 exemple]) * Une station de filtration avec cartouches associées ( 50 microns, 20 microns, charbon actif) ([https://www.leroymerlin.fr/v3/p/produits/station-de-filtration-d-eau-de-pluie-equation-e10775 exemple]) * Adaptateurs mâle/mâle 3/4>1/2 pour les portes filtres et éventuellement passe-paroi. * Une vanne 3 voies * Flexibles femelle/femelle 1/2 * Bobine téflon * Facultatif: un bac de douche * Facultatif: lampe UV * Facultatif: un bac de douche * Facultatif: lampe UV )
    • Solar desalinator  + ( * Wooden cleats (used in this tutorial: 44 * 22mm) * Small plastic tube diameter 5 or 6 mm * Two bottles of 5 or 6 liters * Strong and transparent plastic tarpaulin * Cotton fabric * Blanket * Wood screws * Inner tube )
    • Enhanced cooker  + ( * rocks * clay *salt *pig hair * donkey's dung which has previously fermented for 5 days in plastic tarpaulin * straw * water * sheet metal / iron armatures for the chimney )
    • Domestic mealworm farming  + (3 plastic bins flour, box of eggs live mealworms: - https://www.venteinsecte.fr/ - https://www.vente-insecte.com/produit/vers-de-farine/)
    • Mooli-Benne  + (Benne: * 1 Tôle Acier 1100/1700/3mm * 2 T … Benne: * 1 Tôle Acier 1100/1700/3mm * 2 Tôle Acier 450/1700/3mm * 2 Tôles Acier 600/1300/3mm * 16 Équerres Acier 30/30/3mm * 8 Tubes carré Acier 40mm * 4 Tubes carré Acier 50mm * 3 Fer U Acier 40/35/3mm * 2 Fer U Acier 40/30/3mm * 3 Fer U Acier 60/50/3mm * 4 Fers plats Acier 30/3mm * Fers à béton Ø10mm * 4 Tôles Acier 100/100/8mm * 1 Tôle Acier 100/100/6mm * 1 Tôle Acier 400/400/5mm * 4 Écrous M12 * 4 Boulons M12 x65mm Cadre: * 4 Équerres Acier 60/60/3mm * 2 Barres Acier Ø20mm * 2 Blocs Acier 35/35/80mm * 2 Tubes Acier Ø30mm * 4 Blocs Acier 150/60/10mm * 1 Barre Acier Ø60mm * 4 Goupilles Ø5x30mm * 4 Rondelles Ø50x3mm Charrette traction asine: * 10 Équerres Acier 50/50/3mm * 1 Fer carré Acier 35mm * 4 Tubes Acier Ø34mm * 4 Planches Bois 1700/300/50mm * Fers à béton Ø12mm * 2 Tôle Acier 300/300/2,5mm * 16 Écrous M12 * 16 Boulons M12 x65mm * 2 Roues 155 70 R13 75T MS Manivelles: * 1 Tube carré Acier 40mm * 1 Tube carré Acier 25mm * 2 Barres Acier Ø20mm Assemblage: * 10 Écrous M12 * 10 Boulons M12 x65mme: * 10 Écrous M12 * 10 Boulons M12 x65mm)
    • Pare soleil climatiseur  + (Couverture de survie (ou papier aluminium, pare soleil... à adapter selon les matériaux disponibles) Bande adhésive)
    • Worm Compost Bins  + (Large plastic or iron container with lid, … Large plastic or iron container with lid, 100 – 200 l Stainless ball or butterfly valvetap (1/2” inch or 3/4” inch) with hydraulic fittings Teflon Rocks, peppels, gravel, or expanded clay balls Sand. Not salty sand from sea! Good loamy soil to 30/40 cm height Cow or horses manure, several big handfuls, broken up Kitchen wastes, a bit. To be added to the system after 10 days Worms (100/ 200, depending on the dimension of the barrel). Better the red worm, they are more active and efficient, even if not local! Dry leaves or straw 2/3 ventilation filter in plastic of 10/12 cm diameter [ Mosquito net can be used instead of the ventilation filters.] silicon Bricks or other material 2 old big T-shit Non-woven blanketrial 2 old big T-shit Non-woven blanket)
    • Chauffage solaire version ardoise  + (Le tutoriel présenté ici fait 2,09m x 1,09 … Le tutoriel présenté ici fait 2,09m x 1,09m hors tout '''Capteur:''' * Chevron en douglas (Ici la section finale est de 95mm x 45mm) ** 2 de 2m10 ** 2 de 1m10 * 15 m de Liteaux en douglas (20mm x 53mm) * Plaque rigide (ici contreplaqué filmé, 10mm) * Isolant rigide (ici plaque de Steico, 22mm) * Cartouche de sika * Cartouche silicone * Colle PU pour collage bois extérieur * Colle à bois * Clous * Vis à bois, de 30mm à 150mm * Joint compribande * Huile de lin * Vernis bois * 15 m de Liteaux en douglas (30mm x 16 mm) * Adhésif aluminium * Vitre trempé ou plaque polycarbonate (1m x 2m) * Grille en métal déployé (300mm x 50mm) * 4 pattes à vis ([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de larmier aluminium de largeur 100mm ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adhésif double face * Isolant mince (ici isolant de parquet) * 30 à 35 ardoises 320mm x 220mm, épaisseur 3,5mm * 8 équerres renforcées, largeur mini 40mm * 1 tube diamètre 100mm longueur de la paroi de l'habitat, pvc/alu/inox pour l'entrée basse '''Système clapet:''' * [https://www.lextronic.fr/actionneurs-electriques/28536-verin-thermostatique.html 1 Vérin thermostatique Vernet EL 0769] * 100mm de tube laiton diamètre 4mm * [https://www.leroymerlin.fr/v3/p/produits/lot-de-4-ressorts-de-compression-acier-standers-diam-7-9-mm-l-70-x-ep-1-mm-e1401456374?queryredirect=a_fp_lot_de_4_ressorts_de_compression_acier__standers__diam_7_9_mm__l_70_x_ep_1_mm&numpage=1 1 ressort de compression longueur 70mm] * 1 rondelle * 1 petite vis * 2 rivets * 5 cm de fil de cuivre diamètre 2mm * 1 domino électricien diamètre 4mm * Materiel plomberie/gaz: ** 100mm de tube fileté laiton 15/21 ** 2 ecrous borgne laiton 15/21 ** 1 écrou débouchant laiton 15/21 ** 1 manchon cuivre diamètre 12mm ** 1 manchon cuivre diamètre 14mm ** 1 mamelon laiton 15/21 * [https://www.leroymerlin.fr/v3/p/produits/clapet-anti-retour-acier-equation-diam-100-mm-e42735?queryredirect=a_fp_clapet_anti_retour_acier_equation__diam_100_mm&numpage=1 1 clapet ventilation, ici diamètre 100mm] * [https://www.leroymerlin.fr/v3/p/produits/loqueteau-a-bille-laiton-hettich-l-16-x-l-11-mm-e22655 1 loqueteau à bille] * 1 tube alu ou inox à la longueur de la paroi du mur de l'habitat, diamètre du clapet '''facultatif:''' * Pare-pluie * Adhésif d'étanchéitéfacultatif:''' * Pare-pluie * Adhésif d'étanchéité)
    • Insulated mattress  + (Life jackets foam 2 survival blankets Plastic tarpaulin (could be replaced by a sewed tarpaulin made from inflatable dinghy's fabric ) Adhesive tape <br/>)
    • Aquecedor solar versão ardosia  + (O tutorial apresentado aqui tem 2,09m x 1 … O tutorial apresentado aqui tem 2,09m x 1,09m inteiro. Sensor * Caibro (Aqui a seção final é 95mm x 45mm) ** 2 de 2m10 ** 2 de 2m10 *15m de ripas(20mm x 53mm) * Placa rígida (aqui compensado revestido, 10mm) * Placa isolante (aqui placa de Steico/lã de rocha, 22mm) * Selante/cola Sika * Silicone * Cola de poliuretano monocomponente para montagem em madeira exterior. * Cola de madeira * Pregos * Parafusos para madeira de 30mm à 150mm * Fita asfáltica autoadesiva * Óleo de linhaça * Verniz para madeira * 15m de ripas (30mm x 16 mm) * Fita adesiva em alumínio * Placa de vidro temperado ou policarbonato (1m x 2m) * Grelha metálica expandida (300 mm x 50 mm) * 4 Parafusos Prisioneiro Rosca Dupla([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de cantoneira de alumínio de 100mm de largura ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adesivo dupla face * isolante fino (aqui isolante de parquet/taco) * 30 a 35 placas de ardosia 320 mm x 220 mm, espessura 3,5 mm * 8 esquadros reforçados, mini largura 40mm * 1 tubo do diâmetro 100mm de largura da parede da residência, de PVC / alumínio / aço inoxidável para baixo de entrada Sistema de válvula: * 1 Cilindro termostático Vernet EL 0769 * Tubo de 100mm de diâmetro latão 4mm * 1 mola de compressão comprimento 70mm * 1 arruela * 1 parafuso pequeno * 2 rebites * 5 cm de diâmetro de fio de cobre 2mm * 1 conector elétrico barra de diâmetro 4mm * Encanamento / equipamento de gás: ** 100mm de tubo de latão roscado 15/21 ** 2 Porcas Sextavada Calota 15/21 ** 1 porca latão 15/21 ** 1 mandril de cobre com diâmetro de 12mm ** 1 mandril de cobre com diâmetro de 14mm ** 1 conector em rosca em latão 15/21 * * 1 válvula de ventilação, aqui diâmetro 100 milímetros * 1 Trava de porta/fecho * 1 tubo de alumínio ou aço inoxidável ao longo da parede da parede da casa, diâmetro da válvula. '' 'Opcional' '' * Capa de chuva * Selante'' 'Opcional' '' * Capa de chuva * Selante)
    • Solar air heater  + (The tutorial presented here is 2.09m x 1.0 … The tutorial presented here is 2.09m x 1.09m overall Sensor: * Chevron Douglas (here the final section is 95mm x 45mm) ** 2 of 2m10 ** 2 of 1m10 * 15 m of douglas sheets (20mm x 53mm) * Rigid plate (here plywood filmed, 10mm) * Rigid insulation (here Steico plate, 22mm) * Sika cartridge * Silicone cartridge * PU glue for outdoor wood gluing * Wood glue * Nails * Wood screws, from 30mm to 150mm * Comprehensive seal * Linseed oil * Wood varnish * 15 m of douglas sheets (30mm x 16 mm) * Aluminum adhesive * Tempered glass or polycarbonate plate (1m x 2m) * Expanded metal grid (300mm x 50mm) * 4 screw legs (example) * 1m of aluminum drip 100mm width (example) * Double-sided adhesive * Thin insulation (here parquet insulation) * 30 to 35 slates 320mm x 220mm, thickness 3,5mm * 8 reinforced squares, mini width 40mm * 1 tube diameter 100mm length of the housing wall, pvc / aluminum / stainless steel for the low entrance Valve system: * 1 Thermostatic cylinder Vernet EL 0769 * 100mm of brass tube diameter 4mm * compression spring length 70mm * 1 washer * 1 small screw * 2 rivets * 5 cm of copper wire diameter 2mm * 1 domino electrician diameter 4mm * Plumbing / gas equipment: ** 100mm of threaded brass tube 15/21 ** 2 brass blind nuts 15/21 ** 1 brass through nut 15/21 ** 1 copper sleeve diameter 12mm ** 1 copper sleeve diameter 14mm ** 1 brass nipple 15/21 * 1 ventilation valve, here diameter 100mm * 1 ball catch * 1 aluminum or stainless steel tube along the wall of the house wall, diameter of the valve '''optional:''' * Rain barrier * Sealant '''optional:''' * Rain barrier * Sealant)
    • آبگرمکن خورشیدی  + (مصالح. لوله پی وی سی 20 میلیمتر. لوله پی وی سی لوله آرنج 20 میلیمتر. T pvc 20mm. نوار چسب برای لوله کشی. بطری پلاستیکی. مخزن .)
    • A wood-saving oven  + (• A metal canister of at least 30 cm in di … • A metal canister of at least 30 cm in diameter • Some bricks 4 cm thick maximum • A big bucket • A metal pipe 10 cm in diameter (the length depends on the height of the ceiling in the house and the chimney must exceed the roof by at least 30 cm). • Soil (clay soil if possible) • Cement • A grill whose width is slightly smaller than that of the canister • Wire mesh less than 0.5 cm canister • Wire mesh less than 0.5 cm)
    • Dry Toilets For Family  + ("Notes" 1) Every measure in this tutorial … "Notes" 1) Every measure in this tutorial are only for the stainless steel bucket below and for wood of a thickness of 1,2 in. It will be very simple to adapt the measure depending on the equipment of everyone. 2) It isn't recommended to use any other materials than stainless steel for the bucket. The other materials such as galvanized steel or plastic don't react well with urine through time. Furthermore, you have to make sure the bucket can support the weight of anybody. That's why stainless steel is recommended. * [http://ecotrone.fr/seaux-et-couvercles-inox_2_seau-15-l-sans-base__0901-15.html A stainless steel bucket]. * Classic toilet lid. * [https://lecopot.com/473-thickbox/seau-21l-en-plastique-alimentaire-toilette-seche.jpg A plastic bucket] * A door hinge 4 inches large, preferably stainless steel. * Wood boards/shavings, here 1,2 in thick. * Screws, preferably stainless steel. * Wood glue. * Polyurethane glue. * A lag-screw 4,8 in long. * Sawdust (can be collected at a carpenter). * Dry vegetable matters like straw, dead leaves, etc. * Container allowing to stock sawdust, approximately 20 L. (bucket, bag, etc) * Container allowing to collect the sawdust (small shovel, pot, tin can, etc) * Reclaimed wood or palettes (creation of the composting area).alettes (creation of the composting area).)
    • Ram pump  + ('''Do not use plastic material for the ram … '''Do not use plastic material for the ram, whether valves or flaps, as they will wear out very quickly during operation..'''
      This is an example for the case of a ram pump dimensioned in 26/34mm, but it has to be adapted according to the results of the dimensioning (Step 2
      '''To buy:''' * Valve of 26/34mm * 1 Elbow of 26/34 * 3 Male plumbing nipples in 26/34 * 1 Tee of 26/34 * 1 Strainer in 26/34 or a plastic check valve inside (see step 5) * 1 Check valve in 26/34 with stainless steel/brass interior * 2 Valves in 20/27 or 1 valve with drain valve * 1 Cross of 20/27 * 1 Reduction from 26/34 to 20/27 * 1 or 2 Teflon rollers for sealing the entire assembly * Thread lock for fixing the threaded rod * 4 Rods with wing nuts * A dozen washers with an internal diameter of 6mm * 2 Nuts for M5 threaded rod '''To be recovered:''' * 1 Extinguisher of 7 or 9 litres * 1 Inner tube or other rubber to make a seal * Nails * 1 Wooden board * Flat iron 20 or 30 mm wide, about 60 cm * A torch (according to step 5)      1 Wooden board * Flat iron 20 or 30 mm wide, about 60 cm * A torch (according to step 5))
    • Domestic biodigestor  + ('''Matter circuit''' * 1 60 L can * 1 160 … '''Matter circuit''' * 1 60 L can * 1 160 mm plug * 1 160-100 mm reducer * 1 100-50 mm reducer * 1 meter PVC 50 mm tube * 4 45° 50 mm PVC MF bends * 2 50 mm separable connections * 2 50 mm through wall connectors * 2 MM 50 mm sleeves * 1 50 mm PVC plug * PVC glue * Etchant * Joint compound for plumbing '''Gas circuit''' * 2 planar nuts 1/2’ for through wall gas connector * 1 batch of planar joints * 1 threaded tube of 1/2’ * 1 brass MF 1/2’ bend * 1 connector FF 1/2’ gland nut * 1 gas valve 15x21 MM * 1 batch of hose clamps * 1 gas pin 1/2’ F * 5 m gas pipe * 1 water filter * 1 sulfur filter made of clay balls * 2 gas valves * 3 T gas pipes * 1 compressed air dismountable connector * 1 manometer * 1 flexible 150L water tank * 1 gas compressor * 1 gas cooker * 1 heat matas compressor * 1 gas cooker * 1 heat mat)
    • Spirulina farming  + ('''Spirumeter'''. * White plastic cap * Sc … '''Spirumeter'''. * White plastic cap * Screws * Wooden or plastic rod or ruler '''Medium of culture'''. * Drinking water * Sea salt * Bicarbonate of soda '''Mineral Food''' * Potassium Nitrate * Monoammonium phosphate * Iron Sulfate * Potassium Sulfate (optional) * Magnesium sulfate (optional) or *[https://spirulinasolutions.fr/boutique/nourriture-minerale-de-la-spiruline/ Pre-weighed food for sale N50 and N250] '''Natural food''' * White vinegar * 100g rusty nails * 5 to 10 lemons or citric acidusty nails * 5 to 10 lemons or citric acid)
    • The organic filter  + ( * 2 vats of 60L each, such as black bins … * 2 vats of 60L each, such as black bins (strong inert plastic and preferably durable) * 1 lid * 1 basin of about 15L of the same diameter as the vats (strong inert plastic and preferably durable) * water pump or lift pump basin or aquarium min 300L / h at H = 1m * 50 cm garden hose (diameter adapted to the outlet of the pump) * ball of expanded clay or porous volcanic rock (microporosity will be the solid habitat of microorganisms): about 5L for the organic filter and 5L for the earthworm composter (draining litter) * straw / dry grass (degradable cellulosic habitat of microorganisms) about 5L for the organic filter and 5L for the earthworm composter * water: about 40L * fungi (Trichoderma or Streptomyces) (GHE - BM or Subculture) or decaying organic matter * earthworms (at least 50 earthworms of the correct variety) least 50 earthworms of the correct variety) )
    • Bokashi “Kitchen compost”  + ( * 3 food grade buckets of 5L (gatherable … * 3 food grade buckets of 5L (gatherable in restaurants) and a lid which enables a hermetical sealing. One is the compost box. One is the elevator . One is the receiver. * One tap adaptable for plastic buckets (with seal and tightening nut) * 1L of approx. 3mm diameter pumice * Organic waste * 1 Flask of EM A (available at [http://www.synbiovie.fr/ Bertrand Grevet, Synbiovie], French specialist) and/or 1 bag of his EM inseminated wheat bran. , Synbiovie], French specialist) and/or 1 bag of his EM inseminated wheat bran. )
    • Recycling shower  + ( * A tank or a plastic container with a mi … * A tank or a plastic container with a minimum capacity of 10L * A bunghole with overflow system and closing system * One 1/2" male gland * An instantaneous water-heater (Electrical with fuse or gas depending on context) * A self-priming pump type camping car, 12V, minimum 10L/min ([https://www.pompe-shurflo.com/series-5000-2086 example]) + 220V>12V power supply adapted (about 4A in 12V) * An accumulator adapted to the pump ([https://www.pompe-shurflo.com/accessoires/accumulateur-shurflo-181-101-au-meilleur-prix-2345.html?search_query=accumulator&results=1 example]) * A filtration station with associated cartridges ( 50 microns, 20 microns, activated carbon) ([https://www.leroymerlin.fr/v3/p/produits/station-de-filtration-d-eau-de-pluie-equation-e10775 example]) * Male to male adapters 3/4>1/2 for filter holders and possibly wall passageways * A 3-way valve * Flexible female / female 1/2 * Teflon coil * Optional: a shower tray * Optional: UV lamp on coil * Optional: a shower tray * Optional: UV lamp )
    • Ceramic water filter  + (Materials Sawdust clay clean water: for mixing with the clay and the flow tests colloidal silver container with tap (ceramic, plastic, metal) plastic bags for the pressing process Fuel for the oven)
    • Bio-sand filter for drinking water  + ( * One meter of PVC pipe for drinking wate … * One meter of PVC pipe for drinking water adduction, 100mm diameter. * One PVC plug, adapted to the pipe. * One cover * PVC glue. * Sand, if possible from crushed stones, diameter 0-1mm, in order to fill 60 of the pipe. * Gravel zone, 6-10 mm, in order to fill 10cm of the pipe. * Flexible plastic pipe intented for food. * 3 bends, adapted to the flexible pipe. * Silicone s, adapted to the flexible pipe. * Silicone )
    • Chauffe-eau solaire  + ( * Tuyaux pvc 20mm * Coudes pvc 20mm * T pvc 20mm * Ruban adhésif de plomberie * Bouteilles en plastique * Un réservoir )
    • Douche à recyclage  + ( * Un bac ou réservoir en plastique de con … * Un bac ou réservoir en plastique de contenance minimum de 10L * Une bonde avec système de trop plein et système de fermeture * Un passe-paroi mâle 1/2 * Un chauffe eau instantané (électrique avec fusible associé ou gaz selon contexte) * Une pompe auto-amorçante type camping car, 12V, minimum 10L/min ([https://www.pompe-shurflo.com/series-5000-2086 exemple]) + alimentation 220V>12V adapté (environ 4A en 12V) * Un accumulateur adapté à la pompe ([https://www.pompe-shurflo.com/accessoires/accumulateur-shurflo-181-101-au-meilleur-prix-2345.html?search_query=accumulateur&results=1 exemple]) * Une station de filtration avec cartouches associées ( 50 microns, 20 microns, charbon actif) ([https://www.leroymerlin.fr/v3/p/produits/station-de-filtration-d-eau-de-pluie-equation-e10775 exemple]) * Adaptateurs mâle/mâle 3/4>1/2 pour les portes filtres et éventuellement passe-paroi. * Une vanne 3 voies * Flexibles femelle/femelle 1/2 * Bobine téflon * Facultatif: un bac de douche * Facultatif: lampe UV * Facultatif: un bac de douche * Facultatif: lampe UV )
    • Solar water heater  + ( * fridge doors of similar size (support) … * fridge doors of similar size (support) * grilles on the back of fridge of similar size (sensor) * rot-resistant wooden battens (douglas, larch ...) * 16mm-diameter copper tubes (plumbing) * double-glazed window panel * wood screw or self-drilling screw * washers * polyurethane sealant * corks * brass solder rods and paint stripper (?? - should this be flux?) paint stripper (?? - should this be flux?) )
    • Plastic pyrolyzer  + ( *1 large stainless steel tank with lid *3 small stainless steel tanks *copper pipes (diameter 6mm) *7 copper uniseal joint (for watertightness of joints) *O-ring (for watertightness of tanks) *Plastic waste PP and/or HDPE/LDPE )
    • Water Ceramic Filter  + ( *Clay, * Wood fines, *Silver, *Plastic container with a tap, )
    • Cultivation of oyster mushrooms  + ( *Petri dish *Alcohol *Cardboard *Plastic bottles *Fresh mushrooms *Cotton *Substrate (wood chips, coffee grounds, sawdust, straw,...) )
    • Solar water heater  +
    • Calentador de agua solar  + ( *Tubos de PVC 20mm *Codos de PVC 20mm *T pvc 20mm *Cinta para tuberías *Botellas de plástico * Un tanque )
    • Solar lamp with reused lithium cells  + ( *Used laptop battery (Li-ion 18650) *Li- … *Used laptop battery (Li-ion 18650) *Li-ion 18600 battery holders *Solar panel 5V-6V / 1-3W *Charge and discharge regulator (ex: 4-8V 1A Mini Li-ion USB Arduino Battery Charger [https://www.ebay.fr/itm/TP4056-Micro-USB-Module-de-Chargeur-5V-1A-Charge-Batterie-Lithium-Li-ion-Arduino-/253428065837 TP4056]) *DC/DC tension converter [https://www.addicore.com/MT3608-Boost-Converter-p/ad300.htm DC/DC booster] MT3608 (electrical component that will transform the 3.7 V of the batteries into 5 V) *High power LED Lamp (ex : [https://www.ebay.com/b/3-W-LED-Light-Bulbs/20706/bn_7115563288 LED boutons 3W] max) * Switch (to open the circuit and cut off the light) * Electric tape * Box cut off the light) * Electric tape * Box )
    • Farming of edible crickets  + ( *Waterproof box * Cartons: egg tray type *A plastic glass *2 containers (dish) * A tray *Fine mesh *Coconut fibre or ground dry matter *Food for crickets (here finely crushed wheat) )
    • Poêle à pellets  + (- Fût : le traditionnel 220L - Réservoir … - Fût : le traditionnel 220L - Réservoir : Tube aluminié 153mmX1000mm à réduire+tampon de fermeture ou boite de conserve de collectivité - Tube d'arrivée d'air : tuyau de poêle de 180mm de diamètre - Interface entre ces 2 derniers : réducteur de tuyaux de ventilation 200/160mm([https://www.growland.fr/Picce-de-reduction-r-200-sur-160-mm LIEN]) - Tube de descente des fumées : 3 pots de peinture 310(D)X400mm(H) - Verre réfractaire : 320X320X4mm ([https://www.vitroglass.fr/accueil/11-verre-vitroceramique-4-mm.html?hauteur=320&largeur=320 LIEN]) - Tuyau d'évacuation : tube aluminié 125mmrgeur=320 LIEN]</u>) - Tuyau d'évacuation : tube aluminié 125mm)
    • Poêle à pellets  + (- Fût : le traditionnel 220L - Réservoir … - Fût : le traditionnel 220L - Réservoir : Tube aluminié 153mmX1000mm à réduire+tampon de fermeture ou boite de conserve de collectivité - Tube d'arrivée d'air : tuyau de poêle de 180mm de diamètre - Interface entre ces 2 derniers : réducteur de tuyaux de ventilation 200/160mm([https://www.growland.fr/Picce-de-reduction-r-200-sur-160-mm LIEN]) - Tube de descente des fumées : 3 pots de peinture 310(D)X400mm(H) - Verre réfractaire : 320X320X4mm ([https://www.vitroglass.fr/accueil/11-verre-vitroceramique-4-mm.html?hauteur=320&largeur=320 LIEN]) - Tuyau d'évacuation : tube aluminié 125mmrgeur=320 LIEN]</u>) - Tuyau d'évacuation : tube aluminié 125mm)
    • Wicking Bed  + (1 cuve plastique type MAUVILAC 2 tuyaux P … 1 cuve plastique type MAUVILAC 2 tuyaux PVC plomberie + 1 coude + 1 bouchon PVC: diamètre 40mm 8 tasseaux: 110cms x 4cms 40 planches de bois environ: H: 30cm / L: 10cm 32 vis perforantes métal 80 vis à bois 2 colliers de fixation Un bout de tuyau d'arrosage: longueur 10 cms, diamètre 10 à 20mm 4 parpaings 30 à 40 litres de scories 1 carré géotextile de la dimension du fond du bac + rebord 10cms: 130cm x 130cm 100 litres de terre environ.30cm x 130cm 100 litres de terre environ.)
    • Thrifty and stand-alone water point  + (1 wooden box 1 plastic bottle 1 wooden b … 1 wooden box 1 plastic bottle 1 wooden batten 1 small wooden plank (6x8 cm - 2,37x3,15 inch) 1 piece of iron wire 1 thin silicone tube (ex : baby nose cleaner, breast pump ...) 1 elastic 1 big nail (7 to 8 cm - 2,75 to 3,14 inch) A few screws 1 staple2,75 to 3,14 inch) A few screws 1 staple)
    • Batteries recovery  + (1- Computer battery 2 - Solar panel (e.g. … 1- Computer battery 2 - Solar panel (e.g. 5V-6V mini solar panel) 3 - Charge and discharge controller (e.g. 4-8V 1A Charging Module Mini Li-ion USB Arduino) 4 - Tension regulator : DC/DC booster MT3608 (electrical component which transforms the 3.7 V current from the batteries to 12 V) 5 - LED Lamp (e.g. 2 strips of 5 SMD 5050 LEDs) 6 - Light switch (to open the circuit and cut off the light) 7 - Box (cardboard, wood, 3D printed...) with 2 openings to fit the solar panel and the light diffuser (plan to also fit the light switch and USB output) 8 - Light diffuser (for diffusing light from LEDs) 9 - Tape (for diffusing light from LEDs) 9 - Tape)
    • Hydroponics  + (1. Crop gutters * Cleats (minimum width 1 … 1. Crop gutters * Cleats (minimum width 10cm) * Plastic sheeting * Staples * Clay beads
      Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots
      * Brackets * Wood screws * Young shoots and cuttings 2. Irrigation system * 1 Submersible pump (aquarium pump) * 5 m of thin plastic pipe (pump outlet) * 1 End cap with 4 outlets for fine pipe * 50 cm of wide plastic tube (Link between the filter and the bio-filter) * 1 Wide pipe end cap (to be fixed on the filter tank) * 1 Blower 3. Filter and bio-filter * 2 plastic bins of 60L * Large gravel * Sand * 10L Clay beads * 40L of water [[:Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation.]] 4. Control system * Socket outlet with programmable timer or Arduino      [[:Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation.]] 4. Control system * Socket outlet with programmable timer or Arduino)
    • Wtl  + (1x couvercle de la chasse d'eau modifier e … 1x couvercle de la chasse d'eau modifier en plastic recycler avec bague en polyester et un etonnoir en plastic récupérer. 2 à 8 x seaux (arrosoirs) en caoutchouc souple, marque Red Gorilla, chacun sa bague en '''S''' 1 x bac de 14l caoutchouc souple, marque Red Gorilla, la dedans en prendre notre douche. Après 2 minutes il est plein. Écope avec la grande Becprès 2 minutes il est plein. Écope avec la grande Bec)
    • Insulated Solar Electric Cooker (ISEC)  + (<br/> * High Temperature Wire: If y …
      * High Temperature Wire: If you have heavy gauge wire around you can use it, but for short runs in the amperage needed for most ISECS, 14 - 16 gauge is fine. * Metal Shears -- Brand name “aviation shears” are the best. Ideally, you want one straight cut * Nichrome Wire * Aramid or other non-flammable fabric * High Temperature RTV Silicon * Thermal Switches * Heavier Aluminum Foil * High Temperature Ceramic Beads * Silicon Tubing, High Temperature (for steam venting) * Inexpensive Wire Stripper/ Crimper/ Cutter * Duct Metal * Refractory Cement * Rockwool Batts * Aluminum Tape      fractory Cement * Rockwool Batts * Aluminum Tape)
    • Insulated Solar Electric Cooker (ISEC)  + (<br/> * High Temperature Wire: If y …
      * High Temperature Wire: If you have heavy gauge wire around you can use it, but for short runs in the amperage needed for most ISECS, 14 - 16 gauge is fine. * Metal Shears -- Brand name “aviation shears” are the best. Ideally, you want one straight cut * Nichrome Wire * Aramid or other non-flammable fabric * High Temperature RTV Silicon * Thermal Switches * Heavier Aluminum Foil * High Temperature Ceramic Beads * Silicon Tubing, High Temperature (for steam venting) * Inexpensive Wire Stripper/ Crimper/ Cutter * Duct Metal * Refractory Cement * Rockwool Batts * Aluminum Tape      fractory Cement * Rockwool Batts * Aluminum Tape)
    • Ηλιακός φούρνος  + (<div class="mw-translate-fuzzy"> Για …
      Για το κουτί: * 9 κομμάτια κόντρα πλακέ διάστασης 500x500mm και γύρω στα 10mm πάχος (όχι υπερβολικά χοντρό για να μη βαρύνει πολύ ο φούρνος) * Μονωτικό υλικό πάχους περίπου 40mm (4 κομμάτια των 500x500mm): φελιζόλ (μπορείτε να βρείτε σε ψαράδικα στο κλείσιμο της αγοράς ή σε μαγαζιά με οικοδομικά υλικά), φύλλο φελλού, βερμικουλίτης... * Ραβδί/Πηχάκι μήκους 4 μέτρων (στο ίδιο πάχος με το μονωτικό υλικό) * Αλουμινόχαρτο ή μαύρη ταινία (πιο ακριβή) * Βίδες 4x40 (περίπου 80) * Καρφιά 1,5x25mm (περίπου 10) Γυαλί, κάδρο και αυτιά: * Γυαλί διαστάσεων 410x470mm, όχι υπερβολικά χοντρό, 2 με 3mm (Μπορείτε να βρείτε από τα υπόλοιπα ξυλουργών) * Νοβοπάν (τσιπμπορντ/ μοριοσανίδα) στο ίδιο πάχος με το γυαλί, και ένα κομμάτι διάστασης 500x500mm κι ένα άλλο 500x550mm * Ξύλινες σανίδες (8 σανίδες περίπου 500x60mm και όχι υπερβολικά χοντρές (περίπου 20mm)) * 1 μέτρο λεπτού μεντεσέ ή 6 μεντεσέδες και τις αντίστοιχες βίδες με επίπεδη κεφαλή * 3 μέτρα κορδόνι (4mm διάμετρος) * Ταινία στεγανοποίησης
      *9 plaques de contre plaqué de 500x500 mm et d’épaisseur d’environ 10 mm (pas trop épais pour que la caisse ne soit pas trop lourde) Isolant d’environ 40 mm d’épaisseur (4 plaques de 500x500 mm) : polystyrènes, (récupérable chez le poissonnier / en fin de marché ou dans un magasin d'électroménager), liège en plaque, vermiculite … *4 mètres de baguettes de la même épaisseur que l’isolant *Papier aluminium ou adhésif miroir (plus chère) *Visserie 4x40 (environ 80) *Clous 1,5 x25 mm (environ 10) Vitre, cadre et oreilles : *Vitre de 410x470 mm, pas trop épaisse 2 à 3mm (récupérable dans la poubelle d’un menuisier pose de vitre) *Panneau aggloméré de la même épaisseur que la vitre, une de 500x500 mm et une autre de 500X550 mm *Palette / Planches de bois (8 planches d’environ 500x60 mm et pas trop épaisse (environ 20 mm) *1 mètre de charnière fine avec des vis à têtes plates OU 6 charnières. *3 mètres de cordelettes (4 mm de diamètre) joint      es. *3 mètres de cordelettes (4 mm de diamètre) joint)
    • fulu to etumbelo za moyi  + (<div class="mw-translate-fuzzy"> boi …
      boite: *9 plaques pe ya contre plaques ya 500x500mm et epaisseur ya 10mm(munene makasi te po caisse ezala kilo mingi te) isolant ya 40mm ya epaisseur (4 palques ya 500x500mm):polysterenes,(kozua yango na batu ba tekaka mpisi /to na ba magasin ya electromenager),liege ya plaque,vermiculite... *4 metres ya ba baguettes ya munene moko na isolant *papier aliminuim *visserie pona visse 4x40(environ 80) *sete 1,5x25mm (environ 10) vitre,ndaku to cadre pe ba toyi: *vitre ya 410x470mm,ya munene mingi te 2 a 3mm(nazua yango na fulu ya ba menusier ya ba vitre *panneau agglomere ya epaiseur moko na vitre ,moko ya 500x500mm pe mususu ya 500x500mm *palette/libaya (8 planches ya 500x60mm pe ya epaisseur mingi te (20mm) *1metre de charniere fine na ba vis na mutu ya plates ou 6 charniere *3 metres ya singa (4mm de diametre)ya joint
      *9 plaques de contre plaqué de 500x500 mm et d’épaisseur d’environ 10 mm (pas trop épais pour que la caisse ne soit pas trop lourde) Isolant d’environ 40 mm d’épaisseur (4 plaques de 500x500 mm) : polystyrènes, (récupérable chez le poissonnier / en fin de marché ou dans un magasin d'électroménager), liège en plaque, vermiculite … *4 mètres de baguettes de la même épaisseur que l’isolant *Papier aluminium ou adhésif miroir (plus chère) *Visserie 4x40 (environ 80) *Clous 1,5 x25 mm (environ 10) Vitre, cadre et oreilles : *Vitre de 410x470 mm, pas trop épaisse 2 à 3mm (récupérable dans la poubelle d’un menuisier pose de vitre) *Panneau aggloméré de la même épaisseur que la vitre, une de 500x500 mm et une autre de 500X550 mm *Palette / Planches de bois (8 planches d’environ 500x60 mm et pas trop épaisse (environ 20 mm) *1 mètre de charnière fine avec des vis à têtes plates OU 6 charnières. *3 mètres de cordelettes (4 mm de diamètre) joint      es. *3 mètres de cordelettes (4 mm de diamètre) joint)
    • Wind turbine  + (<u>Wind turbine</u> 1- A wood … Wind turbine 1- A wooden plank (minimum 10mm thick) 2- A piece of flat steel (minimum 2mm thick) 3- A stepper motor from a printer (with it's connectors) 4- A PVC tube (diameter between 55mm and 100mm; wall thickness minimum 3mm) 5- A bicycle inner tube 6- Some wood screws Electric circuit : 3- Stepper motor from a printer 8- A support made from plastic, to take the different system components (you could e.g. use a flat part of the printer housing) 9- Two rectifier diodes or bridge rectifiers 10- One capacitor, 1000µF 16V 11- A voltage stabilizer LM7805 for fixing the voltage at 5V or LM7812 for fixing the voltage at 12V 11'- Instead of the tension stabilizer you could also use a voltage amplifier or a DC/DC booster or even more advance it by supplying the USB connector with a voltage between 0,9 and 5 Volts. 12- An USB connector 13- solder 14- wire Also take a look at global 3D model of this wind turbine after reading. [https://cad.onshape.com/documents/e2f661f83cf12a82e9ecb8f5/w/cd00be7c7cf2b2a8cc586f3c/e/b08da6447db094a9319da5fe]a82e9ecb8f5/w/cd00be7c7cf2b2a8cc586f3c/e/b08da6447db094a9319da5fe])
    • Mooli-Benne  + (Benne: * 1 Tôle Acier 1100/1700/3mm * 2 T … Benne: * 1 Tôle Acier 1100/1700/3mm * 2 Tôle Acier 450/1700/3mm * 2 Tôles Acier 600/1300/3mm * 16 Équerres Acier 30/30/3mm * 8 Tubes carré Acier 40mm * 4 Tubes carré Acier 50mm * 3 Fer U Acier 40/35/3mm * 2 Fer U Acier 40/30/3mm * 3 Fer U Acier 60/50/3mm * 4 Fers plats Acier 30/3mm * Fers à béton Ø10mm * 4 Tôles Acier 100/100/8mm * 1 Tôle Acier 100/100/6mm * 1 Tôle Acier 400/400/5mm * 4 Écrous M12 * 4 Boulons M12 x65mm Cadre: * 4 Équerres Acier 60/60/3mm * 2 Barres Acier Ø20mm * 2 Blocs Acier 35/35/80mm * 2 Tubes Acier Ø30mm * 4 Blocs Acier 150/60/10mm * 1 Barre Acier Ø60mm * 4 Goupilles Ø5x30mm * 4 Rondelles Ø50x3mm Charrette traction asine: * 10 Équerres Acier 50/50/3mm * 1 Fer carré Acier 35mm * 4 Tubes Acier Ø34mm * 4 Planches Bois 1700/300/50mm * Fers à béton Ø12mm * 2 Tôle Acier 300/300/2,5mm * 16 Écrous M12 * 16 Boulons M12 x65mm * 2 Roues 155 70 R13 75T MS Manivelles: * 1 Tube carré Acier 40mm * 1 Tube carré Acier 25mm * 2 Barres Acier Ø20mm Assemblage: * 10 Écrous M12 * 10 Boulons M12 x65mme: * 10 Écrous M12 * 10 Boulons M12 x65mm)
    • Pare soleil climatiseur  + (Couverture de survie (ou papier aluminium, pare soleil... à adapter selon les matériaux disponibles) Bande adhésive)
    • Forno Solare (modello a scatola)  + (La scatola: *9 tessere di compensato di 5 … La scatola: *9 tessere di compensato di 500x500 mm e di circa 10mm di spessore (non troppo spesse affinché la scatola non diventi troppo pesante). *Materiale isolante di circa 40 mm di spessore (4 tessere da 500x500 mm): polistirene (recuperabile dal pescivendolo al mercato o da un comune negozio di elettrodomestici, placche di sughero, vermicolite..) * 4 metri di aste dello stesso spessore del materiale isolante * Carta d'alluminio o adesivo a specchio (piü costoso) * Viti 4x40 (circa 80) Vetro, telaio e orecchie : * Chiodi da 410x470 mm, non troppo spessi, da 2 a 3 mm (recuperabili dalla spazzatura di un carpentiere). * Un pannello agglomerato dello stesso spessore del vetro, uno di 500x500 mm e un'altro di 500x500 mm *tavole di legno (8 tavole da circa 500x60 mm e non troppo spesse, circa 20mm) * 1 metro di cerniera fina con delle viti a capocchia piatta oppure 6 cerniere. * 3 metri di corda di 4 mm di diametro sigilloetri di corda di 4 mm di diametro sigillo)
    • Worm Compost Bins  + (Large plastic or iron container with lid, … Large plastic or iron container with lid, 100 – 200 l Stainless ball or butterfly valvetap (1/2” inch or 3/4” inch) with hydraulic fittings Teflon Rocks, peppels, gravel, or expanded clay balls Sand. Not salty sand from sea! Good loamy soil to 30/40 cm height Cow or horses manure, several big handfuls, broken up Kitchen wastes, a bit. To be added to the system after 10 days Worms (100/ 200, depending on the dimension of the barrel). Better the red worm, they are more active and efficient, even if not local! Dry leaves or straw 2/3 ventilation filter in plastic of 10/12 cm diameter [ Mosquito net can be used instead of the ventilation filters.] silicon Bricks or other material 2 old big T-shit Non-woven blanketrial 2 old big T-shit Non-woven blanket)
    • Chauffage solaire version ardoise  + (Le tutoriel présenté ici fait 2,09m x 1,09 … Le tutoriel présenté ici fait 2,09m x 1,09m hors tout '''Capteur:''' * Chevron en douglas (Ici la section finale est de 95mm x 45mm) ** 2 de 2m10 ** 2 de 1m10 * 15 m de Liteaux en douglas (20mm x 53mm) * Plaque rigide (ici contreplaqué filmé, 10mm) * Isolant rigide (ici plaque de Steico, 22mm) * Cartouche de sika * Cartouche silicone * Colle PU pour collage bois extérieur * Colle à bois * Clous * Vis à bois, de 30mm à 150mm * Joint compribande * Huile de lin * Vernis bois * 15 m de Liteaux en douglas (30mm x 16 mm) * Adhésif aluminium * Vitre trempé ou plaque polycarbonate (1m x 2m) * Grille en métal déployé (300mm x 50mm) * 4 pattes à vis ([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de larmier aluminium de largeur 100mm ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adhésif double face * Isolant mince (ici isolant de parquet) * 30 à 35 ardoises 320mm x 220mm, épaisseur 3,5mm * 8 équerres renforcées, largeur mini 40mm * 1 tube diamètre 100mm longueur de la paroi de l'habitat, pvc/alu/inox pour l'entrée basse '''Système clapet:''' * [https://www.lextronic.fr/actionneurs-electriques/28536-verin-thermostatique.html 1 Vérin thermostatique Vernet EL 0769] * 100mm de tube laiton diamètre 4mm * [https://www.leroymerlin.fr/v3/p/produits/lot-de-4-ressorts-de-compression-acier-standers-diam-7-9-mm-l-70-x-ep-1-mm-e1401456374?queryredirect=a_fp_lot_de_4_ressorts_de_compression_acier__standers__diam_7_9_mm__l_70_x_ep_1_mm&numpage=1 1 ressort de compression longueur 70mm] * 1 rondelle * 1 petite vis * 2 rivets * 5 cm de fil de cuivre diamètre 2mm * 1 domino électricien diamètre 4mm * Materiel plomberie/gaz: ** 100mm de tube fileté laiton 15/21 ** 2 ecrous borgne laiton 15/21 ** 1 écrou débouchant laiton 15/21 ** 1 manchon cuivre diamètre 12mm ** 1 manchon cuivre diamètre 14mm ** 1 mamelon laiton 15/21 * [https://www.leroymerlin.fr/v3/p/produits/clapet-anti-retour-acier-equation-diam-100-mm-e42735?queryredirect=a_fp_clapet_anti_retour_acier_equation__diam_100_mm&numpage=1 1 clapet ventilation, ici diamètre 100mm] * [https://www.leroymerlin.fr/v3/p/produits/loqueteau-a-bille-laiton-hettich-l-16-x-l-11-mm-e22655 1 loqueteau à bille] * 1 tube alu ou inox à la longueur de la paroi du mur de l'habitat, diamètre du clapet '''facultatif:''' * Pare-pluie * Adhésif d'étanchéitéfacultatif:''' * Pare-pluie * Adhésif d'étanchéité)
    • Mini galerie pour fixer un panneau solaire rigide sur le toit d'un van  + (Liste des matériaux : - 2 profil plat alu … Liste des matériaux : - 2 profil plat alu de 1,5m ou 2m (cela dépend de la largeur de votre van) de largueur 2,5 cm et d’épaisseur 2 mm - 1 profil alu en L - des vis à tôle autoportantes - des boulons, rondelles et écrous - pâte bloc écrou - embases auto-adhésifs 20x20mm pour pour colliers de serrage souple - colliers de serrage souplerrage souple - colliers de serrage souple)
    • Solar Oven (box-type oven)  + (The box: * 9 plywood panels of 500x500mm … The box: * 9 plywood panels of 500x500mm and around 10mm of thickness (not too thick to not overweight the box) * Isolator of around 40mm of thickness (4 panels of 500x500mm): polystyrene (available at the fishmonger/ at the and of the market or in electric shop), cork panel, vermiculite... * 4 meters of stick (same thickness of the isolator) * Aluminium paper or black tape (more expensive) * Casing assembly 4x40 (around 80) * Nails 1,5x25mm (around 10) Glass, cadre and ears: * Glass of 410x470mm, not too thick, 2 to 3mm (available in carpenters' trashes) * Chipboard panel of the same thickness of the winder, one of 500x500mm and another one of 500x550mm * Wood pallet or wooden board (8 boards of around 500x60mm and not to thick (around 20mm) * 1 meter of thin hinge with flat head screws OR 6 hinges * 3 meters of string (4mm of diameter) * Sealmeters of string (4mm of diameter) * Seal)
    • Black Soldier Fly breeding  + (The materials used will depend on the supp … The materials used will depend on the support used to build the living space of your larvae. This can be done in a wooden box, a drum cut in half, a large plastic box...
      For the boat, we chose a wooden box because we had recovery boards
      For an order of size, our box will allow to treat waste (food and from dry toilets) produced by 3 persons. For the box (120/65/30cm):
      *120/65cm x2 wood boards *120/30cm x2 wood boards *65/30cm x2 wood boards *Iron angles *Hinges *Screw *Paint and varnish *Plastic tray of 100/60/15cm *Plank and pieces of wood to make the ramp *Inner tube *Staples *Plastic box to collect larvae
      For the aviary (80/50/45cm): * Wood bars of 80/5/2cm x4 * Wood bars of 41/5/2cm x2 * Wood bars of 40/5/2cm x2 *50/45cm plywood board (for the bottom) *Hinges *Screw *Angles *Mosquito net *50/10cm board (for opening) For pupae and egg laying: *Cardboard or wooden plates separated by pins *A box to put some waste *A box to put the pupae *Dry substrate (coconut fiber...) *A box for the hydration of flies
      Don't forget to protect the living space from the water. The eggs will burst with water!
      b-o"></i></div> <div class="icon-instructions-text">Don't forget to protect the living space from the water. The eggs will burst with water!</div> </div>)
    • Pare soleil  + (couverture(s) de survie, bande adhésive)
    • Bait for Melipona bees  + (• Two 2-3 litre plastic bottles • Newspaper • Black plastic bags • Adhesive tape • Iron wire • 90° Alcohol • Bee propolis from the target species)
    • 太阳能烤炉 (箱式烤炉)  + (箱体： * 胶合板，9块，尺寸为500x500mm，厚度约为10mm（过厚的板材这 … 箱体： * 胶合板，9块，尺寸为500x500mm，厚度约为10mm（过厚的板材这样会使箱体过重） 绝缘隔热层，4块，尺寸为500x500mm，厚度约为40mm，常见的绝缘隔热层为：聚苯乙烯（可通过在鱼贩、市场、电商处购买获得）、软木板、蛭石等 * 木条，长度为4m，厚度与绝缘隔热层一致 *锡纸或黑色胶带（价格较高） * 螺丝钉，尺寸为4x40mm，约80个 * 钉子，约10个，尺寸为1.5 x25mm 玻璃、框架及聚热装置： *玻璃，尺寸为410x470mm，厚度为2～3mm，不能过厚（可以用木匠的边角料） * 刨花板，2块，尺寸分别为500x500mm和500x550mm，厚度和绕线机一致 * 木板，8块，尺寸约为500x60mm，厚度约为20mm，不能过厚 * 有平头螺丝钉的薄铰链，长度为1m（或者铰链，6个） * 细绳，长度为3m，直径为4mm 密封条的薄铰链，长度为1m（或者铰链，6个） * 细绳，长度为3m，直径为4mm 密封条)
    Récupérée de « https://wiki.lowtechlab.org/wiki/Spécial:Recherche_par_propriété/:Material/*Pipe-20pvc-2020mm-0A*Elbow-20pipe-20pvc-2020mm-0A*T-20pvc-2020mm-0A*Adhesive-20tape-20for-20plumbing-0A*Plastic-20bottle-0A*Reservoir »
    © 2017 - 2024 Dokit, SAS.