Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Liste de résultats

• The organic filter  + ( * 2 vats of 60L each, such as black bins … * 2 vats of 60L each, such as black bins (strong inert plastic and preferably durable) * 1 lid * 1 basin of about 15L of the same diameter as the vats (strong inert plastic and preferably durable) * water pump or lift pump basin or aquarium min 300L / h at H = 1m * 50 cm garden hose (diameter adapted to the outlet of the pump) * ball of expanded clay or porous volcanic rock (microporosity will be the solid habitat of microorganisms): about 5L for the organic filter and 5L for the earthworm composter (draining litter) * straw / dry grass (degradable cellulosic habitat of microorganisms) about 5L for the organic filter and 5L for the earthworm composter * water: about 40L * fungi (Trichoderma or Streptomyces) (GHE - BM or Subculture) or decaying organic matter * earthworms (at least 50 earthworms of the correct variety) least 50 earthworms of the correct variety) )

• 200W Wind Turbine  + ('''List of materials required for the prop … '''List of materials required for the propeller, refer to the chapters for details''' * Scraps of plywood * Plank section minimum 95mm x 35mm, length 1m80. (red cedar or douglas or larch or spruce ) *Plywood 9mm * Some screws of diameter 5mm, length 30mm. '''List of materials required for the generator, refer to the chapters for details''' * Metal disc of thickness 8mm and diameter 140mm. * Rear wheel hub of golf, corsa, polo or Ibiza. * 25cm of threaded rods with diameter 12mm. * Pack of nuts of 12mm. * 30cm threaded rods of diameter 10mm, 4 nuts of 10mm. * Scraps of metal tube and angle. * 4 nails of diameter 6mm. * 1.5kg of enamelled copper wire, diameter 1.4mm. * Electrical scotch. * Heat-shrink tubes * Plywood 9mm et 16mm. * Glass fiber cloth (approximately 300g/m²) * Polyester resin, associated catalyst * Talc. * Mould release wax * 8 neodymium magnets. * Steel disc of diameter 230mm, thickness 6mm. * Bolts 12mm. '''List of materials required for the steel structure, refer to the chapters for details''' * Angle of 206mm (50x50x6mm). * Tube of outer diameter 42.2mm, length 100mm. * Tube of outer diameter 33.4mm, length 150mm. * Tube of outer diameter 42.2mm, length 130mm. * Iron plate 50 x 50 x 6mm. * Tube of outer diameter 33.4mm, length 700mm. * Angle 30 x 30 x 5, length 250mm. * 60 cm of threaded rods with diameter 12mm.60 cm of threaded rods with diameter 12mm.)
• Semi-removable Mass Stove  + ('''Metalwork''' * Metal drum * Pipework (t … '''Metalwork''' * Metal drum * Pipework (tubes of differing diameters and T-tube) * Sewer grate '''Ironmongery:''' * Self-tapping screws, * Nuts and bolts '''Concrete: ''' * Tamper for packing down and applying the concrete, * Wire, * An old cloth to put in the drum to deaden the noise whilst you are working. '''Moulds:''' * Plastic packaging (cellophane), * Gaffer tape * Masking tape, * Corrugated cardboard, * Cardboard tubes of 80, 100, 130mm diameters respectivelys of 80, 100, 130mm diameters respectively)
• Manual Pump (vertical)  + ( * The parts for the pump mentioned here … * The parts for the pump mentioned here are all made of PVC: * 3 adapters 50mm-25mm * 2 couplings 50mm diameter * 1 tee 50mm-25mm * 1 or 2 elbows 25mm (in accordance with requirements for water outlet) * 1 - 2 metres of 25mm diameter tubing (in accordance with requirements for water outlet) * 1 - 2 metres tubing 50mm diameter * 2 (glass) marbles with a diameter greater than 25mm, * 2 screws 50mm long (minimum) For the piston: * 1 - 2 metres of tubing 40mm, * 1 Tee XXmm-40mm * 1 x tube cap 40mm (or preferably slightly larger) * acetone (or similar solvent) tly larger) * acetone (or similar solvent) )
• Tent heating stove  + ( * A part of a metal pipe at the scrapyard (diameter 20cm / Thickness 4mm) * Metal sheet 2mm thickness * Metal wire 2mm diameter you can weld * An hinge you can weld * Some scrap bars (minimum 6mm diameter) * Metal net )
• Extinguisher  + ( * A plastic bottle of 2L * A fine plastic … * A plastic bottle of 2L * A fine plastic bag (for fruits for example) * A big nail (100 mm x 4 mm) * A BIC pencil spring * A cork * Paperclips or pieces of metal (drilling drops for example) * Masking tape (for painting) * 750 mL of alcohol vinegar * 750 mL of water * 105 g of baking soda * One tablespoon of dishwashing liquid soda * One tablespoon of dishwashing liquid )
• Simple powerbank  + ( * A used laptop battery. * A "[http://www … * A used laptop battery. * A "[http://www.conrad.fr/ce/fr/product/651027/Support-pile-1x-18650-Keystone-1043-montage-THT-L-x-l-x-h-77-x-2065-x-1486-mm lithium-ion battery holder]", if possible with wire. * A [https://www.ebay.fr/itm/2in1-charge-discharge-board-module-f-18650-lithium-battery-DIY-Power-Phone-Bank-/252442590514 load / unload module]. * Tin wire. * A container for the components: here plastic tube / inner tube and bottle cap. e plastic tube / inner tube and bottle cap. )
• Buried Aymarian Greenhouse  + ( * Adobe (using bricks of clay and straw) to build the walls, * Bricks to build columns to support the roof * Wood for the framework * Plastic (agroplastico) tarpaulin for the roof * mud and/or black nets to control the temperature )
• Biofiltre pour bioponie  + ( * Bonbonne d'eau de 20L, usagée. * Grilla … * Bonbonne d'eau de 20L, usagée. * Grillage fin ou moustiquaire. * Robinet de cuve. * Scotch. * Tissu opaque (facultatif). * Bulleur d'aquarium. * Tuyau adapté au bulleur (environ 1m) + jonctions. * Tube plastique de 8mm de diamètre et de la hauteur de la bonbonne. * couvercle bombé ou assiette usagée d'un diamètre un peu plus petit que la bonbonne. * Élastique permettant d'enserrer la bonbonne. * Roche volcanique ou bille d'argile et paillis sec (environ 5L). '''Remarque''': Cette liste de matériaux est à adapter en fonction des ressources disponibles à chacun. nction des ressources disponibles à chacun. )
• Desert fridge - light version  + ( * Container of the desired size, either in plastic either in any other sand-proof material * Fabric with a thin stitch * Board, either in wood either any other material * Little plastic hose with a tap * Bottle of 5 or 6 litters * Sand )
• Solar desalinator  + ( * Wooden cleats (used in this tutorial: 44 * 22mm) * Small plastic tube diameter 5 or 6 mm * Two bottles of 5 or 6 liters * Strong and transparent plastic tarpaulin * Cotton fabric * Blanket * Wood screws * Inner tube )
• Enhanced cooker  + ( * rocks * clay *salt *pig hair * donkey's dung which has previously fermented for 5 days in plastic tarpaulin * straw * water * sheet metal / iron armatures for the chimney )
• Domestic mealworm farming  + (3 plastic bins flour, box of eggs live mealworms: - https://www.venteinsecte.fr/ - https://www.vente-insecte.com/produit/vers-de-farine/)
• Manual pump (vertical)  + (All these pieces are here in PVC for the … All these pieces are here in PVC for the pump : - 3 adapter 50mm-25mm - 2 couplings 50mm - 1 T 50mm-25mm - 1 or 2 25mm elbows (depending on water outlet requirements) - between 1 and 2 metres of 25mm tube (depending on water outlet requirements) - between 1 and 2 meters of 50mm tube - two balls over 25mm in diameter (glass balls) - 2 screws at least 50 mm long for the piston : - between 1 and 2 meters of 40mm tube - 1 T XXmm-40mm - 1 tube cap of 40mm, if possible a little wider paint stripper (acetone type)ittle wider paint stripper (acetone type))
• Solar oven - inner tube  + (Car inner tube Flat piece of wood Black pot or pan A pain of glass Emergency blanket)
• Worm Compost Bins  + (Large plastic or iron container with lid, … Large plastic or iron container with lid, 100 – 200 l Stainless ball or butterfly valvetap (1/2” inch or 3/4” inch) with hydraulic fittings Teflon Rocks, peppels, gravel, or expanded clay balls Sand. Not salty sand from sea! Good loamy soil to 30/40 cm height Cow or horses manure, several big handfuls, broken up Kitchen wastes, a bit. To be added to the system after 10 days Worms (100/ 200, depending on the dimension of the barrel). Better the red worm, they are more active and efficient, even if not local! Dry leaves or straw 2/3 ventilation filter in plastic of 10/12 cm diameter [ Mosquito net can be used instead of the ventilation filters.] silicon Bricks or other material 2 old big T-shit Non-woven blanketrial 2 old big T-shit Non-woven blanket)
• Chauffage solaire version ardoise  + (Le tutoriel présenté ici fait 2,09m x 1,09 … Le tutoriel présenté ici fait 2,09m x 1,09m hors tout '''Capteur:''' * Chevron en douglas (Ici la section finale est de 95mm x 45mm) ** 2 de 2m10 ** 2 de 1m10 * 15 m de Liteaux en douglas (20mm x 53mm) * Plaque rigide (ici contreplaqué filmé, 10mm) * Isolant rigide (ici plaque de Steico, 22mm) * Cartouche de sika * Cartouche silicone * Colle PU pour collage bois extérieur * Colle à bois * Clous * Vis à bois, de 30mm à 150mm * Joint compribande * Huile de lin * Vernis bois * 15 m de Liteaux en douglas (30mm x 16 mm) * Adhésif aluminium * Vitre trempé ou plaque polycarbonate (1m x 2m) * Grille en métal déployé (300mm x 50mm) * 4 pattes à vis ([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de larmier aluminium de largeur 100mm ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adhésif double face * Isolant mince (ici isolant de parquet) * 30 à 35 ardoises 320mm x 220mm, épaisseur 3,5mm * 8 équerres renforcées, largeur mini 40mm * 1 tube diamètre 100mm longueur de la paroi de l'habitat, pvc/alu/inox pour l'entrée basse '''Système clapet:''' * [https://www.lextronic.fr/actionneurs-electriques/28536-verin-thermostatique.html 1 Vérin thermostatique Vernet EL 0769] * 100mm de tube laiton diamètre 4mm * [https://www.leroymerlin.fr/v3/p/produits/lot-de-4-ressorts-de-compression-acier-standers-diam-7-9-mm-l-70-x-ep-1-mm-e1401456374?queryredirect=a_fp_lot_de_4_ressorts_de_compression_acier__standers__diam_7_9_mm__l_70_x_ep_1_mm&numpage=1 1 ressort de compression longueur 70mm] * 1 rondelle * 1 petite vis * 2 rivets * 5 cm de fil de cuivre diamètre 2mm * 1 domino électricien diamètre 4mm * Materiel plomberie/gaz: ** 100mm de tube fileté laiton 15/21 ** 2 ecrous borgne laiton 15/21 ** 1 écrou débouchant laiton 15/21 ** 1 manchon cuivre diamètre 12mm ** 1 manchon cuivre diamètre 14mm ** 1 mamelon laiton 15/21 * [https://www.leroymerlin.fr/v3/p/produits/clapet-anti-retour-acier-equation-diam-100-mm-e42735?queryredirect=a_fp_clapet_anti_retour_acier_equation__diam_100_mm&numpage=1 1 clapet ventilation, ici diamètre 100mm] * [https://www.leroymerlin.fr/v3/p/produits/loqueteau-a-bille-laiton-hettich-l-16-x-l-11-mm-e22655 1 loqueteau à bille] * 1 tube alu ou inox à la longueur de la paroi du mur de l'habitat, diamètre du clapet '''facultatif:''' * Pare-pluie * Adhésif d'étanchéitéfacultatif:''' * Pare-pluie * Adhésif d'étanchéité)
• Cultivo de moscas soldado negra  + (Los materiales utilizados dependerán del s … Los materiales utilizados dependerán del soporte utilizado para construir el hábitat de sus larvas. Se puede hacer en una caja de madera, una lata cortada en dos, una caja grande de plástico...
  Para el barco, usamos una caja de madera, ya que teníamos algunos tableros reciclados. !
  Las dimensiones de nuestra caja permiten tratar los residuos (alimentos y residuos secos del baño) de tres personas en promedio. Para la caja (120/65/30cm): *Tableros de 120/65cm x2 *Tableros de 120/30cm x2 *Tableros de 65/30cm x2 *Rastreles de madera *Escuadra Bisagras Tornillos *Pintura y barniz *Recipiente de plástico de 100/60/15cm *Tablillas y pedazos de madera para fabricar la rampa *Cámara de aire *Grapas *Cajas de plástico para recolectar las larvas Pour la jaula (80/50/45cm): *Rastreles de madera de 80/5/2cm x4 *Rastreles de madera de 41/5/2cm x2 *Rastreles de madera de 40/5/2cm x2 *Tablero de contrachapado de 50/45cm (Para el fondo) *Bisagra *Tornillos *Escuadras *Mosquitera *Tablero de 50/10cm (Para la abertura) Para las pupas y la puesta de huevos: *Cartón corrugado o viruta de madera separadas por una chincheta *Una caja para poner algunos residuos *Una caja para poner las pupas Sustrato seco (por ejemplo, fibra de coco) *Una caja para la hidratación de las moscas
  Considera impermeabilizar tu casa si no es resistente al agua. !
  fa-lightbulb-o"></i></div> <div class="icon-instructions-text">Considera impermeabilizar tu casa si no es resistente al agua. !</div> </div>)
• Rainwater harvesting  + (PVC pipes of different diameters, bends, junctions, T-shaped pipe a 50 liters container A ping-pong ball)
• Solar coffee roaster  + (Roaster: *Cement mixer, *Black painting, … Roaster: *Cement mixer, *Black painting, *Aluminum sheets, *Isolating material (fiberglass, rock wool, foam,..) Parabola: *Stainless steel or aluminum bars, *Metal frame, sheets of metal, *Wires Mechanical par: *Belt or chain, *Gears (toothed wheels), *Handle or motor or water wheeld wheels), *Handle or motor or water wheel)
• Kivuli cha jadi (au friji ya jangwa) kilichofanywa na sufuria za terracotta inakuwa nzito na vigumu kusafirisha. Toleo iliyotolewa hapa ni laini nyepesi na chini ya gharama kubwa, inayowezekana na vifaa vinavyoweza kupatikana kwa urahisi zaidi. Bahasha ni ya kitambaa, na tank ya ndani inaweza kuwa plastiki, chuma, au nyenzo yoyote ya mchanga-ushahidi. Tank hii ya ndani itafungwa na kuziba au nguo.  + (Tafsiri: Jangwa la friji mwanga version / 2 / sw * Inaweza ya ukubwa uliotaka, uliofanywa kwa plastiki au nyenzo nyingine za mchanga * Fine mesh kitambaa * Bodi ya mbao au nyingine * Hose ya plastiki ndogo na bomba * Chupa cha lita 5 au 6 * Mchanga)
• Solar air heater  + (The tutorial presented here is 2.09m x 1.0 … The tutorial presented here is 2.09m x 1.09m overall Sensor: * Chevron Douglas (here the final section is 95mm x 45mm) ** 2 of 2m10 ** 2 of 1m10 * 15 m of douglas sheets (20mm x 53mm) * Rigid plate (here plywood filmed, 10mm) * Rigid insulation (here Steico plate, 22mm) * Sika cartridge * Silicone cartridge * PU glue for outdoor wood gluing * Wood glue * Nails * Wood screws, from 30mm to 150mm * Comprehensive seal * Linseed oil * Wood varnish * 15 m of douglas sheets (30mm x 16 mm) * Aluminum adhesive * Tempered glass or polycarbonate plate (1m x 2m) * Expanded metal grid (300mm x 50mm) * 4 screw legs (example) * 1m of aluminum drip 100mm width (example) * Double-sided adhesive * Thin insulation (here parquet insulation) * 30 to 35 slates 320mm x 220mm, thickness 3,5mm * 8 reinforced squares, mini width 40mm * 1 tube diameter 100mm length of the housing wall, pvc / aluminum / stainless steel for the low entrance Valve system: * 1 Thermostatic cylinder Vernet EL 0769 * 100mm of brass tube diameter 4mm * compression spring length 70mm * 1 washer * 1 small screw * 2 rivets * 5 cm of copper wire diameter 2mm * 1 domino electrician diameter 4mm * Plumbing / gas equipment: ** 100mm of threaded brass tube 15/21 ** 2 brass blind nuts 15/21 ** 1 brass through nut 15/21 ** 1 copper sleeve diameter 12mm ** 1 copper sleeve diameter 14mm ** 1 brass nipple 15/21 * 1 ventilation valve, here diameter 100mm * 1 ball catch * 1 aluminum or stainless steel tube along the wall of the house wall, diameter of the valve '''optional:''' * Rain barrier * Sealant '''optional:''' * Rain barrier * Sealant)
• A wood-saving oven  + (• A metal canister of at least 30 cm in di … • A metal canister of at least 30 cm in diameter • Some bricks 4 cm thick maximum • A big bucket • A metal pipe 10 cm in diameter (the length depends on the height of the ceiling in the house and the chimney must exceed the roof by at least 30 cm). • Soil (clay soil if possible) • Cement • A grill whose width is slightly smaller than that of the canister • Wire mesh less than 0.5 cm canister • Wire mesh less than 0.5 cm)
• Dry Toilets For Family  + ("Notes" 1) Every measure in this tutorial … "Notes" 1) Every measure in this tutorial are only for the stainless steel bucket below and for wood of a thickness of 1,2 in. It will be very simple to adapt the measure depending on the equipment of everyone. 2) It isn't recommended to use any other materials than stainless steel for the bucket. The other materials such as galvanized steel or plastic don't react well with urine through time. Furthermore, you have to make sure the bucket can support the weight of anybody. That's why stainless steel is recommended. * [http://ecotrone.fr/seaux-et-couvercles-inox_2_seau-15-l-sans-base__0901-15.html A stainless steel bucket]. * Classic toilet lid. * [https://lecopot.com/473-thickbox/seau-21l-en-plastique-alimentaire-toilette-seche.jpg A plastic bucket] * A door hinge 4 inches large, preferably stainless steel. * Wood boards/shavings, here 1,2 in thick. * Screws, preferably stainless steel. * Wood glue. * Polyurethane glue. * A lag-screw 4,8 in long. * Sawdust (can be collected at a carpenter). * Dry vegetable matters like straw, dead leaves, etc. * Container allowing to stock sawdust, approximately 20 L. (bucket, bag, etc) * Container allowing to collect the sawdust (small shovel, pot, tin can, etc) * Reclaimed wood or palettes (creation of the composting area).alettes (creation of the composting area).)
• Biodiesel  + ('''1.1 Oil''' Our approach being the most … '''1.1 Oil''' Our approach being the most ecological possible, the oil used for making biodiesel is '''used cooking oil''' collected from all sorts of eating establishments. In order to collect the best sort of oil, talk to the owner of the restaurant as well as the chef so you can explain the purpose of your approach. Collecting oil without permission can be qualified as an offence. Furthermore, make sure you check the quality of the oil collected. Used oil contains free fatty acids. They appear when oil is left in the open air over a certain period of time and becomes rancid or when heated in the presence of water. Frying food (that contains water) therefore causes FFAs to appear in oil. During transesterification, these FFAs react with the catalyst (strong base) and create an unwanted soap. The soap stops the products of the reaction, biodiesel and glycerol, from separating correctly, which creates an emulsion that is difficult to work with. The more the cooking oil is used, the more the concentration in FFAs increases and becomes browner. '''Therefore, try to avoid collecting old, brown oil'''. The better the quality of the oil is, the easier the converting process will be. When making biodiesel, '''prefer''' using oil such as vegetable oil with a neutral pH or nearly neutral such as '''rapeseed, corn oil or sunflower oil'''. These oils have a low freezing point, which means they don't solidify if temperatures drop in winter (freezing temperatures for these oils range from -10°C to -2°C for rapeseed, -15°C for sunflower). '''Avoid peanut, coconut and palm oil or animal fats''' because the temperatures at which they solidify are too high (>10°C), even if biodiesel has a lower freezing point than the oil it originates from. Also ban olive oil that is too acidic, these acids could interfere during the reaction in the creating of biodiesel. '''1.2 Methanol''' Methanol, or wood alcohol, used to be obtained by wood pyrolysis. Nowadays, it is synthesized from natural gas and is mainly used as an antifreeze for coolants, as a solvent for the synthesis of other chemicals or as fuel in the racing field (dragsters, model engines). It can be purchased through suppliers who specialize in chemicals, some DIY stores and garages.
  To make biodiesel, it's important you use methanol that's practically pure (99%).
  It's very flammable and the slightest spark could cause burns or an explosion. It is also toxic and can cause blindness if inhaled or ingested.
  '''1.3 Catalyst''' Either sodium hydroxide (NaOH, caustic soda) or potassium hydroxide (KOH, caustic potash) can be used as a catalyst. They are both corrosive and highly basic. These chemicals are quite common and can be found in DIY stores, on line or through chemical suppliers. KOH and NaOH are both hygroscopic, which means they absorb the humidity in the atmosphere quickly. They become less efficient catalysts in the presence of water: always keep them in sealed, airtight containers. '''NaOH vs KOH, different properties.''' * Sodium hydroxide (NaOH) is less expensive and commonly used to make biodiesel on a small scale. However, sodium hydroxide (NaOH) contaminates the water used for cleaning biodiesel and must not be disposed of in nature. We therefore suggest you don't use it if you cannot ensure water treatment. * Potassium hydroxide (KOH) having higher catalysis properties, is gaining in popularity. Potassium hydroxide (KOH) dissolves easier in methanol and is less sensitive to water. Furthermore, the glycerin obtained through the reaction remains liquid and can be added to compost with more safety or used in small amounts as a supplement for animal feed.ed through the reaction remains liquid and can be added to compost with more safety or used in small amounts as a supplement for animal feed.)
• Ram pump  + ('''Do not use plastic material for the ram … '''Do not use plastic material for the ram, whether valves or flaps, as they will wear out very quickly during operation..'''
  This is an example for the case of a ram pump dimensioned in 26/34mm, but it has to be adapted according to the results of the dimensioning (Step 2
  '''To buy:''' * Valve of 26/34mm * 1 Elbow of 26/34 * 3 Male plumbing nipples in 26/34 * 1 Tee of 26/34 * 1 Strainer in 26/34 or a plastic check valve inside (see step 5) * 1 Check valve in 26/34 with stainless steel/brass interior * 2 Valves in 20/27 or 1 valve with drain valve * 1 Cross of 20/27 * 1 Reduction from 26/34 to 20/27 * 1 or 2 Teflon rollers for sealing the entire assembly * Thread lock for fixing the threaded rod * 4 Rods with wing nuts * A dozen washers with an internal diameter of 6mm * 2 Nuts for M5 threaded rod '''To be recovered:''' * 1 Extinguisher of 7 or 9 litres * 1 Inner tube or other rubber to make a seal * Nails * 1 Wooden board * Flat iron 20 or 30 mm wide, about 60 cm * A torch (according to step 5)1 Wooden board * Flat iron 20 or 30 mm wide, about 60 cm * A torch (according to step 5))
• Domestic biodigestor  + ('''Matter circuit''' * 1 60 L can * 1 160 … '''Matter circuit''' * 1 60 L can * 1 160 mm plug * 1 160-100 mm reducer * 1 100-50 mm reducer * 1 meter PVC 50 mm tube * 4 45° 50 mm PVC MF bends * 2 50 mm separable connections * 2 50 mm through wall connectors * 2 MM 50 mm sleeves * 1 50 mm PVC plug * PVC glue * Etchant * Joint compound for plumbing '''Gas circuit''' * 2 planar nuts 1/2’ for through wall gas connector * 1 batch of planar joints * 1 threaded tube of 1/2’ * 1 brass MF 1/2’ bend * 1 connector FF 1/2’ gland nut * 1 gas valve 15x21 MM * 1 batch of hose clamps * 1 gas pin 1/2’ F * 5 m gas pipe * 1 water filter * 1 sulfur filter made of clay balls * 2 gas valves * 3 T gas pipes * 1 compressed air dismountable connector * 1 manometer * 1 flexible 150L water tank * 1 gas compressor * 1 gas cooker * 1 heat matas compressor * 1 gas cooker * 1 heat mat)
• Spirulina farming  + ('''Spirumeter'''. * White plastic cap * Sc … '''Spirumeter'''. * White plastic cap * Screws * Wooden or plastic rod or ruler '''Medium of culture'''. * Drinking water * Sea salt * Bicarbonate of soda '''Mineral Food''' * Potassium Nitrate * Monoammonium phosphate * Iron Sulfate * Potassium Sulfate (optional) * Magnesium sulfate (optional) or *[https://spirulinasolutions.fr/boutique/nourriture-minerale-de-la-spiruline/ Pre-weighed food for sale N50 and N250] '''Natural food''' * White vinegar * 100g rusty nails * 5 to 10 lemons or citric acidusty nails * 5 to 10 lemons or citric acid)
• Micro-gasifier Cooking Stove  + ( * A large tin can (in terms of both heig … * A large tin can (in terms of both height and width) (1): for the external chamber; * A tin can which is slightly shorter and thinner (2): for the combustion chamber; * A tin can with the same diameter as the combustion chamber (3): for the stand on which the pan sits. r (3): for the stand on which the pan sits. )
• Desert fridge  + ( * - 1 clay pot of 50 x 46 cm, preferably … * - 1 clay pot of 50 x 46 cm, preferably round ( 50cm diameter ) *1 clay pot of 30 x 40 cm, preferably round ( 30cm diameter ) *About 45 kg of fine sand * About 15 litres of drinking water* *1 breathable fabric or cover Adaptability : The dimensions of the two jars vary according to the quantity of food you wish to be able to preserve. Here we propose to build a Zeer Pot that can contain 12 kg of food. This will require an outer pot 50 cm in diameter and an inner pot 30 cm in diameter. The size can be adapted according to the needs provided that the proportions are respected. Health precautions : Attention : *Using contaminated water could contaminate the food deposited in the inner pot. The same will apply if the sand contains harmful elements such as hydrocarbons. ains harmful elements such as hydrocarbons. )
• Bokashi “Kitchen compost”  + ( * 3 food grade buckets of 5L (gatherable … * 3 food grade buckets of 5L (gatherable in restaurants) and a lid which enables a hermetical sealing. One is the compost box. One is the elevator . One is the receiver. * One tap adaptable for plastic buckets (with seal and tightening nut) * 1L of approx. 3mm diameter pumice * Organic waste * 1 Flask of EM A (available at [http://www.synbiovie.fr/ Bertrand Grevet, Synbiovie], French specialist) and/or 1 bag of his EM inseminated wheat bran. , Synbiovie], French specialist) and/or 1 bag of his EM inseminated wheat bran. )
• Recycling shower  + ( * A tank or a plastic container with a mi … * A tank or a plastic container with a minimum capacity of 10L * A bunghole with overflow system and closing system * One 1/2" male gland * An instantaneous water-heater (Electrical with fuse or gas depending on context) * A self-priming pump type camping car, 12V, minimum 10L/min ([https://www.pompe-shurflo.com/series-5000-2086 example]) + 220V>12V power supply adapted (about 4A in 12V) * An accumulator adapted to the pump ([https://www.pompe-shurflo.com/accessoires/accumulateur-shurflo-181-101-au-meilleur-prix-2345.html?search_query=accumulator&results=1 example]) * A filtration station with associated cartridges ( 50 microns, 20 microns, activated carbon) ([https://www.leroymerlin.fr/v3/p/produits/station-de-filtration-d-eau-de-pluie-equation-e10775 example]) * Male to male adapters 3/4>1/2 for filter holders and possibly wall passageways * A 3-way valve * Flexible female / female 1/2 * Teflon coil * Optional: a shower tray * Optional: UV lamp on coil * Optional: a shower tray * Optional: UV lamp )
• Plastic bottle cutter  + ( * A wood board ep. 10mm x L. 20cm x l. 15cm * A cutter blade * Two bolts L. 50mm x D. 5mm * 12 washers diameter 5mm )
• Biofiltre pour bioponie  + ( * Bonbonne d'eau de 20L, usagée. * Grilla … * Bonbonne d'eau de 20L, usagée. * Grillage fin ou moustiquaire. * Robinet de cuve. * Scotch. * Tissu opaque (facultatif). * Bulleur d'aquarium. * Tuyau adapté au bulleur (environ 1m) + jonctions. * Tube plastique de 8mm de diamètre et de la hauteur de la bonbonne. * couvercle bombé ou assiette usagée d'un diamètre un peu plus petit que la bonbonne. * Élastique permettant d'enserrer la bonbonne. * Roche volcanique ou bille d'argile et paillis sec (environ 5L). '''Remarque''': Cette liste de matériaux est à adapter en fonction des ressources disponibles à chacun. nction des ressources disponibles à chacun. )
• Ceramic water filter  + (Materials Sawdust clay clean water: for mixing with the clay and the flow tests colloidal silver container with tap (ceramic, plastic, metal) plastic bags for the pressing process Fuel for the oven)
• Bio-sand filter for drinking water  + ( * One meter of PVC pipe for drinking wate … * One meter of PVC pipe for drinking water adduction, 100mm diameter. * One PVC plug, adapted to the pipe. * One cover * PVC glue. * Sand, if possible from crushed stones, diameter 0-1mm, in order to fill 60 of the pipe. * Gravel zone, 6-10 mm, in order to fill 10cm of the pipe. * Flexible plastic pipe intented for food. * 3 bends, adapted to the flexible pipe. * Silicone s, adapted to the flexible pipe. * Silicone )
• Pasteurisation of Fruit and Vegetables  + ( * Surplus fruit and vegetables * Water )
• Lacto-Fermented Preserves  + ( * Vegetables which are usually eaten raw * Table salt * Water )
• Solar water heater  + ( * fridge doors of similar size (support) … * fridge doors of similar size (support) * grilles on the back of fridge of similar size (sensor) * rot-resistant wooden battens (douglas, larch ...) * 16mm-diameter copper tubes (plumbing) * double-glazed window panel * wood screw or self-drilling screw * washers * polyurethane sealant * corks * brass solder rods and paint stripper (?? - should this be flux?) paint stripper (?? - should this be flux?) )
• Plastic pyrolyzer  + ( *1 large stainless steel tank with lid *3 small stainless steel tanks *copper pipes (diameter 6mm) *7 copper uniseal joint (for watertightness of joints) *O-ring (for watertightness of tanks) *Plastic waste PP and/or HDPE/LDPE )
• Micro gasifier stove  + ( *A large and tall can (1): this will be the outer chamber; *A can slightly narrower and slightly lower (2): this will be the combustion chamber; *A can of the same diameter as the combustion chamber (3): this will be the support for the pan. )
• Bio-Coal  + ( *Agricultural residue : straws For 50 kilo of straws *100L water *5.5kg clay *15 kg crushed peanut shells )
• Water Ceramic Filter  + ( *Clay, * Wood fines, *Silver, *Plastic container with a tap, )
• Atelier Entrepreneuriat et démarche low-tech  + ( *Eléments de connaissance de la démarche … *Eléments de connaissance de la démarche low-tech (un développement du triptyque Utile - Durable - Accessible) *Un modèle d'activité entrepreneuriale simple (ici, une boulangerie) *Un exemple concret et correspondant pouvant être observé (donc, une boulangerie) ouvant être observé (donc, une boulangerie) )
• Cultivation of oyster mushrooms  + ( *Petri dish *Alcohol *Cardboard *Plastic bottles *Fresh mushrooms *Cotton *Substrate (wood chips, coffee grounds, sawdust, straw,...) )
• Solar water heater  + ( *Pipe pvc 20mm *Elbow pipe pvc 20mm *T pvc 20mm *Adhesive tape for plumbing *Plastic bottle *Reservoir )
• Four solaire type tube transportable et à base de récup  + ( *Un tube de cuisson solaire, longueur 61. … *Un tube de cuisson solaire, longueur 61.4 cm, diamètre extérieur 16 cm *Une plaque offset (à récupérer dans une imprimerie), la taille dans ce tuto est 1055 mm x 810 mm x 0.3 mm *Une plaque de contreplaqué ou autre bois un minimum durable, épaisseur 20 mm et d'au moins 80 cm x 40 cm *Une plaque de contreplaqué ou autre bois un minimum durable (OSB trouvé dans ce tuto), épaisseur 15 mm et d'au moins 70 cm x 80 cm *Traverse de palette, d'au moins 120 cm de long, 60 cm de large et 15 mm d'épaisseur (ici 120 cm x 72 mm x 17 mm) *Des vis à bois, diamètre 4 mm, longueur de 40 mm et D3L12 *Charnière piano largeur 32 mm et longueur minimum de 40 cm *Morceaux de chambre à air *Petit crochet métallique pour verrouiller la parabole en position ouverte Pour la cuillère en inox : *1 tube inox creux ⌀ 125 mm d'au moins 50 cm de longueur (type tuyau cheminée ou poêle) *2 bouchons inox ⌀125 mm (type bouchon de conduit de cheminée) *A défaut du tuyau + bouchons assez onéreux, on peut acheter (ou récupérer) une tole inox (alimentaire 304 ou 316) et faire soi-même la cuillère en courbant et soudant les bouchons. illère en courbant et soudant les bouchons. )
• Farming of edible crickets  + ( *Waterproof box * Cartons: egg tray type *A plastic glass *2 containers (dish) * A tray *Fine mesh *Coconut fibre or ground dry matter *Food for crickets (here finely crushed wheat) )
• Preservation module  + ( *Wood boards *Threaded steel rods *Nuts *Clay pots (2 different sizes) *Moskito net *Tarp *Sand )
• The Norwegian Kettle (Hay Box)  + ( *Wooden planks from wine boxes, palettes, … *Wooden planks from wine boxes, palettes, plywood off-cuts, etc. .... *Nails * 1 foil blanket * 1 duvet for insulation *Assembly feet and screws *A wooden box *A box * A cardboard box * A chest *An old polystyrene fish box * A basket * A bucket with a lid *A cooler *An insulated bag *A toy box *A washing tub *A trunk or a suitcase *A kitchen cupboard or draw * A hole in the ground *...... You get the idea Other options for the insulating material * Blanket *Duvet *Eiderdown *Sleeping bag *Wool *Textiles (old pullovers, anoraks, towels, curtains...); *Cushions *Jute sacs *Hemp *Sawdust *Bark *Cork *Polystyrene *Foil blanket (survival blanket) *Straw, hay... *Glass wool *Banana leaves *... raw, hay... *Glass wool *Banana leaves *... )
• Thrifty and stand-alone water point  + (1 wooden box 1 plastic bottle 1 wooden b … 1 wooden box 1 plastic bottle 1 wooden batten 1 small wooden plank (6x8 cm - 2,37x3,15 inch) 1 piece of iron wire 1 thin silicone tube (ex : baby nose cleaner, breast pump ...) 1 elastic 1 big nail (7 to 8 cm - 2,75 to 3,14 inch) A few screws 1 staple2,75 to 3,14 inch) A few screws 1 staple)
• Hydroponics  + (1. Crop gutters * Cleats (minimum width 1 … 1. Crop gutters * Cleats (minimum width 10cm) * Plastic sheeting * Staples * Clay beads
  Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots
  * Brackets * Wood screws * Young shoots and cuttings 2. Irrigation system * 1 Submersible pump (aquarium pump) * 5 m of thin plastic pipe (pump outlet) * 1 End cap with 4 outlets for fine pipe * 50 cm of wide plastic tube (Link between the filter and the bio-filter) * 1 Wide pipe end cap (to be fixed on the filter tank) * 1 Blower 3. Filter and bio-filter * 2 plastic bins of 60L * Large gravel * Sand * 10L Clay beads * 40L of water [[:Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation.]] 4. Control system * Socket outlet with programmable timer or Arduino[[:Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation.]] 4. Control system * Socket outlet with programmable timer or Arduino)
• Hydroponie  + (1. Gouttières de cultures *Tasseaux (10cm … 1. Gouttières de cultures *Tasseaux (10cm de largeur minimum) *Bâche plastique *Agrafes *Billes d'argiles
  Préférer les petites billes d'argiles, celles-ci sont plus lourdes et permettront un meilleur maintien des racines
  *Équerres *Vis à bois *Jeunes pousses et boutures 2. Système d'irrigation *1 Pompe immergée (pompe d'aquarium) *5 m de tuyau plastique fin (Sortie pompe) *1 Embout avec 4 sorties pour tuyau fin *50 cm de tuyau plastique large (Lien entre le filtre et le bio-filtre) *1 Embout de tuyau large (à fixer sur le bac du filtre) *1 Bulleur 3. Filtre et bio-filtre *2 Bacs en plastique de 60L *Gros gravier *Sable *10L Billes d'argile *40L d'eau
  Afin d'assurer une homogénéité de l'eau en nutriments et en température, nous conseillons d'utiliser environ 40L d'eau par mètre carré de culture.
  4. Système de commande *Prise de courant avec minuterie programmable ou Arduinoeau par mètre carré de culture. </div> </div> 4. Système de commande *Prise de courant avec minuterie programmable ou Arduino)
• Hydroponie  + (1. Gouttières de cultures *Tasseaux (10cm … 1. Gouttières de cultures *Tasseaux (10cm de largeur minimum) *Bâche plastique *Agrafes *Billes d'argiles
  Préférer les petites billes d'argiles, celles-ci sont plus lourdes et permettront un meilleur maintien des racines
  *Équerres *Vis à bois *Jeunes pousses et boutures 2. Système d'irrigation *1 Pompe immergée (pompe d'aquarium) *5 m de tuyau plastique fin (Sortie pompe) *1 Embout avec 4 sorties pour tuyau fin *50 cm de tuyau plastique large (Lien entre le filtre et le bio-filtre) *1 Embout de tuyau large (à fixer sur le bac du filtre) *1 Bulleur 3. Filtre et bio-filtre *2 Bacs en plastique de 60L *Gros gravier *Sable *10L Billes d'argile *40L d'eau
  Afin d'assurer une homogénéité de l'eau en nutriments et en température, nous conseillons d'utiliser environ 40L d'eau par mètre carré de culture.
  4. Système de commande *Prise de courant avec minuterie programmable ou Arduinoeau par mètre carré de culture. </div> </div> 4. Système de commande *Prise de courant avec minuterie programmable ou Arduino)
• Wtl  + (1x couvercle de la chasse d'eau modifier e … 1x couvercle de la chasse d'eau modifier en plastic recycler avec bague en polyester et un etonnoir en plastic récupérer. 2 à 8 x seaux (arrosoirs) en caoutchouc souple, marque Red Gorilla, chacun sa bague en '''S''' 1 x bac de 14l caoutchouc souple, marque Red Gorilla, la dedans en prendre notre douche. Après 2 minutes il est plein. Écope avec la grande Becprès 2 minutes il est plein. Écope avec la grande Bec)
• Solar Generator Trailer- Electrical System  + (<br/> <table class="wikitable"> …
  

  Quantity	Designation	New Material Price	Project Material Price (donation, second-hand, reclaimed)
  3	Peimar 330W Solar Pannel	500	105
  1	Victor Energy Phoenix 24V/1200VA Inverter	503	200
  1	Schneider Electric Connext 60A/150V MPPT charge controller	650	0
  12	Hawker 4PzS240 traction battery - 2V 240Ah	1980	650
  1	Victron Energy BMV700 battery controller + crimped cable + wall bracket + VE Direct Bluetooth Smart Dongle	250	250
  1	Fuse MEGA-Fuse 125A / 32V (x5) + Fuse holder MEGA Victron Energy	33	33
  1	Schneider Electric C120N 125A Circuit Breaker	320	0
  2	Schneider Electric iC60N 63A Circuit Breaker	25	0
  1	Schneider Electric Resi9 10A Circuit Breaker	15	0
  1	Schneider Electric 30mA/40A differential Circuit Breaker	90	0
  16m	1x4mm² red/black solar cable with MC4 connector	24	0
  1	Male MC4 Connector	4	0
  1	Female MC4 Connector	4	0
  6m	Red / blue / green-yellow cable 1x16mm²	16	16
  6	Tubular battery terminal 16mm²-12	4	4
  2	Tubular battery terminal 35mm² - 10	2,6	2,6
  6	Gray PG16 cable gland + Washer	11,5	11,5
  6	Gray PG11 cable gland + Washer	9,5	9,5
  1	Bloc multiprise extérieur IP44	14	14
  TOTAL		4442 € (~4,764.22 $USD)	1282 € (~1,375.00 $USD)

  gt; <td>1 </td><td>Male MC4 Connector </td><td>4 </td><td>0 </td></tr><tr> <td>1 </td><td>Female MC4 Connector </td><td>4 </td><td>0 </td></tr><tr> <td>6m </td><td>Red / blue / green-yellow cable 1x16mm² </td><td>16 </td><td>16 </td></tr><tr> <td>6 </td><td>Tubular battery terminal 16mm²-12 </td><td>4 </td><td>4 </td></tr><tr> <td>2 </td><td>Tubular battery terminal 35mm² - 10 </td><td>2,6 </td><td>2,6 </td></tr><tr> <td>6 </td><td>Gray PG16 cable gland + Washer </td><td>11,5 </td><td>11,5 </td></tr><tr> <td>6 </td><td>Gray PG11 cable gland + Washer </td><td>9,5 </td><td>9,5 </td></tr><tr> <td>1 </td><td>Bloc multiprise extérieur IP44 </td><td>14 </td><td>14 </td></tr><tr> <td>TOTAL </td><td> </td><td>4442 € (~4,764.22 $USD) </td><td>1282 € (~1,375.00 $USD) </td></tr></table>)
• Multifunctional Crankset  + (<div class="mw-translate-fuzzy"> *Bi …
  *Bike with derailleur gears *Belts of different sizes (to be measured depending on your mounting. They can be found in lawnmowers, or in garages) *Fasteners, eye straps and metal corner braces *Wood (battens, plywood, pallet boards) *Pulleys around 60mm in diameter (can be found in hardware stores)
  iameter (can be found in hardware stores) </div>)
• Fogger  + (<div class="mw-translate-fuzzy"> PVC tube diameter 60 </div>)
• Fermented drinks - Homemade sodas  + (<div class="mw-translate-fuzzy"> *Fruit peels or rinds (orange, lemon, ginger, kiwi, mango, pineapple...) *Sugar (white, brown) *Water </div>)
• Wind turbine  + (<u>Wind turbine</u> 1- A wood … Wind turbine 1- A wooden plank (minimum 10mm thick) 2- A piece of flat steel (minimum 2mm thick) 3- A stepper motor from a printer (with it's connectors) 4- A PVC tube (diameter between 55mm and 100mm; wall thickness minimum 3mm) 5- A bicycle inner tube 6- Some wood screws Electric circuit : 3- Stepper motor from a printer 8- A support made from plastic, to take the different system components (you could e.g. use a flat part of the printer housing) 9- Two rectifier diodes or bridge rectifiers 10- One capacitor, 1000µF 16V 11- A voltage stabilizer LM7805 for fixing the voltage at 5V or LM7812 for fixing the voltage at 12V 11'- Instead of the tension stabilizer you could also use a voltage amplifier or a DC/DC booster or even more advance it by supplying the USB connector with a voltage between 0,9 and 5 Volts. 12- An USB connector 13- solder 14- wire Also take a look at global 3D model of this wind turbine after reading. [https://cad.onshape.com/documents/e2f661f83cf12a82e9ecb8f5/w/cd00be7c7cf2b2a8cc586f3c/e/b08da6447db094a9319da5fe]a82e9ecb8f5/w/cd00be7c7cf2b2a8cc586f3c/e/b08da6447db094a9319da5fe])
• Worm Compost Bins  + (Large plastic or iron container with lid, … Large plastic or iron container with lid, 100 – 200 l Stainless ball or butterfly valvetap (1/2” inch or 3/4” inch) with hydraulic fittings Teflon Rocks, peppels, gravel, or expanded clay balls Sand. Not salty sand from sea! Good loamy soil to 30/40 cm height Cow or horses manure, several big handfuls, broken up Kitchen wastes, a bit. To be added to the system after 10 days Worms (100/ 200, depending on the dimension of the barrel). Better the red worm, they are more active and efficient, even if not local! Dry leaves or straw 2/3 ventilation filter in plastic of 10/12 cm diameter [ Mosquito net can be used instead of the ventilation filters.] silicon Bricks or other material 2 old big T-shit Non-woven blanketrial 2 old big T-shit Non-woven blanket)
• Chauffage solaire version ardoise  + (Le tutoriel présenté ici fait 2,09m x 1,09 … Le tutoriel présenté ici fait 2,09m x 1,09m hors tout '''Capteur:''' * Chevron en douglas (Ici la section finale est de 95mm x 45mm) ** 2 de 2m10 ** 2 de 1m10 * 15 m de Liteaux en douglas (20mm x 53mm) * Plaque rigide (ici contreplaqué filmé, 10mm) * Isolant rigide (ici plaque de Steico, 22mm) * Cartouche de sika * Cartouche silicone * Colle PU pour collage bois extérieur * Colle à bois * Clous * Vis à bois, de 30mm à 150mm * Joint compribande * Huile de lin * Vernis bois * 15 m de Liteaux en douglas (30mm x 16 mm) * Adhésif aluminium * Vitre trempé ou plaque polycarbonate (1m x 2m) * Grille en métal déployé (300mm x 50mm) * 4 pattes à vis ([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de larmier aluminium de largeur 100mm ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adhésif double face * Isolant mince (ici isolant de parquet) * 30 à 35 ardoises 320mm x 220mm, épaisseur 3,5mm * 8 équerres renforcées, largeur mini 40mm * 1 tube diamètre 100mm longueur de la paroi de l'habitat, pvc/alu/inox pour l'entrée basse '''Système clapet:''' * [https://www.lextronic.fr/actionneurs-electriques/28536-verin-thermostatique.html 1 Vérin thermostatique Vernet EL 0769] * 100mm de tube laiton diamètre 4mm * [https://www.leroymerlin.fr/v3/p/produits/lot-de-4-ressorts-de-compression-acier-standers-diam-7-9-mm-l-70-x-ep-1-mm-e1401456374?queryredirect=a_fp_lot_de_4_ressorts_de_compression_acier__standers__diam_7_9_mm__l_70_x_ep_1_mm&numpage=1 1 ressort de compression longueur 70mm] * 1 rondelle * 1 petite vis * 2 rivets * 5 cm de fil de cuivre diamètre 2mm * 1 domino électricien diamètre 4mm * Materiel plomberie/gaz: ** 100mm de tube fileté laiton 15/21 ** 2 ecrous borgne laiton 15/21 ** 1 écrou débouchant laiton 15/21 ** 1 manchon cuivre diamètre 12mm ** 1 manchon cuivre diamètre 14mm ** 1 mamelon laiton 15/21 * [https://www.leroymerlin.fr/v3/p/produits/clapet-anti-retour-acier-equation-diam-100-mm-e42735?queryredirect=a_fp_clapet_anti_retour_acier_equation__diam_100_mm&numpage=1 1 clapet ventilation, ici diamètre 100mm] * [https://www.leroymerlin.fr/v3/p/produits/loqueteau-a-bille-laiton-hettich-l-16-x-l-11-mm-e22655 1 loqueteau à bille] * 1 tube alu ou inox à la longueur de la paroi du mur de l'habitat, diamètre du clapet '''facultatif:''' * Pare-pluie * Adhésif d'étanchéitéfacultatif:''' * Pare-pluie * Adhésif d'étanchéité)
• Solar Oven (box-type oven)  + (The box: * 9 plywood panels of 500x500mm … The box: * 9 plywood panels of 500x500mm and around 10mm of thickness (not too thick to not overweight the box) * Isolator of around 40mm of thickness (4 panels of 500x500mm): polystyrene (available at the fishmonger/ at the and of the market or in electric shop), cork panel, vermiculite... * 4 meters of stick (same thickness of the isolator) * Aluminium paper or black tape (more expensive) * Casing assembly 4x40 (around 80) * Nails 1,5x25mm (around 10) Glass, cadre and ears: * Glass of 410x470mm, not too thick, 2 to 3mm (available in carpenters' trashes) * Chipboard panel of the same thickness of the winder, one of 500x500mm and another one of 500x550mm * Wood pallet or wooden board (8 boards of around 500x60mm and not to thick (around 20mm) * 1 meter of thin hinge with flat head screws OR 6 hinges * 3 meters of string (4mm of diameter) * Sealmeters of string (4mm of diameter) * Seal)
• Black Soldier Fly breeding  + (The materials used will depend on the supp … The materials used will depend on the support used to build the living space of your larvae. This can be done in a wooden box, a drum cut in half, a large plastic box...
  For the boat, we chose a wooden box because we had recovery boards
  For an order of size, our box will allow to treat waste (food and from dry toilets) produced by 3 persons. For the box (120/65/30cm):
  *120/65cm x2 wood boards *120/30cm x2 wood boards *65/30cm x2 wood boards *Iron angles *Hinges *Screw *Paint and varnish *Plastic tray of 100/60/15cm *Plank and pieces of wood to make the ramp *Inner tube *Staples *Plastic box to collect larvae
  For the aviary (80/50/45cm): * Wood bars of 80/5/2cm x4 * Wood bars of 41/5/2cm x2 * Wood bars of 40/5/2cm x2 *50/45cm plywood board (for the bottom) *Hinges *Screw *Angles *Mosquito net *50/10cm board (for opening) For pupae and egg laying: *Cardboard or wooden plates separated by pins *A box to put some waste *A box to put the pupae *Dry substrate (coconut fiber...) *A box for the hydration of flies
  Don't forget to protect the living space from the water. The eggs will burst with water!
  b-o"></i></div> <div class="icon-instructions-text">Don't forget to protect the living space from the water. The eggs will burst with water!</div> </div>)
• Haybox or fireless cooker made of a wool blanket  + (• A blanket for a double bed (preferably wool) • Fabric • Sewing thread • 2 Velcro strips, approx. 30 cm long)
• Bait for Melipona bees  + (• Two 2-3 litre plastic bottles • Newspaper • Black plastic bags • Adhesive tape • Iron wire • 90° Alcohol • Bee propolis from the target species)