
Vos dernières discussions
- 08:46, 24 June 2020 (diff | hist) . . (+77) . . PC low-tech avec un Raspberry PI
- 08:43, 24 June 2020 (diff | hist) . . (+1,979) . . PC low-tech avec un Raspberry PI
- 21:48, 23 June 2020 (diff | hist) . . (+408) . . PC low-tech avec un Raspberry PI
- 21:42, 23 June 2020 (diff | hist) . . (+4,998) . . N PC low-tech avec un Raspberry PI (Page créée avec « {{Tuto Details |Main_Picture=PC_low-tech_avec_un_Raspberry_PI_IMG_20200623_1050574.jpg |Main_Picture_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.... »)
- 09:46, 19 February 2018 (diff | hist) . . (-52) . . L'éolienne
- 09:44, 19 February 2018 (diff | hist) . . (+1,164) . . L'éolienne
- 21:58, 11 February 2018 (diff | hist) . . (-1) . . L'éolienne/en
- 21:58, 11 February 2018 (diff | hist) . . (-1) . . L'éolienne/en
- 21:57, 11 February 2018 (diff | hist) . . (-1) . . L'éolienne/en
- 13:54, 9 February 2018 (diff | hist) . . (-35) . . L'éolienne/en (Page créée avec « Feel free to comment, share, and enhance the tutorial useful informations. »)
- 13:54, 9 February 2018 (diff | hist) . . (-35) . . L'éolienne/en (Page créée avec « Connect a mobile phone or other device with a USB connection to the electrical circuit and let it charge for a few hours. In average wind, count 5 hours of charge for a ph... »)
- 13:53, 9 February 2018 (diff | hist) . . (-8) . . L'éolienne/en (Page créée avec « Use »)
- 13:52, 9 February 2018 (diff | hist) . . (-7) . . L'éolienne/en (Page créée avec « Cover the engine and the electrical circuit with the bike inner tube: this will protect them from rain or spray. '' (picture 14) '' »)
- 13:52, 9 February 2018 (diff | hist) . . (-4) . . L'éolienne/en (Page créée avec « Motor protection »)
- 13:52, 9 February 2018 (diff | hist) . . (-34) . . L'éolienne/en (Page créée avec « Your circuit is ready to run you can connect a phone, provided there is wind of course. '' (image 13) '' »)
- 13:51, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « 2 - Solder the red wire with the regulator output and the black wire with the controller common. '' (picture 12) '' »)
- 13:51, 9 February 2018 (diff | hist) . . (-9) . . L'éolienne/en (Page créée avec « 1 - Solder a red wire to the positive terminal and a black wire to the negative terminal. These will be the output wires of your wind turbine, to which you can connect a b... »)
- 13:51, 9 February 2018 (diff | hist) . . (-22) . . L'éolienne/en (Page créée avec « When you place your connector on a table with the plastic strip facing up, the right tab is your positive terminal, and the left tab is your negative terminal. »)
- 13:50, 9 February 2018 (diff | hist) . . (-9) . . L'éolienne/en (Page créée avec « The electric circuit - USB port connection »)
- 13:50, 9 February 2018 (diff | hist) . . (-15) . . L'éolienne/en (Page créée avec « Alternative: Use a voltage booster that will provide an output voltage of 5V (USB) with an input voltage ranging from 0.9 to 5V. »)
- 13:50, 9 February 2018 (diff | hist) . . (+15) . . L'éolienne/en (Page créée avec « 1 - Solder the negative pole of the capacitor with the common rod of the voltage regulator. Solder the positive pole of the capacitor to the input of the voltage regulator... »)
- 13:50, 9 February 2018 (diff | hist) . . (0) . . L'éolienne/en
- 13:49, 9 February 2018 (diff | hist) . . (-11) . . L'éolienne/en (Page créée avec « The voltage regulator has 3 different rods: - 1 entry - 1 common - 1 output »)
- 13:48, 9 February 2018 (diff | hist) . . (-26) . . L'éolienne/en (Page créée avec « '' * Note: Each controller is different, if you want a 12V output, for example, buy your controller accordingly. Here to connect a USB port we will take a 5V controller.'' »)
- 13:47, 9 February 2018 (diff | hist) . . (-24) . . L'éolienne/en (Page créée avec « The voltage regulator allows a 5V output current. »)
- 13:47, 9 February 2018 (diff | hist) . . (-15) . . L'éolienne/en (Page créée avec « The electric circuit - Voltage Regulator or Voltage Booster »)
- 13:47, 9 February 2018 (diff | hist) . . (-32) . . L'éolienne/en (Page créée avec « '' * Tip: If the legs of your different components are too short to weld together, you can connect them using electrical wires. '' »)
- 13:46, 9 February 2018 (diff | hist) . . (+13) . . L'éolienne/en (Page créée avec « 1 - Solder the negative poles to each other and then the positive poles to each other at the rectifier output. '' (picture 9) '' »)
- 13:46, 9 February 2018 (diff | hist) . . (-18) . . L'éolienne/en (Page créée avec « '' * Tip: It is also possible to refer to the symbol "-" written on the negative pin. '' »)
- 13:45, 9 February 2018 (diff | hist) . . (-24) . . L'éolienne/en (Page créée avec « The capacitor is a polarized component: - the positive pin is the longest leg - the negative pin is the shortest leg »)
- 13:45, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « The energy supplied by the wind turbine is not constant because the wind speed varies constantly. It is therefore necessary temporarily to store the overload in order to b... »)
- 13:44, 9 February 2018 (diff | hist) . . (-7) . . L'éolienne/en (Page créée avec « The electric circuit - Capacitor »)
- 13:44, 9 February 2018 (diff | hist) . . (-10) . . L'éolienne/en (Page créée avec « 2 - Weld the negative outputs of the two rectifiers together, then weld the positive outputs of the two rectifiers together. '' (picture 8) '' »)
- 13:43, 9 February 2018 (diff | hist) . . (-36) . . L'éolienne/en (Page créée avec « ''*Tip: It is possible to use heat-shrink tubing to cover the connections to protect the system.'' »)
- 13:42, 9 February 2018 (diff | hist) . . (-18) . . L'éolienne/en (Page créée avec « 1 - Solder the voltage outputs of the stepper motor (previously selected) to the alternating inputs of each rectifier: the first pair with the alternating poles of the fir... »)
- 13:42, 9 February 2018 (diff | hist) . . (-8) . . L'éolienne/en (Page créée avec « ''* Hint : each one of these poles are marked on the rectifier's head. '' »)
- 13:41, 9 February 2018 (diff | hist) . . (-29) . . L'éolienne/en (Page créée avec « Each rectifier has 4 legs: The two central legs are the alternating poles of the capacitor The two outer legs are the positive and negative poles of the capacitor »)
- 13:40, 9 February 2018 (diff | hist) . . (-48) . . L'éolienne/en (Page créée avec « At the output of the motor, alternating current is obtained. However, to charge a battery or turn on a lamp, it is necessary to have direct current. To convert AC to DC, t... »)
- 13:39, 9 February 2018 (diff | hist) . . (-4) . . L'éolienne/en (Page créée avec « The electric circuit is shown in ''figure 4''. »)
- 13:39, 9 February 2018 (diff | hist) . . (-3) . . L'éolienne/en (Page créée avec « The electric circuit - Rectifiers »)
- 13:39, 9 February 2018 (diff | hist) . . (-12) . . L'éolienne/en (Page créée avec « 3 - Check that the angles between each blades are even. »)
- 13:38, 9 February 2018 (diff | hist) . . (+6) . . L'éolienne/en
- 13:38, 9 February 2018 (diff | hist) . . (+6) . . L'éolienne/en
- 13:38, 9 February 2018 (diff | hist) . . (+6) . . L'éolienne/en
- 13:38, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en
- 13:38, 9 February 2018 (diff | hist) . . (-16) . . L'éolienne/en (Page créée avec « 2 - Screw the base of the blades onto the metal plate. Use the holes drilled in the metal plate in step 2. '' (image 6) '' »)
- 13:35, 9 February 2018 (diff | hist) . . (-42) . . L'éolienne/en (Page créée avec « 1 - Screw the blades (step 3) to their basis (step 4). »)
- 13:35, 9 February 2018 (diff | hist) . . (+3) . . L'éolienne/en (Page créée avec « The wind turbine - Assembly »)
- 13:34, 9 February 2018 (diff | hist) . . (-9) . . L'éolienne/en (Page créée avec « 4 - Sand the edges of the aileron for better aerodynamics and better rendering. '' (picture 5) '' »)
- 13:34, 9 February 2018 (diff | hist) . . (-13) . . L'éolienne/en (Page créée avec « '' * Note: The dimensions of this part depend on the size of your engine. '' »)
- 13:33, 9 February 2018 (diff | hist) . . (+4) . . L'éolienne/en
- 13:33, 9 February 2018 (diff | hist) . . (+4) . . L'éolienne/en
- 13:33, 9 February 2018 (diff | hist) . . (+4) . . L'éolienne/en
- 13:33, 9 February 2018 (diff | hist) . . (+4) . . L'éolienne/en
- 13:33, 9 February 2018 (diff | hist) . . (-35) . . L'éolienne/en (Page créée avec « 3 - On the aileron, mark the location of the engine so that it can fit into the shape. '' (diagram 3 - engine) '' »)
- 13:31, 9 February 2018 (diff | hist) . . (-36) . . L'éolienne/en (Page créée avec « 2 - In this same board cut a square the size of your engine (here 80x80cm) which will be used to accommodate the previously cut blades and join them together. '' (diagram... »)
- 13:30, 9 February 2018 (diff | hist) . . (-20) . . L'éolienne/en (Page créée avec « '' * Hint: You can get help from diagram 3 above to draw the shape of the fin. '' »)
- 13:29, 9 February 2018 (diff | hist) . . (-17) . . L'éolienne/en (Page créée avec « 1 - In a wooden board, draw and cut the fin. '' (picture 5) '' »)
- 13:29, 9 February 2018 (diff | hist) . . (0) . . L'éolienne/en (Page créée avec « The wind turbine - Fin and blades basis »)
- 13:29, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « Your blades are ready ! »)
- 13:29, 9 February 2018 (diff | hist) . . (-26) . . L'éolienne/en (Page créée avec « 3 - Drill the blades: the drilling is done closer to the trailing edge so that it can be fixed flat on the plate that carries the blades. '' (Image 4) '' »)
- 13:28, 9 February 2018 (diff | hist) . . (-13) . . L'éolienne/en (Page créée avec « 2 - Sand the edges of each blade: the leading edge must be rounded, and the trailing edge sharpened. »)
- 13:27, 9 February 2018 (diff | hist) . . (-4) . . L'éolienne/en (Page créée avec « Figure 3 shows the direction of the cut. »)
- 13:27, 9 February 2018 (diff | hist) . . (-13) . . L'éolienne/en (Page créée avec « '' * Tip: You can get help from diagram 2 above to draw the shape of the blades. '' »)
- 13:27, 9 February 2018 (diff | hist) . . (-9) . . L'éolienne/en (Page créée avec « 1 - Draw and cut the blades in a PVC tube. '' (image 3) '' »)
- 13:26, 9 February 2018 (diff | hist) . . (-34) . . L'éolienne/en (Page créée avec « Usually, the blade length must be 35 cm. »)
- 13:26, 9 February 2018 (diff | hist) . . (-10) . . L'éolienne/en (Page créée avec « Where : * L = length of the blade in m * P = characteristic power of the motor in W * V = wind speed in m / s (depending on the location) »)
- 13:25, 9 February 2018 (diff | hist) . . (-12) . . L'éolienne/en (Page créée avec « We can establish this formula, allowing us to calculate the length of the blades: »)
- 13:25, 9 February 2018 (diff | hist) . . (-12) . . L'éolienne/en (Page créée avec « From the formula connecting the wind speed, a given surface and the power of the wind on this surface: »)
- 13:24, 9 February 2018 (diff | hist) . . (-8) . . L'éolienne/en (Page créée avec « The wind turbine - Blades prep »)
- 13:24, 9 February 2018 (diff | hist) . . (-10) . . L'éolienne/en (Page créée avec « 2 - Weld the metal plate to the motor axis at the plate's center hole. '' (image 2) '' »)
- 13:23, 9 February 2018 (diff | hist) . . (-19) . . L'éolienne/en (Page créée avec « '' * Tip: You can get help from diagram 1 above to cut and drill the plate. '' »)
- 13:23, 9 February 2018 (diff | hist) . . (-20) . . L'éolienne/en (Page créée avec « 1 - Cut out a metal plate of 80x30 cm. Drill 5 holes of diameter 4. »)
- 13:22, 9 February 2018 (diff | hist) . . (+2) . . L'éolienne/en (Page créée avec « The wind turbine - Motor axis »)
- 13:22, 9 February 2018 (diff | hist) . . (-11) . . L'éolienne/en (Page créée avec « Note: there are also 8-wire motors. In fact it's a 6-wire (so 4 coils) but with 4 independent coils (so pretty much like a 4-wire...). Use the same method as the 4-wire, b... »)
- 13:21, 9 February 2018 (diff | hist) . . (-47) . . L'éolienne/en (Page créée avec « For a 6-wire it's hardly more complex: we apply the same method to determine sets of 3 wires per coil. Then we go into ohmmeter mode and look which pair of wires per coil... »)
- 13:20, 9 February 2018 (diff | hist) . . (-20) . . L'éolienne/en (Page créée avec « For a 4-wire motor it's very simple: you take a wire on a probe, and with the other probe you touch the other wires. The one for which the meter does "BBBIIIIIPPPPP !!!" o... »)
- 13:18, 9 February 2018 (diff | hist) . . (-16) . . L'éolienne/en (Page créée avec « 2) First of all separate the two sets of wire for each of the coils. »)
- 13:17, 9 February 2018 (diff | hist) . . (-19) . . L'éolienne/en (Page créée avec « 1) Place your multimeter in ohmmeter mode, or even better in contact detection mode (you know, it makes this "BBIIIIPPPPP !!" noise when the two probes are touching). »)
- 13:17, 9 February 2018 (diff | hist) . . (-18) . . L'éolienne/en (Page créée avec « From here it's very simple : »)
- 13:16, 9 February 2018 (diff | hist) . . (-12) . . L'éolienne/en (Page créée avec « As shown in the picture, in the case of a 6-wire motor we will not use the midpoint. In fact, we are going to combine two coils to make one and generate more tension. »)
- 13:16, 9 February 2018 (diff | hist) . . (-35) . . L'éolienne/en (Page créée avec « In fact the stepper motors are schematically constituted of two or four coils: »)
- 13:15, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « '''Method #2''' »)
- 13:15, 9 February 2018 (diff | hist) . . (-18) . . L'éolienne/en (Page créée avec « '' * Tip: Mark with a colored tape the two useful pairs to no longer mix them with others. '' »)
- 13:14, 9 February 2018 (diff | hist) . . (-19) . . L'éolienne/en (Page créée avec « 3 - Select the two wire pairs with the highest output voltage (here 10V, this may vary depending on the motor). They are the ones who will then be connected to the electri... »)
- 13:13, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en
- 13:13, 9 February 2018 (diff | hist) . . (-35) . . L'éolienne/en (Page créée avec « 2 - Using a screwdriver, an "alternating" voltmeter and crocodile clips, test the pairs of wires. Record the voltage for each of the pairs. '' (image 1) '' »)
- 13:13, 9 February 2018 (diff | hist) . . (-26) . . L'éolienne/en (Page créée avec « In order to know which of the 6 wires has the highest output voltage, you should test all possible motor output couples, and select the two highest ones. »)
- 13:12, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « '''Method #1''' »)
- 13:12, 9 February 2018 (diff | hist) . . (-8) . . L'éolienne/en (Page créée avec « From here, two possible methods : »)
- 13:12, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « 1 - Cut the 6 wires coming out of the stepping motor, strip them and twist them. »)
- 13:11, 9 February 2018 (diff | hist) . . (0) . . L'éolienne/en (Page créée avec « The wind turbine - Motor preparation »)
- 13:11, 9 February 2018 (diff | hist) . . (-4) . . L'éolienne/en (Page créée avec « Motor protection »)
- 13:11, 9 February 2018 (diff | hist) . . (-5) . . L'éolienne/en (Page créée avec « 4 - USB port connection »)
- 13:11, 9 February 2018 (diff | hist) . . (-5) . . L'éolienne/en (Page créée avec « 3 - Voltage regulator »)
- 13:11, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « 2 - Capacitors »)
- 13:11, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « 1 - Rectifiers »)
- 13:10, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « '''The electric circuit''' »)
- 13:10, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « 5 - Assembly »)
- 13:10, 9 February 2018 (diff | hist) . . (-5) . . L'éolienne/en (Page créée avec « 4 - Fin and blades basis »)
- 13:10, 9 February 2018 (diff | hist) . . (-4) . . L'éolienne/en (Page créée avec « 3 - Blades preparation »)
- 13:10, 9 February 2018 (diff | hist) . . (-3) . . L'éolienne/en (Page créée avec « 2 - Motor axis »)
- 13:09, 9 February 2018 (diff | hist) . . (-5) . . L'éolienne/en (Page créée avec « 1 - Motor preparation »)
- 13:09, 9 February 2018 (diff | hist) . . (+5) . . L'éolienne/en (Page créée avec « '''The wind turbine''' »)
- 13:09, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « Manufacturing steps »)
- 13:08, 9 February 2018 (diff | hist) . . (-16) . . L'éolienne/en (Page créée avec « The wind turbine requires a minimum wind speed of about 10 to 15 km / h to start its rotation. »)
- 13:08, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « - A voltage regulator that limits the voltage of the electric current produced by the motor to the desired voltage, here 5V. »)
- 13:08, 9 February 2018 (diff | hist) . . (-30) . . L'éolienne/en (Page créée avec « - A capacitor to redistribute electricity constantly, because the wind provides a non-continuous energy. »)
- 13:07, 9 February 2018 (diff | hist) . . (-13) . . L'éolienne/en (Page créée avec « - Rectifiers that "straighten" the voltage at the output of the motor to have a continuous current. »)
- 13:06, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « It is made of : »)
- 13:06, 9 February 2018 (diff | hist) . . (-49) . . L'éolienne/en (Page créée avec « The circuit "treats" the output current of the motor, so that it can be used to charge a phone, or other device from a USB port. »)
- 13:06, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « '''3 - The electric circuit ''' »)
- 13:05, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « Thanks to the energy provided by the rotation of the blades, the stepper motor produces an alternating electric current. »)
- 13:05, 9 February 2018 (diff | hist) . . (-13) . . L'éolienne/en (Page créée avec « The propeller drives a printer stepper motor. »)
- 13:04, 9 February 2018 (diff | hist) . . (-9) . . L'éolienne/en (Page créée avec « '''2 - Electricity generation''' »)
- 13:04, 9 February 2018 (diff | hist) . . (-10) . . L'éolienne/en (Page créée avec « The 4 blade rotor is placed at the top of a mast to take more wind. »)
- 13:04, 9 February 2018 (diff | hist) . . (-6) . . L'éolienne/en (Page créée avec « Under the effect of the wind, the propeller, also called rotor, starts up. His blades turn. »)
- 13:03, 9 February 2018 (diff | hist) . . (+5) . . L'éolienne/en (Page créée avec « '''1 - The rotation of the blades''' »)
- 13:03, 9 February 2018 (diff | hist) . . (-40) . . L'éolienne/en (Page créée avec « '''This tutorial shows how to make a small wind turbine from old stepper engine from printers or copiers. It will allow for example to recharge a mobile phone. ''' »)
- 13:02, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « How it works »)
- 13:02, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « h - Soldering iron »)
- 13:02, 9 February 2018 (diff | hist) . . (-4) . . L'éolienne/en (Page créée avec « g - Cutting pliers »)
- 13:02, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « <u> Electric circuit: </ u> »)
- 13:02, 9 February 2018 (diff | hist) . . (-5) . . L'éolienne/en (Page créée avec « f - Alligator clips »)
- 13:01, 9 February 2018 (diff | hist) . . (-4) . . L'éolienne/en (Page créée avec « e - Voltmeter »)
- 13:01, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « d - Screwdriver »)
- 13:01, 9 February 2018 (diff | hist) . . (-5) . . L'éolienne/en (Page créée avec « c - Ruler »)
- 13:01, 9 February 2018 (diff | hist) . . (-12) . . L'éolienne/en (Page créée avec « b - Wood and metal saw »)
- 13:00, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « a - A vice »)
- 13:00, 9 February 2018 (diff | hist) . . (+6) . . L'éolienne/en (Page créée avec « <u> Wind turbine: </ u> »)
- 13:00, 9 February 2018 (diff | hist) . . (-13) . . L'éolienne/en (Page créée avec « Find the 3D model of this wind turbine [https://cad.onshape.com/documents/e2f661f83cf12a82e9ecb8f5/w/cd00be7c7cf2b2a8cc586f3c/e/b08da6447db094a9319da5fe by following this... »)
- 12:59, 9 February 2018 (diff | hist) . . (-5) . . L'éolienne/en (Page créée avec « 14 - Electric wire »)
- 12:59, 9 February 2018 (diff | hist) . . (-12) . . L'éolienne/en (Page créée avec « 13 - Tin for soldering »)
- 12:59, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en (Page créée avec « 12 - A USB connector »)
- 12:59, 9 February 2018 (diff | hist) . . (-20) . . L'éolienne/en (Page créée avec « 11' - Instead of the voltage regulator you can use a voltage booster or DC / DC Booster or Step Up which will provide an output voltage of 5V (USB) with an input voltage r... »)
- 12:58, 9 February 2018 (diff | hist) . . (-22) . . L'éolienne/en (Page créée avec « 11 - A voltage regulator {{W|Voltage Regulator}} LM7805 to set the voltage to 5V, we can also use the LM7812 to set the voltage to 12V »)
- 12:58, 9 February 2018 (diff | hist) . . (-9) . . L'éolienne/en (Page créée avec « 10 - A 1000μF 16V capacitor {{W|Capacitor (electricity)}} »)
- 12:57, 9 February 2018 (diff | hist) . . (-2) . . L'éolienne/en
- 12:57, 9 February 2018 (diff | hist) . . (-6) . . L'éolienne/en (Page créée avec « 9 - Two voltage rectifiers or diode bridge {{W | Rectifier}} »)
- 12:56, 9 February 2018 (diff | hist) . . (-27) . . L'éolienne/en (Page créée avec « 8 - A plastic support to accommodate the various elements of the system (recoverable on a flat part of the printer case) »)
- 12:56, 9 February 2018 (diff | hist) . . (-10) . . L'éolienne/en (Page créée avec « 3 - The printer stepper motor »)
- 12:56, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « <u> Electric circuit: </ u> »)
- 12:55, 9 February 2018 (diff | hist) . . (-4) . . L'éolienne/en (Page créée avec « 6 - Wood screws »)
- 12:55, 9 February 2018 (diff | hist) . . (-7) . . L'éolienne/en (Page créée avec « 5 - A bicycle inner tube »)
- 12:55, 9 February 2018 (diff | hist) . . (-12) . . L'éolienne/en (Page créée avec « 4 - A PVC tube (55 mm < diameter < 100 mm and at least 3 mm thick) »)
- 12:54, 9 February 2018 (diff | hist) . . (-5) . . L'éolienne/en
- 12:54, 9 February 2018 (diff | hist) . . (-16) . . L'éolienne/en (Page créée avec « 3 - A printer stepper motor (with its connection pin) »)
- 12:54, 9 February 2018 (diff | hist) . . (-15) . . L'éolienne/en (Page créée avec « 2 - A flat iron plate (at least 2 mm thick) »)
- 12:54, 9 February 2018 (diff | hist) . . (-14) . . L'éolienne/en (Page créée avec « 1 - A wooden board (at least 10 mm thick) »)
- 12:52, 9 February 2018 (diff | hist) . . (+4) . . L'éolienne/en (Page créée avec « <u>Wind turbine :</u> »)
- 12:52, 9 February 2018 (diff | hist) . . (-59) . . L'éolienne/en (Page créée avec « This wind turbine can therefore be very useful for remote areas with no access to grid electricity and that benefit from favorable winds. In Senegal, for example, only 40%... »)
- 12:51, 9 February 2018 (diff | hist) . . (-95) . . L'éolienne/en (Page créée avec « Easily build a low-tech wind turbine from recycled materials for less than 10 € is possible! Lower in power than industrial wind turbines, it can be used for local appli... »)
- 12:48, 9 February 2018 (diff | hist) . . (+6) . . L'éolienne/en (Page créée avec « THE LOW-TECH WIND TURBINE : »)
- 12:48, 9 February 2018 (diff | hist) . . (-64) . . L'éolienne/en (Page créée avec « A 2-megawatt industrial wind turbine produces approximately 4400 megawatts / hour annually, which represents the power consumption of about 2,000 people. Industrial wind t... »)
- 12:47, 9 February 2018 (diff | hist) . . (+4) . . L'éolienne/en (Page créée avec « THE INDUSTRIAL WIND TURBINE : »)
- 12:47, 9 February 2018 (diff | hist) . . (-185) . . L'éolienne/en (Page créée avec « Access to energy, and especially access to electricity, is a prerequisite for the economic and health development of a country. While global energy consumption has almost... »)
- 12:45, 9 February 2018 (diff | hist) . . (-1) . . L'éolienne/en (Page créée avec « CONTEXT : »)
- 12:45, 9 February 2018 (diff | hist) . . (-10) . . L'éolienne/en (Page créée avec « "In Africa, 600 million people in rural areas don't have access to electricity." »)
- 12:44, 9 February 2018 (diff | hist) . . (-12) . . L'éolienne/en (Page créée avec « Build a wind turbine from printer step-by-step engine »)
- 12:44, 9 February 2018 (diff | hist) . . (+17,817) . . N L'éolienne/en (Page créée avec « The wind turbine »)
- 11:51, 8 February 2018 (diff | hist) . . (-21) . . Powerbank simple/en (Page créée avec « 2) The minimum voltage reached by a discharged lithium-ion cell is 2.5V. If the voltage is lower, it can go to recycling. »)
- 11:50, 8 February 2018 (diff | hist) . . (-37) . . Découpeuse de bouteille plastique/en (Page créée avec « Check out the Low-tech Lab's [http://lowtechlab.org/biblilowtech/ Biblilowtech] ! »)
- 11:48, 8 February 2018 (diff | hist) . . (-2) . . Compost Bokashi de cuisine/en (Page créée avec « Harvest and use of fertilizer juice »)
- 11:46, 8 February 2018 (diff | hist) . . (-44) . . Savon à l'huile de coco/en
- 11:43, 8 February 2018 (diff | hist) . . (-8) . . Bassin de culture de spiruline/en (Page créée avec « * Documentation made by Amandine Garnier, Camille Duband & Clément Chabot, Aug 2017 »)
- 11:43, 8 February 2018 (diff | hist) . . (-3) . . Bassin de culture de spiruline/en (Page créée avec « Other references : * [http://universlavie.org/ Universlavie] * [https://www.antenna-france.org/notre-combat/la-spiruline/ Antenna] * [https://fr.wikipedia.org/wiki/Spiruli... »)
- 11:42, 8 February 2018 (diff | hist) . . (-10) . . Bassin de culture de spiruline/en (Page créée avec « For materials and products necessary to spirulina culture : * [https://spirulinasolutions.fr/ spirulinasolutions.fr] »)
- 11:42, 8 February 2018 (diff | hist) . . (-9) . . Bassin de culture de spiruline/en (Page créée avec « For ponds construction : * [http://spiruviecian.wixsite.com/site Spiruviecian] * [https://www.facebook.com/groups/spiruvie Facebook page of Spiruvie] »)
- 11:41, 8 February 2018 (diff | hist) . . (-12) . . Bassin de culture de spiruline/en (Page créée avec « For more informations on the family spirulina culture : [http://lab.lowtechlab.org/index.php?title=Culture_de_la_spiruline The tutorial] »)
- 11:41, 8 February 2018 (diff | hist) . . (-36) . . Bassin de culture de spiruline/en (Page créée avec « The pond is done ! Now prepare the culture medium, install an aquarium pump and then sow the spirulina. »)
- 11:40, 8 February 2018 (diff | hist) . . (-47) . . Bassin de culture de spiruline/en (Page créée avec « * Put a hinge every meter between the hood and the rear face of the pond, * Screw cleats "in crown" of the outer frame to cover the tarpaulin and the geotextile at the sta... »)
- 11:39, 8 February 2018 (diff | hist) . . (-2) . . Bassin de culture de spiruline/en (Page créée avec « Assembly »)
- 11:38, 8 February 2018 (diff | hist) . . (-42) . . Bassin de culture de spiruline/en (Page créée avec « A geotextile makes it possible to improve the insulation and especially to prevent the tarpaulin from being torn apart. * Lay the geotextile at the bottom of the pool and... »)
- 11:36, 8 February 2018 (diff | hist) . . (-6) . . Bassin de culture de spiruline/en (Page créée avec « Sealing »)
- 11:35, 8 February 2018 (diff | hist) . . (-21) . . Bassin de culture de spiruline/en (Page créée avec « * Put two or three cardboard layers on the floor inside the pond. »)
- 11:35, 8 February 2018 (diff | hist) . . (+1) . . Bassin de culture de spiruline/en (Page créée avec « Insulation »)
- 11:35, 8 February 2018 (diff | hist) . . (-130) . . Bassin de culture de spiruline/en (Page créée avec « A translucent cover placed on the basin allows the culture medium's temperature to rise quickly in the morning and to keep its heat at night. A polycarbonate plate acts as... »)
- 11:31, 8 February 2018 (diff | hist) . . (-6) . . Bassin de culture de spiruline/en (Page créée avec « Culture pond : hood »)
- 11:31, 8 February 2018 (diff | hist) . . (-253) . . Bassin de culture de spiruline/en (Page créée avec « * Place a cleats frame on the floor 18 mm from the edges of the floor. Distance to adapt according to the thickness of the trench used to make the basin, * Make a lath fra... »)
- 11:27, 8 February 2018 (diff | hist) . . (-57) . . Bassin de culture de spiruline/en (Page créée avec « For ergonomics, the front is lower than the bottom. 30 cm at the front, 40 at the back of the basin. To improve the production, we isolate the basin, it will keep the heat... »)
- 11:26, 8 February 2018 (diff | hist) . . (-10) . . Bassin de culture de spiruline/en (Page créée avec « Culture pond : pond structure »)
- 11:25, 8 February 2018 (diff | hist) . . (-19) . . Bassin de culture de spiruline/en (Page créée avec « * Install a plywood floor approximately 18 mm thick on the high frame, * Screw the boards on the stiffeners. The raising of the pond is finished. »)
- 11:25, 8 February 2018 (diff | hist) . . (-11) . . Bassin de culture de spiruline/en (Page créée avec « Pond support structure : support floor »)
- 11:25, 8 February 2018 (diff | hist) . . (-62) . . Bassin de culture de spiruline/en (Page créée avec « The top chassis is a copy of the bottom chassis. * Lay two new 3m long half-rafters on the legs, above the bottom frame ones, to make the length of the high frame. '''TIP'... »)
- 11:21, 8 February 2018 (diff | hist) . . (-11) . . Bassin de culture de spiruline/en (Page créée avec « Pond support structure : high frame »)
- 11:21, 8 February 2018 (diff | hist) . . (+1) . . Bassin de culture de spiruline/en
- 11:21, 8 February 2018 (diff | hist) . . (-45) . . Bassin de culture de spiruline/en (Page créée avec « For ergonomics, it is necessary to adjust the height of the basin to the worker's size. The basin is 30 centimeters high. In our case the bottom of the basin is one meter... »)
- 11:17, 8 February 2018 (diff | hist) . . (-15) . . Bassin de culture de spiruline/en (Page créée avec « Pond support structure : raising »)
- 11:17, 8 February 2018 (diff | hist) . . (-63) . . Bassin de culture de spiruline/en (Page créée avec « * Make 3x1m frame with half-rafters, * Place a square of about 30 cm in each corner, * Add two half-rafter stiffeners, one at 1 m, the other at 2 m lengthwise. »)
- 11:14, 8 February 2018 (diff | hist) . . (-12) . . Bassin de culture de spiruline/en (Page créée avec « Pond support structure: low frame »)
- 11:14, 8 February 2018 (diff | hist) . . (-20) . . Bassin de culture de spiruline/en (Page créée avec « * Circular saw / miter saw * Hand saw * Screwdriver * Electric planes * Stapler * Silicone gun »)
- 11:13, 8 February 2018 (diff | hist) . . (-19) . . Bassin de culture de spiruline/en (Page créée avec « * 50 to 100 mm long wood screws * 18mm lath * Half-rafter * Leveling feet * Geotextile * Waterproof tarpaulin * Staples * Greenhouse tarpaulin or food film * Polycarbonate... »)
- 11:08, 8 February 2018 (diff | hist) . . (-8) . . Bassin de culture de spiruline/en
- 11:08, 8 February 2018 (diff | hist) . . (-10) . . Bassin de culture de spiruline/en (Page créée avec « See [https://youtu.be/kk7um3d8MyQ ici] the video and [http://lab.lowtechlab.org/index.php?title=Culture_de_la_spiruline la culture de la spiruline]. »)
- 11:07, 8 February 2018 (diff | hist) . . (-20) . . Bassin de culture de spiruline/en (Page créée avec « This tutorial is done in collaboration with Enkidou Burtschell, specialist in bioclimatic eco-construction and state-certified spirulina producer. »)
- 11:06, 8 February 2018 (diff | hist) . . (-69) . . Bassin de culture de spiruline/en (Page créée avec « The pond presented in this tutorial is raised to allow to work standing, which is more comfortable. It also allows material to be stored under the basin. Starting at the "... »)
- 11:03, 8 February 2018 (diff | hist) . . (+647) . . Bassin de culture de spiruline/en
- 14:56, 2 September 2016 (diff | hist) . . (+58) . . Biodigesteur
- 14:46, 2 September 2016 (diff | hist) . . (0) . . m Biodigesteur (Enregistré en utilisant le bouton "Sauvegarder et continuer" du formulaire)
- 14:37, 2 September 2016 (diff | hist) . . (-88) . . Biodigesteur