| Ligne 61 : | Ligne 61 : | ||
|Step_Picture_00=Multi_cuiseur_Solaire_IMG_0766.JPG | |Step_Picture_00=Multi_cuiseur_Solaire_IMG_0766.JPG | ||
|Step_Picture_01=Multi_cuiseur_Solaire_IMG_8640.JPG | |Step_Picture_01=Multi_cuiseur_Solaire_IMG_8640.JPG | ||
| − | |Step_Title= | + | |Step_Title=Attach the reflective panels. |
|Step_Content=The use or the air chamber for the hinges enables a stable footing and a proper tension. The cords will help to maintain the panels to 90° in relation to sunlight. They fix also the panels to the chassis one closed. | |Step_Content=The use or the air chamber for the hinges enables a stable footing and a proper tension. The cords will help to maintain the panels to 90° in relation to sunlight. They fix also the panels to the chassis one closed. | ||
}} | }} | ||
Version du 12 juin 2018 à 13:50
Difficulté
Facile
Durée
8 heure(s)
Coût
30 EUR (€)
Description
Solar oven + Heat saving slow cooker+ dryer.
Sommaire
Sommaire
- 1 Description
- 2 Sommaire
- 3 Introduction
- 4 Étape 1 - Build the polystyrene structure.
- 5 Étape 2 - Cover the inside with aluminium or survival blanket (silver side up)
- 6 Étape 3 - Build the wood structure.
- 7 Étape 4 - Attach the reflective panels.
- 8 Étape 5 - Creation of the oven door.
- 9 Étape 6 - Cooking.
- 10 Étape 7 - Creation of the dryer.
- 11 Commentaires
Introduction
This module combines different low-tech technologies. The solar oven traps the sun's rays and concentrates them behind a glass window to increased the temperature in the cooking chamber. If the insulation of the oven is thick enough, the cooking will continue even with the panels closed. When the oven is hot, if the door is open, the hot environment is perfect for drying fruit because they are protected from the direct sunlight.
Ps : A »The closed box can be used as a cooler.
Matériaux
• Polystyrene boards • Wood boards. • 8mm glass (size: 50cmX50cm) • Aluminium scotch or survival blanket ( silver side outwards ). • Pop-rivets. • Inner tube • Cords. • Screws.
Outils
• Cutter • Saw • Screw driver • Riveting machine
Étape 1 - Build the polystyrene structure.
Étape 2 - Cover the inside with aluminium or survival blanket (silver side up)
Étape 3 - Build the wood structure.
Étape 4 - Attach the reflective panels.
The use or the air chamber for the hinges enables a stable footing and a proper tension. The cords will help to maintain the panels to 90° in relation to sunlight. They fix also the panels to the chassis one closed.
Étape 5 - Creation of the oven door.
The door is also isolated to minimize to the maximum the thermal bridges.
Étape 6 - Cooking.
Once hermeically sealing, the indoor temperature can exceed 90°C. The cooking tray hels by absorbing the sunlights. This oven is designed to receive and warm eight normal water bootles of 1,5L.
Étape 7 - Creation of the dryer.
Shielded from the light with a ventilation grill.
Published
Français
English
Deutsch
Español
Italiano
Português