Recherche par propriété

Cette page fournit une simple interface de navigation pour trouver des entités décrites par une propriété et une valeur nommée. D’autres interfaces de recherche disponibles comprennent la page recherche de propriété, et le constructeur de requêtes ask.

Recherche par propriété

Une liste de toutes les pages qui ont la propriété « Material » avec la valeur « * Gravel (granule size 12/20 or 20/40mm) * Gravel (granule size 4/8, 4/12, or 6/10 mm) * Washed silica sand * Puncture-resistant geotextile * EPDM sheeting * PVC pipes * 2 PVC T-connectors * Drains * PVC Glue * 2 manholes * 2 valves * 2 pass-through fittings ». Puisqu’il n’y a que quelques résultats, les valeurs proches sont également affichées.

Affichage de 43 résultats à partir du n°1.

Voir (200 précédentes | 200 suivantes) (20 | 50 | 100 | 250 | 500).


    

Liste de résultats

    • Phyto-Purification of Wastewater  + ( * Gravel (granule size 12/20 or 20/40mm) * Gravel (granule size 12/20 or 20/40mm) * Gravel (granule size 4/8, 4/12, or 6/10 mm) * Washed silica sand * Puncture-resistant geotextile * EPDM sheeting * PVC pipes * 2 PVC T-connectors * Drains * PVC Glue * 2 manholes * 2 valves * 2 pass-through fittings nholes * 2 valves * 2 pass-through fittings )
    • Manual Pump (vertical)  + ( * The parts for the pump mentioned here * The parts for the pump mentioned here are all made of PVC: * 3 adapters 50mm-25mm * 2 couplings 50mm diameter * 1 tee 50mm-25mm * 1 or 2 elbows 25mm (in accordance with requirements for water outlet) * 1 - 2 metres of 25mm diameter tubing (in accordance with requirements for water outlet) * 1 - 2 metres tubing 50mm diameter * 2 (glass) marbles with a diameter greater than 25mm, * 2 screws 50mm long (minimum) For the piston: * 1 - 2 metres of tubing 40mm, * 1 Tee XXmm-40mm * 1 x tube cap 40mm (or preferably slightly larger) * acetone (or similar solvent) tly larger) * acetone (or similar solvent) )
    • Desert fridge - light version  + ( * Container of the desired size, either in plastic either in any other sand-proof material * Fabric with a thin stitch * Board, either in wood either any other material * Little plastic hose with a tap * Bottle of 5 or 6 litters * Sand )
    • Wüstenkühlschank leichte Version  + ( * Flasche in der gewünschten Größe, aus Kunststoff oder anderem sanddichtem Material. * Feinmaschiges Gewebe * Holz- oder andere Bretter * Kleines Kunststoffrohr mit Gewindebohrer * Flasche mit 5 oder 6 Liter Inhalt * Sand )
    • Bassin de culture de spiruline  + ( * Vis à bois de 50 à 100 mm de long * Volige 18 mm * Demi-chevron * Pieds de nivellement * Géotextile * Bâche étanche * Agrafes * Bâche de serre ou film alimentaire * Plaque de polycarbonate de 3x1 m * Cartons * Silicone )
    • Manual pump (vertical)  + (All these pieces are here in PVC for the All these pieces are here in PVC for the pump : - 3 adapter 50mm-25mm - 2 couplings 50mm - 1 T 50mm-25mm - 1 or 2 25mm elbows (depending on water outlet requirements) - between 1 and 2 metres of 25mm tube (depending on water outlet requirements) - between 1 and 2 meters of 50mm tube - two balls over 25mm in diameter (glass balls) - 2 screws at least 50 mm long for the piston : - between 1 and 2 meters of 40mm tube - 1 T XXmm-40mm - 1 tube cap of 40mm, if possible a little wider paint stripper (acetone type)ittle wider paint stripper (acetone type))
    • Mooli-Benne  + (Benne: * 1 Tôle Acier 1100/1700/3mm * 2 TBenne: * 1 Tôle Acier 1100/1700/3mm * 2 Tôle Acier 450/1700/3mm * 2 Tôles Acier 600/1300/3mm * 16 Équerres Acier 30/30/3mm * 8 Tubes carré Acier 40mm * 4 Tubes carré Acier 50mm * 3 Fer U Acier 40/35/3mm * 2 Fer U Acier 40/30/3mm * 3 Fer U Acier 60/50/3mm * 4 Fers plats Acier 30/3mm * Fers à béton Ø10mm * 4 Tôles Acier 100/100/8mm * 1 Tôle Acier 100/100/6mm * 1 Tôle Acier 400/400/5mm * 4 Écrous M12 * 4 Boulons M12 x65mm Cadre: * 4 Équerres Acier 60/60/3mm * 2 Barres Acier Ø20mm * 2 Blocs Acier 35/35/80mm * 2 Tubes Acier Ø30mm * 4 Blocs Acier 150/60/10mm * 1 Barre Acier Ø60mm * 4 Goupilles Ø5x30mm * 4 Rondelles Ø50x3mm Charrette traction asine: * 10 Équerres Acier 50/50/3mm * 1 Fer carré Acier 35mm * 4 Tubes Acier Ø34mm * 4 Planches Bois 1700/300/50mm * Fers à béton Ø12mm * 2 Tôle Acier 300/300/2,5mm * 16 Écrous M12 * 16 Boulons M12 x65mm * 2 Roues 155 70 R13 75T MS Manivelles: * 1 Tube carré Acier 40mm * 1 Tube carré Acier 25mm * 2 Barres Acier Ø20mm Assemblage: * 10 Écrous M12 * 10 Boulons M12 x65mme: * 10 Écrous M12 * 10 Boulons M12 x65mm)
    • Worm Compost Bins  + (Large plastic or iron container with lid, Large plastic or iron container with lid, 100 – 200 l Stainless ball or butterfly valvetap (1/2” inch or 3/4” inch) with hydraulic fittings Teflon Rocks, peppels, gravel, or expanded clay balls Sand. Not salty sand from sea! Good loamy soil to 30/40 cm height Cow or horses manure, several big handfuls, broken up Kitchen wastes, a bit. To be added to the system after 10 days Worms (100/ 200, depending on the dimension of the barrel). Better the red worm, they are more active and efficient, even if not local! Dry leaves or straw 2/3 ventilation filter in plastic of 10/12 cm diameter [ Mosquito net can be used instead of the ventilation filters.] silicon Bricks or other material 2 old big T-shit Non-woven blanketrial 2 old big T-shit Non-woven blanket)
    • Chauffage solaire version ardoise  + (Le tutoriel présenté ici fait 2,09m x 1,09Le tutoriel présenté ici fait 2,09m x 1,09m hors tout '''Capteur:''' * Chevron en douglas (Ici la section finale est de 95mm x 45mm) ** 2 de 2m10 ** 2 de 1m10 * 15 m de Liteaux en douglas (20mm x 53mm) * Plaque rigide (ici contreplaqué filmé, 10mm) * Isolant rigide (ici plaque de Steico, 22mm) * Cartouche de sika * Cartouche silicone * Colle PU pour collage bois extérieur * Colle à bois * Clous * Vis à bois, de 30mm à 150mm * Joint compribande * Huile de lin * Vernis bois * 15 m de Liteaux en douglas (30mm x 16 mm) * Adhésif aluminium * Vitre trempé ou plaque polycarbonate (1m x 2m) * Grille en métal déployé (300mm x 50mm) * 4 pattes à vis ([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de larmier aluminium de largeur 100mm ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adhésif double face * Isolant mince (ici isolant de parquet) * 30 à 35 ardoises 320mm x 220mm, épaisseur 3,5mm * 8 équerres renforcées, largeur mini 40mm * 1 tube diamètre 100mm longueur de la paroi de l'habitat, pvc/alu/inox pour l'entrée basse '''Système clapet:''' * [https://www.lextronic.fr/actionneurs-electriques/28536-verin-thermostatique.html 1 Vérin thermostatique Vernet EL 0769] * 100mm de tube laiton diamètre 4mm * [https://www.leroymerlin.fr/v3/p/produits/lot-de-4-ressorts-de-compression-acier-standers-diam-7-9-mm-l-70-x-ep-1-mm-e1401456374?queryredirect=a_fp_lot_de_4_ressorts_de_compression_acier__standers__diam_7_9_mm__l_70_x_ep_1_mm&numpage=1 1 ressort de compression longueur 70mm] * 1 rondelle * 1 petite vis * 2 rivets * 5 cm de fil de cuivre diamètre 2mm * 1 domino électricien diamètre 4mm * Materiel plomberie/gaz: ** 100mm de tube fileté laiton 15/21 ** 2 ecrous borgne laiton 15/21 ** 1 écrou débouchant laiton 15/21 ** 1 manchon cuivre diamètre 12mm ** 1 manchon cuivre diamètre 14mm ** 1 mamelon laiton 15/21 * [https://www.leroymerlin.fr/v3/p/produits/clapet-anti-retour-acier-equation-diam-100-mm-e42735?queryredirect=a_fp_clapet_anti_retour_acier_equation__diam_100_mm&numpage=1 1 clapet ventilation, ici diamètre 100mm] * [https://www.leroymerlin.fr/v3/p/produits/loqueteau-a-bille-laiton-hettich-l-16-x-l-11-mm-e22655 1 loqueteau à bille] * 1 tube alu ou inox à la longueur de la paroi du mur de l'habitat, diamètre du clapet '''facultatif:''' * Pare-pluie * Adhésif d'étanchéitéfacultatif:''' * Pare-pluie * Adhésif d'étanchéité)
    • Aquecedor solar versão ardosia  + (O tutorial apresentado aqui tem 2,09m x 1O tutorial apresentado aqui tem 2,09m x 1,09m inteiro. Sensor * Caibro (Aqui a seção final é 95mm x 45mm) ** 2 de 2m10 ** 2 de 2m10 *15m de ripas(20mm x 53mm) * Placa rígida (aqui compensado revestido, 10mm) * Placa isolante (aqui placa de Steico/lã de rocha, 22mm) * Selante/cola Sika * Silicone * Cola de poliuretano monocomponente para montagem em madeira exterior. * Cola de madeira * Pregos * Parafusos para madeira de 30mm à 150mm * Fita asfáltica autoadesiva * Óleo de linhaça * Verniz para madeira * 15m de ripas (30mm x 16 mm) * Fita adesiva em alumínio * Placa de vidro temperado ou policarbonato (1m x 2m) * Grelha metálica expandida (300 mm x 50 mm) * 4 Parafusos Prisioneiro Rosca Dupla([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de cantoneira de alumínio de 100mm de largura ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adesivo dupla face * isolante fino (aqui isolante de parquet/taco) * 30 a 35 placas de ardosia 320 mm x 220 mm, espessura 3,5 mm * 8 esquadros reforçados, mini largura 40mm * 1 tubo do diâmetro 100mm de largura da parede da residência, de PVC / alumínio / aço inoxidável para baixo de entrada Sistema de válvula: * 1 Cilindro termostático Vernet EL 0769 * Tubo de 100mm de diâmetro latão 4mm * 1 mola de compressão comprimento 70mm * 1 arruela * 1 parafuso pequeno * 2 rebites * 5 cm de diâmetro de fio de cobre 2mm * 1 conector elétrico barra de diâmetro 4mm * Encanamento / equipamento de gás: ** 100mm de tubo de latão roscado 15/21 ** 2 Porcas Sextavada Calota 15/21 ** 1 porca latão 15/21 ** 1 mandril de cobre com diâmetro de 12mm ** 1 mandril de cobre com diâmetro de 14mm ** 1 conector em rosca em latão 15/21 * * 1 válvula de ventilação, aqui diâmetro 100 milímetros * 1 Trava de porta/fecho * 1 tubo de alumínio ou aço inoxidável ao longo da parede da parede da casa, diâmetro da válvula. '' 'Opcional' '' * Capa de chuva * Selante'' 'Opcional' '' * Capa de chuva * Selante)
    • Rainwater harvesting  + (PVC pipes of different diameters, bends, junctions, T-shaped pipe a 50 liters container A ping-pong ball)
    • Solar air heater  + (The tutorial presented here is 2.09m x 1.0The tutorial presented here is 2.09m x 1.09m overall Sensor: * Chevron Douglas (here the final section is 95mm x 45mm) ** 2 of 2m10 ** 2 of 1m10 * 15 m of douglas sheets (20mm x 53mm) * Rigid plate (here plywood filmed, 10mm) * Rigid insulation (here Steico plate, 22mm) * Sika cartridge * Silicone cartridge * PU glue for outdoor wood gluing * Wood glue * Nails * Wood screws, from 30mm to 150mm * Comprehensive seal * Linseed oil * Wood varnish * 15 m of douglas sheets (30mm x 16 mm) * Aluminum adhesive * Tempered glass or polycarbonate plate (1m x 2m) * Expanded metal grid (300mm x 50mm) * 4 screw legs (example) * 1m of aluminum drip 100mm width (example) * Double-sided adhesive * Thin insulation (here parquet insulation) * 30 to 35 slates 320mm x 220mm, thickness 3,5mm * 8 reinforced squares, mini width 40mm * 1 tube diameter 100mm length of the housing wall, pvc / aluminum / stainless steel for the low entrance Valve system: * 1 Thermostatic cylinder Vernet EL 0769 * 100mm of brass tube diameter 4mm * compression spring length 70mm * 1 washer * 1 small screw * 2 rivets * 5 cm of copper wire diameter 2mm * 1 domino electrician diameter 4mm * Plumbing / gas equipment: ** 100mm of threaded brass tube 15/21 ** 2 brass blind nuts 15/21 ** 1 brass through nut 15/21 ** 1 copper sleeve diameter 12mm ** 1 copper sleeve diameter 14mm ** 1 brass nipple 15/21 * 1 ventilation valve, here diameter 100mm * 1 ball catch * 1 aluminum or stainless steel tube along the wall of the house wall, diameter of the valve '''optional:''' * Rain barrier * Sealant '''optional:''' * Rain barrier * Sealant)
    • Bomba manual (vertical)  + (Todas estas peças estão aqui em PVC para aTodas estas peças estão aqui em PVC para a bomba: * 3 adaptador 50mm-25mm * 2 encaixe 50mm * 1 T 50mm-25mm * 1 ou 2 cotovelo 25mm (de acordo com as necessidades para a saída de água) * entre 1 e 2 2 metros de tubo de 25mm (dependendo da necessidade da saída de água) * entre 1 e 2 metros tubo de 50mm * duas bolas com mais de 25mm de diâmetro (bolas de vidro) * 2 parafusos 50 mm de comprimento mínimo para o pistão: * entre 1 e 2 metros de tubo de 40mm * 1 T XXmm-40mm * 1 rolha de tubo de 40mm, se possível um pouco mais largo * stripper (tipo acetona)ouco mais largo * stripper (tipo acetona))
    • Bomba manual ( vertical)  + (Todas estas piezas están aquí en PVC paraTodas estas piezas están aquí en PVC para la bomba : *3 adaptadores 50mm-25mm *2 conexiones 50mm *1 T 50mm-25mm *1 o 2 codos de 25mm (dependiendo de las necesidades de salida de agua) *entre 1 y 2 metros de tubo de 25mm (dependiendo de las necesidades de salida de agua) *entre 1 y 2 metros de tubo de 50mm *dos bolas de más de 25 mm de diámetro (bolas de vidrio) *2 tornillos de al menos 50 mm de longitud para el pistón : *entre 1 y 2 metros de tubo de 40mm *1 T XXmm-40mm *1 tapón de tubo de 40 mm, si es posible un poco más ancho decapante (tipo acetona)n poco más ancho decapante (tipo acetona))
    • Pompe manuelle (verticale)  + (Toutes ces pièces sont ici en PVC pour laToutes ces pièces sont ici en PVC pour la pompe : * 3 adaptateur 50mm-25mm * 2 raccord 50mm * 1 T 50mm-25mm * 1 ou 2 coude 25mm (en fonction des besoins pour la sortie de l'eau) * entre 1 et 2 mètres de tube 25mm (en fonction des besoins pour la sortie de l'eau) * entre 1 et 2 mètres de tube 50mm * deux billes de plus de 25mm de diamètre (billes en verre) * 2 vis de 50 mm de long minimum pour le piston : * entre 1 et 2 mètres de tube 40mm * 1 T XXmm-40mm * 1 bouchon tube de 40mm, si possible un peu plus large * décapant (type acétone) peu plus large * décapant (type acétone))
    • Solar multicooker  + (• Polystyrene boards • Wood boards. • 8mm glass (size: 50cmX50cm) • Aluminium scotch or survival blanket ( silver side outwards ). • Pop-rivets. • Inner tube • Cords. • Screws.)
    • Dry Toilets For Family  + ("Notes" 1) Every measure in this tutorial"Notes" 1) Every measure in this tutorial are only for the stainless steel bucket below and for wood of a thickness of 1,2 in. It will be very simple to adapt the measure depending on the equipment of everyone. 2) It isn't recommended to use any other materials than stainless steel for the bucket. The other materials such as galvanized steel or plastic don't react well with urine through time. Furthermore, you have to make sure the bucket can support the weight of anybody. That's why stainless steel is recommended. * [http://ecotrone.fr/seaux-et-couvercles-inox_2_seau-15-l-sans-base__0901-15.html A stainless steel bucket]. * Classic toilet lid. * [https://lecopot.com/473-thickbox/seau-21l-en-plastique-alimentaire-toilette-seche.jpg A plastic bucket] * A door hinge 4 inches large, preferably stainless steel. * Wood boards/shavings, here 1,2 in thick. * Screws, preferably stainless steel. * Wood glue. * Polyurethane glue. * A lag-screw 4,8 in long. * Sawdust (can be collected at a carpenter). * Dry vegetable matters like straw, dead leaves, etc. * Container allowing to stock sawdust, approximately 20 L. (bucket, bag, etc) * Container allowing to collect the sawdust (small shovel, pot, tin can, etc) * Reclaimed wood or palettes (creation of the composting area).alettes (creation of the composting area).)
    • Ram pump  + ('''Do not use plastic material for the ram'''Do not use plastic material for the ram, whether valves or flaps, as they will wear out very quickly during operation..'''
      This is an example for the case of a ram pump dimensioned in 26/34mm, but it has to be adapted according to the results of the dimensioning (Step 2
      '''To buy:''' * Valve of 26/34mm * 1 Elbow of 26/34 * 3 Male plumbing nipples in 26/34 * 1 Tee of 26/34 * 1 Strainer in 26/34 or a plastic check valve inside (see step 5) * 1 Check valve in 26/34 with stainless steel/brass interior * 2 Valves in 20/27 or 1 valve with drain valve * 1 Cross of 20/27 * 1 Reduction from 26/34 to 20/27 * 1 or 2 Teflon rollers for sealing the entire assembly * Thread lock for fixing the threaded rod * 4 Rods with wing nuts * A dozen washers with an internal diameter of 6mm * 2 Nuts for M5 threaded rod '''To be recovered:''' * 1 Extinguisher of 7 or 9 litres * 1 Inner tube or other rubber to make a seal * Nails * 1 Wooden board * Flat iron 20 or 30 mm wide, about 60 cm * A torch (according to step 5)
      1 Wooden board * Flat iron 20 or 30 mm wide, about 60 cm * A torch (according to step 5))
    • Dominik - serveur modulable autoalimenté en réemploi  + ('''Pour la partie serveur :''' *Smartphon'''Pour la partie serveur :''' *Smartphone avec entrée carte SD *Carte SD (taille adaptée à vos besoins) *Une carte SIM et un forfait Internet '''Pour la partie auto-alimentation :''' *1 panneau solaire *1 régulateur solaire *1 batterie *1 allume-cigare USB *15m de câble (1,5mm²) *Scotch isolant *Cosses + dominos '''Pour la partie caisson de transport :''' *Une petite glacière (17 cm x 23 cm x 24 cm dans notre cas) *Planches de bois *Colle à bois *2 charnière *Plaque de plexiglass *Un passe câble *2 petites vis *Scotch double face *Super glue *Papier de verre *Scotch velcro *Une chambre à air *Une petite plaque d'acier
      re à air *Une petite plaque d'acier <br/>)
    • Dominik - serveur modulable autoalimenté en réemploi  + ('''Pour la partie serveur :''' *Smartphon'''Pour la partie serveur :''' *Smartphone avec entrée carte SD *Carte SD (taille adaptée à vos besoins) *Une carte SIM et un forfait Internet '''Pour la partie auto-alimentation :''' *1 panneau solaire *1 régulateur solaire *1 batterie *1 allume-cigare USB *15m de câble (1,5mm²) *Scotch isolant *Cosses + dominos '''Pour la partie caisson de transport :''' *Une petite glacière (17 cm x 23 cm x 24 cm dans notre cas) *Planches de bois *Colle à bois *2 charnière *Plaque de plexiglass *Un passe câble *2 petites vis *Scotch double face *Super glue *Papier de verre *Scotch velcro *Une chambre à air *Une petite plaque d'acier
      re à air *Une petite plaque d'acier <br/>)
    • Desert fridge  + ( * - 1 clay pot of 50 x 46 cm, preferably * - 1 clay pot of 50 x 46 cm, preferably round ( 50cm diameter ) *1 clay pot of 30 x 40 cm, preferably round ( 30cm diameter ) *About 45 kg of fine sand * About 15 litres of drinking water* *1 breathable fabric or cover Adaptability : The dimensions of the two jars vary according to the quantity of food you wish to be able to preserve. Here we propose to build a Zeer Pot that can contain 12 kg of food. This will require an outer pot 50 cm in diameter and an inner pot 30 cm in diameter. The size can be adapted according to the needs provided that the proportions are respected. Health precautions : Attention : *Using contaminated water could contaminate the food deposited in the inner pot. The same will apply if the sand contains harmful elements such as hydrocarbons. ains harmful elements such as hydrocarbons. )
    • Spirulina-growing pond  + ( * 50 to 100 mm long wood screws * 18mm lath * Half-rafter * Leveling feet * Geotextile * Waterproof tarpaulin * Staples * Greenhouse tarpaulin or food film * Polycarbonate plate 3x1 m * Cardboards * Silicone )
    • Phytoépuration eaux usées  + ( * Gravier (granulométrie 12/20 ou 20/40mm * Gravier (granulométrie 12/20 ou 20/40mm) * Gravillons (granulométrie 4/8, 4/12 ou 6/10 mm) * Sable siliceux lavé (granulométrie 0/4 mm) * Géotextile anti-poinçonnant * Bâche EPDM * Tuyaux PVC * 2 raccords T PVC * Drains * Colle PVC * Deux regards * Deux vannes * Deux passe-parois x regards * Deux vannes * Deux passe-parois )
    • Phytoépuration eaux usées  + ( * Gravier (granulométrie 12/20 ou 20/40mm * Gravier (granulométrie 12/20 ou 20/40mm) * Gravillons (granulométrie 4/8, 4/12 ou 6/10 mm) * Sable siliceux lavé (granulométrie 0/4 mm) * Géotextile anti-poinçonnant * Bâche EPDM * Tuyaux PVC * 2 raccords T PVC * Drains * Colle PVC * Deux regards * Deux vannes * Deux passe-parois x regards * Deux vannes * Deux passe-parois )
    • Bio-sand filter for drinking water  + ( * One meter of PVC pipe for drinking wate * One meter of PVC pipe for drinking water adduction, 100mm diameter. * One PVC plug, adapted to the pipe. * One cover * PVC glue. * Sand, if possible from crushed stones, diameter 0-1mm, in order to fill 60 of the pipe. * Gravel zone, 6-10 mm, in order to fill 10cm of the pipe. * Flexible plastic pipe intented for food. * 3 bends, adapted to the flexible pipe. * Silicone s, adapted to the flexible pipe. * Silicone )
    • Bassin de culture de spiruline  + ( * Vis à bois de 50 à 100 mm de long * Volige 18 mm * Demi-chevron * Pieds de nivellement * Géotextile * Bâche étanche * Agrafes * Bâche de serre ou film alimentaire * Plaque de polycarbonate de 3x1 m * Cartons * Silicone )
    • Plastic pyrolyzer  + ( *1 large stainless steel tank with lid *3 small stainless steel tanks *copper pipes (diameter 6mm) *7 copper uniseal joint (for watertightness of joints) *O-ring (for watertightness of tanks) *Plastic waste PP and/or HDPE/LDPE )
    • Dominik - module de mobilité  + ( *Une petite glacière (17 cm x 23 cm x 24 *Une petite glacière (17 cm x 23 cm x 24 cm dans notre cas) *Planches de bois *Colle à bois *2 charnière *Plaque de plexiglass *Un passe câble *2 petites vis *Scotch double face *Super glue *Papier de verre *Scotch velcro *Une chambre à air *Une petite plaque d'acier ne chambre à air *Une petite plaque d'acier )
    • Extracteur de jus de pomme  + ( *Vis 60mm x15 et 40mm x 50 *Boulons x 10 *Vis 60mm x15 et 40mm x 50 *Boulons x 10 *Tige filetée 200mm
      *Caisse en bois (très spécifique de notre machine, pouvant être refait en bois) *Planches de bois (exemple aggloméré ou autre planche de bois plates et longue) *Planches de bois (provenant de palettes)
      *Cric de voiture (provenant d'une carcasse de voiture) *Vieux t-shirts *Bac gastronomique *Pédale de vélo
      ieux t-shirts *Bac gastronomique *Pédale de vélo <br/> )
    • Preservation module  + ( *Wood boards *Threaded steel rods *Nuts *Clay pots (2 different sizes) *Moskito net *Tarp *Sand )
    • Wicking Bed  + (1 cuve plastique type MAUVILAC 2 tuyaux P1 cuve plastique type MAUVILAC 2 tuyaux PVC plomberie + 1 coude + 1 bouchon PVC: diamètre 40mm 8 tasseaux: 110cms x 4cms 40 planches de bois environ: H: 30cm / L: 10cm 32 vis perforantes métal 80 vis à bois 2 colliers de fixation Un bout de tuyau d'arrosage: longueur 10 cms, diamètre 10 à 20mm 4 parpaings 30 à 40 litres de scories 1 carré géotextile de la dimension du fond du bac + rebord 10cms: 130cm x 130cm 100 litres de terre environ.30cm x 130cm 100 litres de terre environ.)
    • Hydroponics  + (1. Crop gutters * Cleats (minimum width 11. Crop gutters * Cleats (minimum width 10cm) * Plastic sheeting * Staples * Clay beads
      Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots
      * Brackets * Wood screws * Young shoots and cuttings 2. Irrigation system * 1 Submersible pump (aquarium pump) * 5 m of thin plastic pipe (pump outlet) * 1 End cap with 4 outlets for fine pipe * 50 cm of wide plastic tube (Link between the filter and the bio-filter) * 1 Wide pipe end cap (to be fixed on the filter tank) * 1 Blower 3. Filter and bio-filter * 2 plastic bins of 60L * Large gravel * Sand * 10L Clay beads * 40L of water [[:Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation.]] 4. Control system * Socket outlet with programmable timer or Arduino
      [[:Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation.]] 4. Control system * Socket outlet with programmable timer or Arduino)
    • fulu to etumbelo za moyi  + (<div class="mw-translate-fuzzy"> boi
      boite: *9 plaques pe ya contre plaques ya 500x500mm et epaisseur ya 10mm(munene makasi te po caisse ezala kilo mingi te) isolant ya 40mm ya epaisseur (4 palques ya 500x500mm):polysterenes,(kozua yango na batu ba tekaka mpisi /to na ba magasin ya electromenager),liege ya plaque,vermiculite... *4 metres ya ba baguettes ya munene moko na isolant *papier aliminuim *visserie pona visse 4x40(environ 80) *sete 1,5x25mm (environ 10) vitre,ndaku to cadre pe ba toyi: *vitre ya 410x470mm,ya munene mingi te 2 a 3mm(nazua yango na fulu ya ba menusier ya ba vitre *panneau agglomere ya epaiseur moko na vitre ,moko ya 500x500mm pe mususu ya 500x500mm *palette/libaya (8 planches ya 500x60mm pe ya epaisseur mingi te (20mm) *1metre de charniere fine na ba vis na mutu ya plates ou 6 charniere *3 metres ya singa (4mm de diametre)ya joint
      *9 plaques de contre plaqué de 500x500 mm et d’épaisseur d’environ 10 mm (pas trop épais pour que la caisse ne soit pas trop lourde) Isolant d’environ 40 mm d’épaisseur (4 plaques de 500x500 mm) : polystyrènes, (récupérable chez le poissonnier / en fin de marché ou dans un magasin d'électroménager), liège en plaque, vermiculite … *4 mètres de baguettes de la même épaisseur que l’isolant *Papier aluminium ou adhésif miroir (plus chère) *Visserie 4x40 (environ 80) *Clous 1,5 x25 mm (environ 10) Vitre, cadre et oreilles : *Vitre de 410x470 mm, pas trop épaisse 2 à 3mm (récupérable dans la poubelle d’un menuisier pose de vitre) *Panneau aggloméré de la même épaisseur que la vitre, une de 500x500 mm et une autre de 500X550 mm *Palette / Planches de bois (8 planches d’environ 500x60 mm et pas trop épaisse (environ 20 mm) *1 mètre de charnière fine avec des vis à têtes plates OU 6 charnières. *3 mètres de cordelettes (4 mm de diamètre) joint
      es. *3 mètres de cordelettes (4 mm de diamètre) joint)
    • Ηλιακός φούρνος  + (<div class="mw-translate-fuzzy"> Για
      Για το κουτί: * 9 κομμάτια κόντρα πλακέ διάστασης 500x500mm και γύρω στα 10mm πάχος (όχι υπερβολικά χοντρό για να μη βαρύνει πολύ ο φούρνος) * Μονωτικό υλικό πάχους περίπου 40mm (4 κομμάτια των 500x500mm): φελιζόλ (μπορείτε να βρείτε σε ψαράδικα στο κλείσιμο της αγοράς ή σε μαγαζιά με οικοδομικά υλικά), φύλλο φελλού, βερμικουλίτης... * Ραβδί/Πηχάκι μήκους 4 μέτρων (στο ίδιο πάχος με το μονωτικό υλικό) * Αλουμινόχαρτο ή μαύρη ταινία (πιο ακριβή) * Βίδες 4x40 (περίπου 80) * Καρφιά 1,5x25mm (περίπου 10) Γυαλί, κάδρο και αυτιά: * Γυαλί διαστάσεων 410x470mm, όχι υπερβολικά χοντρό, 2 με 3mm (Μπορείτε να βρείτε από τα υπόλοιπα ξυλουργών) * Νοβοπάν (τσιπμπορντ/ μοριοσανίδα) στο ίδιο πάχος με το γυαλί, και ένα κομμάτι διάστασης 500x500mm κι ένα άλλο 500x550mm * Ξύλινες σανίδες (8 σανίδες περίπου 500x60mm και όχι υπερβολικά χοντρές (περίπου 20mm)) * 1 μέτρο λεπτού μεντεσέ ή 6 μεντεσέδες και τις αντίστοιχες βίδες με επίπεδη κεφαλή * 3 μέτρα κορδόνι (4mm διάμετρος) * Ταινία στεγανοποίησης
      *9 plaques de contre plaqué de 500x500 mm et d’épaisseur d’environ 10 mm (pas trop épais pour que la caisse ne soit pas trop lourde) Isolant d’environ 40 mm d’épaisseur (4 plaques de 500x500 mm) : polystyrènes, (récupérable chez le poissonnier / en fin de marché ou dans un magasin d'électroménager), liège en plaque, vermiculite … *4 mètres de baguettes de la même épaisseur que l’isolant *Papier aluminium ou adhésif miroir (plus chère) *Visserie 4x40 (environ 80) *Clous 1,5 x25 mm (environ 10) Vitre, cadre et oreilles : *Vitre de 410x470 mm, pas trop épaisse 2 à 3mm (récupérable dans la poubelle d’un menuisier pose de vitre) *Panneau aggloméré de la même épaisseur que la vitre, une de 500x500 mm et une autre de 500X550 mm *Palette / Planches de bois (8 planches d’environ 500x60 mm et pas trop épaisse (environ 20 mm) *1 mètre de charnière fine avec des vis à têtes plates OU 6 charnières. *3 mètres de cordelettes (4 mm de diamètre) joint
      es. *3 mètres de cordelettes (4 mm de diamètre) joint)
    • Mooli-Benne  + (Benne: * 1 Tôle Acier 1100/1700/3mm * 2 TBenne: * 1 Tôle Acier 1100/1700/3mm * 2 Tôle Acier 450/1700/3mm * 2 Tôles Acier 600/1300/3mm * 16 Équerres Acier 30/30/3mm * 8 Tubes carré Acier 40mm * 4 Tubes carré Acier 50mm * 3 Fer U Acier 40/35/3mm * 2 Fer U Acier 40/30/3mm * 3 Fer U Acier 60/50/3mm * 4 Fers plats Acier 30/3mm * Fers à béton Ø10mm * 4 Tôles Acier 100/100/8mm * 1 Tôle Acier 100/100/6mm * 1 Tôle Acier 400/400/5mm * 4 Écrous M12 * 4 Boulons M12 x65mm Cadre: * 4 Équerres Acier 60/60/3mm * 2 Barres Acier Ø20mm * 2 Blocs Acier 35/35/80mm * 2 Tubes Acier Ø30mm * 4 Blocs Acier 150/60/10mm * 1 Barre Acier Ø60mm * 4 Goupilles Ø5x30mm * 4 Rondelles Ø50x3mm Charrette traction asine: * 10 Équerres Acier 50/50/3mm * 1 Fer carré Acier 35mm * 4 Tubes Acier Ø34mm * 4 Planches Bois 1700/300/50mm * Fers à béton Ø12mm * 2 Tôle Acier 300/300/2,5mm * 16 Écrous M12 * 16 Boulons M12 x65mm * 2 Roues 155 70 R13 75T MS Manivelles: * 1 Tube carré Acier 40mm * 1 Tube carré Acier 25mm * 2 Barres Acier Ø20mm Assemblage: * 10 Écrous M12 * 10 Boulons M12 x65mme: * 10 Écrous M12 * 10 Boulons M12 x65mm)
    • Installation Biogaz autoconstruite  + (Ferraille + Moellons Ciment Mélange béton Regards Isolation Bache EPDM Profilé-Seeger Enduit étanche 2 Poubelles plastiques de 100L bois de coffrage Tubes PVC tuyaux de jardinage Pompe)
    • Installation Biogaz autoconstruite  + (Ferraille + Moellons Ciment Mélange béton Regards Isolation Bache EPDM Profilé-Seeger Enduit étanche 2 Poubelles plastiques de 100L bois de coffrage Tubes PVC tuyaux de jardinage Pompe)
    • Worm Compost Bins  + (Large plastic or iron container with lid, Large plastic or iron container with lid, 100 – 200 l Stainless ball or butterfly valvetap (1/2” inch or 3/4” inch) with hydraulic fittings Teflon Rocks, peppels, gravel, or expanded clay balls Sand. Not salty sand from sea! Good loamy soil to 30/40 cm height Cow or horses manure, several big handfuls, broken up Kitchen wastes, a bit. To be added to the system after 10 days Worms (100/ 200, depending on the dimension of the barrel). Better the red worm, they are more active and efficient, even if not local! Dry leaves or straw 2/3 ventilation filter in plastic of 10/12 cm diameter [ Mosquito net can be used instead of the ventilation filters.] silicon Bricks or other material 2 old big T-shit Non-woven blanketrial 2 old big T-shit Non-woven blanket)
    • Chauffage solaire version ardoise  + (Le tutoriel présenté ici fait 2,09m x 1,09Le tutoriel présenté ici fait 2,09m x 1,09m hors tout '''Capteur:''' * Chevron en douglas (Ici la section finale est de 95mm x 45mm) ** 2 de 2m10 ** 2 de 1m10 * 15 m de Liteaux en douglas (20mm x 53mm) * Plaque rigide (ici contreplaqué filmé, 10mm) * Isolant rigide (ici plaque de Steico, 22mm) * Cartouche de sika * Cartouche silicone * Colle PU pour collage bois extérieur * Colle à bois * Clous * Vis à bois, de 30mm à 150mm * Joint compribande * Huile de lin * Vernis bois * 15 m de Liteaux en douglas (30mm x 16 mm) * Adhésif aluminium * Vitre trempé ou plaque polycarbonate (1m x 2m) * Grille en métal déployé (300mm x 50mm) * 4 pattes à vis ([https://plomberie.fr/products/goujon-double-filet-8x60-vendu-a-l-unite exemple]) * 1m de larmier aluminium de largeur 100mm ([http://www.homehardware.ca/fr/rec/index.htm/Materiaux-de-construction/Materiaux-Construct/Parement-Acc/Aluminium/Moulures/Larmier-en-aluminium-de-12-pi-brun-commercial/_/N-nti04Z2ppu/R-I2752269 exemple]) * Adhésif double face * Isolant mince (ici isolant de parquet) * 30 à 35 ardoises 320mm x 220mm, épaisseur 3,5mm * 8 équerres renforcées, largeur mini 40mm * 1 tube diamètre 100mm longueur de la paroi de l'habitat, pvc/alu/inox pour l'entrée basse '''Système clapet:''' * [https://www.lextronic.fr/actionneurs-electriques/28536-verin-thermostatique.html 1 Vérin thermostatique Vernet EL 0769] * 100mm de tube laiton diamètre 4mm * [https://www.leroymerlin.fr/v3/p/produits/lot-de-4-ressorts-de-compression-acier-standers-diam-7-9-mm-l-70-x-ep-1-mm-e1401456374?queryredirect=a_fp_lot_de_4_ressorts_de_compression_acier__standers__diam_7_9_mm__l_70_x_ep_1_mm&numpage=1 1 ressort de compression longueur 70mm] * 1 rondelle * 1 petite vis * 2 rivets * 5 cm de fil de cuivre diamètre 2mm * 1 domino électricien diamètre 4mm * Materiel plomberie/gaz: ** 100mm de tube fileté laiton 15/21 ** 2 ecrous borgne laiton 15/21 ** 1 écrou débouchant laiton 15/21 ** 1 manchon cuivre diamètre 12mm ** 1 manchon cuivre diamètre 14mm ** 1 mamelon laiton 15/21 * [https://www.leroymerlin.fr/v3/p/produits/clapet-anti-retour-acier-equation-diam-100-mm-e42735?queryredirect=a_fp_clapet_anti_retour_acier_equation__diam_100_mm&numpage=1 1 clapet ventilation, ici diamètre 100mm] * [https://www.leroymerlin.fr/v3/p/produits/loqueteau-a-bille-laiton-hettich-l-16-x-l-11-mm-e22655 1 loqueteau à bille] * 1 tube alu ou inox à la longueur de la paroi du mur de l'habitat, diamètre du clapet '''facultatif:''' * Pare-pluie * Adhésif d'étanchéitéfacultatif:''' * Pare-pluie * Adhésif d'étanchéité)
    • Solar Oven (box-type oven)  + (The box: * 9 plywood panels of 500x500mm The box: * 9 plywood panels of 500x500mm and around 10mm of thickness (not too thick to not overweight the box) * Isolator of around 40mm of thickness (4 panels of 500x500mm): polystyrene (available at the fishmonger/ at the and of the market or in electric shop), cork panel, vermiculite... * 4 meters of stick (same thickness of the isolator) * Aluminium paper or black tape (more expensive) * Casing assembly 4x40 (around 80) * Nails 1,5x25mm (around 10) Glass, cadre and ears: * Glass of 410x470mm, not too thick, 2 to 3mm (available in carpenters' trashes) * Chipboard panel of the same thickness of the winder, one of 500x500mm and another one of 500x550mm * Wood pallet or wooden board (8 boards of around 500x60mm and not to thick (around 20mm) * 1 meter of thin hinge with flat head screws OR 6 hinges * 3 meters of string (4mm of diameter) * Sealmeters of string (4mm of diameter) * Seal)
    • Black Soldier Fly breeding  + (The materials used will depend on the suppThe materials used will depend on the support used to build the living space of your larvae. This can be done in a wooden box, a drum cut in half, a large plastic box...
      For the boat, we chose a wooden box because we had recovery boards
      For an order of size, our box will allow to treat waste (food and from dry toilets) produced by 3 persons. For the box (120/65/30cm):
      *120/65cm x2 wood boards *120/30cm x2 wood boards *65/30cm x2 wood boards *Iron angles *Hinges *Screw *Paint and varnish *Plastic tray of 100/60/15cm *Plank and pieces of wood to make the ramp *Inner tube *Staples *Plastic box to collect larvae
      For the aviary (80/50/45cm): * Wood bars of 80/5/2cm x4 * Wood bars of 41/5/2cm x2 * Wood bars of 40/5/2cm x2 *50/45cm plywood board (for the bottom) *Hinges *Screw *Angles *Mosquito net *50/10cm board (for opening) For pupae and egg laying: *Cardboard or wooden plates separated by pins *A box to put some waste *A box to put the pupae *Dry substrate (coconut fiber...) *A box for the hydration of flies
      Don't forget to protect the living space from the water. The eggs will burst with water!
      b-o"></i></div> <div class="icon-instructions-text">Don't forget to protect the living space from the water. The eggs will burst with water!</div> </div>)
    • Pompe manuelle (verticale)  + (Toutes ces pièces sont ici en PVC pour laToutes ces pièces sont ici en PVC pour la pompe : * 3 adaptateur 50mm-25mm * 2 raccord 50mm * 1 T 50mm-25mm * 1 ou 2 coude 25mm (en fonction des besoins pour la sortie de l'eau) * entre 1 et 2 mètres de tube 25mm (en fonction des besoins pour la sortie de l'eau) * entre 1 et 2 mètres de tube 50mm * deux billes de plus de 25mm de diamètre (billes en verre) * 2 vis de 50 mm de long minimum pour le piston : * entre 1 et 2 mètres de tube 40mm * 1 T XXmm-40mm * 1 bouchon tube de 40mm, si possible un peu plus large * décapant (type acétone) peu plus large * décapant (type acétone))
    • 太阳能烤炉 (箱式烤炉)  + (箱体: * 胶合板,9块,尺寸为500x500mm,厚度约为10mm(过厚的板材这箱体: * 胶合板,9块,尺寸为500x500mm,厚度约为10mm(过厚的板材这样会使箱体过重) 绝缘隔热层,4块,尺寸为500x500mm,厚度约为40mm,常见的绝缘隔热层为:聚苯乙烯(可通过在鱼贩、市场、电商处购买获得)、软木板、蛭石等 * 木条,长度为4m,厚度与绝缘隔热层一致 *锡纸或黑色胶带(价格较高) * 螺丝钉,尺寸为4x40mm,约80个 * 钉子,约10个,尺寸为1.5 x25mm 玻璃、框架及聚热装置: *玻璃,尺寸为410x470mm,厚度为2~3mm,不能过厚(可以用木匠的边角料) * 刨花板,2块,尺寸分别为500x500mm和500x550mm,厚度和绕线机一致 * 木板,8块,尺寸约为500x60mm,厚度约为20mm,不能过厚 * 有平头螺丝钉的薄铰链,长度为1m(或者铰链,6个) * 细绳,长度为3m,直径为4mm 密封条的薄铰链,长度为1m(或者铰链,6个) * 细绳,长度为3m,直径为4mm 密封条)