(Page créée avec « *Fill the empty space with soil mortar up to the height of the oven edges. Leave empty spaces at the combustion chamber and inside the molded space for the secondary burne... ») |
|||
(18 révisions intermédiaires par 3 utilisateurs non affichées) | |||
Ligne 2 : | Ligne 2 : | ||
|Main_Picture=Cuisini_re_am_lior_e_-_Mod_le_Patsari_Patsari_Ladrillo__0.jpg | |Main_Picture=Cuisini_re_am_lior_e_-_Mod_le_Patsari_Patsari_Ladrillo__0.jpg | ||
|Licences=Attribution (CC BY) | |Licences=Attribution (CC BY) | ||
− | |Description= | + | |Description=Patsari is a wood-saving stove which was developed in Mexico by the organisation GIRA (Interdisciplinary Group of Rural-Appropriate Technology) during the 2000s. Easy to build, low-cost and safe with regards to its impact on human health, the Patsari has since been rolled out to many different rural communities across Mexico. |
|Area=Habitat, Food, Energy | |Area=Habitat, Food, Energy | ||
|Type=Tutorial | |Type=Tutorial | ||
Ligne 10 : | Ligne 10 : | ||
|Cost=70 | |Cost=70 | ||
|Currency=EUR (€) | |Currency=EUR (€) | ||
− | |Tags=cuisinière améliorée, Mexique, économie, cuisinière, cuisine, NomadeDesMers, estufa, cooking stove | + | |Tags=cuisinière améliorée, Mexique, économie, cuisinière, cuisine, NomadeDesMers, estufa, cooking stove, patsari |
}} | }} | ||
{{Introduction | {{Introduction | ||
|Introduction=The [http://patsari.blogspot.com/p/fotos-y-dibujos.html Patsari stove] adapted and improved upon the [https://appropedia.org/Rocket_Lorena_Stove Lorena model] which was developed in Guatemala and Mexico in the 1980s. It was designed and distributed by the Grupo Interdisciplinario de Tecnología Rural Apropriada ([https://giraac.wordpress.com/ GIRA]) located in Patzcuaro, Michoacan, Mexico. During 20 years of fieldwork in collaboration with users of the Lorena design, several improvements have been incorporated into the Patsari model: | |Introduction=The [http://patsari.blogspot.com/p/fotos-y-dibujos.html Patsari stove] adapted and improved upon the [https://appropedia.org/Rocket_Lorena_Stove Lorena model] which was developed in Guatemala and Mexico in the 1980s. It was designed and distributed by the Grupo Interdisciplinario de Tecnología Rural Apropriada ([https://giraac.wordpress.com/ GIRA]) located in Patzcuaro, Michoacan, Mexico. During 20 years of fieldwork in collaboration with users of the Lorena design, several improvements have been incorporated into the Patsari model: | ||
− | * | + | *To increase its lifespan, the exterior is made of brick |
− | * | + | *For better standardization, the construction process uses molds to ensure the correct dimensions of the combustion chamber |
*An optimized combustion chamber | *An optimized combustion chamber | ||
*Secondary burners that maximize heat transfer to multiple cooking surfaces | *Secondary burners that maximize heat transfer to multiple cooking surfaces | ||
Ligne 173 : | Ligne 173 : | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
− | |Step_Title= | + | |Step_Title=Smoke Venting Passage |
− | |Step_Content=* | + | |Step_Content=*Use a trowel to dig a passage in the mortar for free access to the smoke venting tunnels and create a circuit between the combustion chamber and the two secondary hotplates. |
− | * | + | *Make sure to leave a 2cm tall passage between the hotplate and the dent created in the secondary chambers. |
− | * | + | *Dig a passage between the secondary chambers and the base of the chimney flue. |
|Step_Picture_00=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-48.JPG | |Step_Picture_00=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-48.JPG | ||
|Step_Picture_01=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-49.JPG | |Step_Picture_01=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-49.JPG | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
− | |Step_Title= | + | |Step_Title=Installing the Hotplates |
− | |Step_Content=* | + | |Step_Content=*Position the 3 hotplates in their locations. |
− | {{Idea| | + | {{Idea|To ensure that the hotplates are placed flat and level with the edges, you can hammer a piece of wood placed flat between the borders. Repeat the action at different positions.}} |
|Step_Picture_00=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-50.JPG | |Step_Picture_00=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-50.JPG | ||
|Step_Picture_01=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-52.JPG | |Step_Picture_01=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-52.JPG | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
− | |Step_Title= | + | |Step_Title=Finishing Touches and Installing the Chimney |
− | |Step_Content=* | + | |Step_Content=*Create a nice, smooth surface by moistening it a little and smoothing with the trowel. |
− | * | + | *Carefully remove the formwork around the cooker. |
− | * | + | *If necessary, scrape down and smooth the edges of the cooker for a better finish. |
− | * | + | *Insert the tubes in the smoke venting ducts to form the chimney flue. |
− | * | + | *The stove takes about a week to dry completely. |
|Step_Picture_00=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-52.JPG | |Step_Picture_00=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-52.JPG | ||
|Step_Picture_01=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-54.JPG | |Step_Picture_01=Cuisini_re_am_lior_e_-_Mod_le_Patsari_449px-Patsari-54.JPG | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
− | |Step_Title=Recommendations | + | |Step_Title=Recommendations for Use |
− | |Step_Content=* | + | |Step_Content=*Distribute the wood evenly at the entrance of the combustion chamber for a more even temperature under the main hotplate. |
− | + | About once a week: | |
− | * | + | *Clean the ash from the combustion chamber. |
− | * | + | *Clean the smoke venting tunnels. |
− | * | + | *Clean the chimney flue. |
}} | }} | ||
{{Notes | {{Notes | ||
− | |Notes=* | + | |Notes=*Estufa Patsari Construction Manual in Spanish: http://www.stoves.bioenergylists.org/files/ManualPatsari.pdf |
− | * | + | *Helpful video tutorials for construction: https://www.youtube.com/watch?v=ecqqWO5hqKs and https://www.youtube.com/watch?v=MohCoH5ODkI |
− | * | + | *Construction plans for the Estufa Patsari: http://bioenergylists.org/files/NuevaEstufaPatsari_GIRA.pdf |
− | * | + | *Estufa Patsari performance study (Spanish): http://ecotec.cieco.unam.mx/Ecotec/wp-content/uploads/From-cookstoves-to-cooking-systems.-The-integrated-program-on-sustainable-household-energy-use-in-Mexico.pdf |
− | * | + | *Construction tutorial for the Estufa Lorena (old model) in Spanish: https://www.crim.unam.mx/patrimoniobiocultural/sites/default/files/PL6.pdf |
− | * | + | *Study on the improvement of the Estufa Lorena to the Estufa Patsari: http://www.bioenergylists.org/estufasdoc/Rodolfo_Diaz/DeLorena-a-Patsari.pdf |
+ | *English translation by Bailey Bishop & Simon Conheady | ||
}} | }} | ||
{{PageLang | {{PageLang |
Tutorial de Low-tech Lab | Catégories : Habitat, Alimentation, Énergie
Patsari is a wood-saving stove which was developed in Mexico by the organisation GIRA (Interdisciplinary Group of Rural-Appropriate Technology) during the 2000s. Easy to build, low-cost and safe with regards to its impact on human health, the Patsari has since been rolled out to many different rural communities across Mexico.
Patsari is a wood-saving stove which was developed in Mexico by the organisation GIRA (Interdisciplinary Group of Rural-Appropriate Technology) during the 2000s. Easy to build, low-cost and safe with regards to its impact on human health, the Patsari has since been rolled out to many different rural communities across Mexico.
cuisinière améliorée, Mexique, économie, cuisinière, cuisine, NomadeDesMers, estufa, cooking stove, patsari
The Patsari stove adapted and improved upon the Lorena model which was developed in Guatemala and Mexico in the 1980s. It was designed and distributed by the Grupo Interdisciplinario de Tecnología Rural Apropriada (GIRA) located in Patzcuaro, Michoacan, Mexico. During 20 years of fieldwork in collaboration with users of the Lorena design, several improvements have been incorporated into the Patsari model:
In the Purhe'pecha indigenous peoples' language, Patsari means "the one who takes care of;" the stove is designed to take care of the health of the users as well as the overall environment. The main advantages of this cooker are:
Youtube
-
-
Before constructing the Patsari stove, you need a solid, stable base, not only for greater comfort for the user, but also for the sake of safety around children and pets. In general, the base measures 1m wide by 1.20m long and 60cm high; these measurements ensure sufficient space for placing kitchen utensils, for example.
Construction Materials
The base can be constucted with available household materials or other materials that are easily affordable. Some examples of potential materials are:
These bases can be filled in completely or hollow. The hollow base has more advantages, because it can be used to store and dry wood, or for storing dishes.
If the stove is to be built in a corner of the house or near a wall, leave a gap (about 5cm) for the pieces of the formwork to be removed.
This mixture will be used to bond the bricks.
2. Making the clay mortar
This mixture will be used for filling the interior of the cooker.
About once a week:
en fr 1 Published
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #