Norwegian pot super-efficient fabric

Cette page est une version traduite de la page Marmite Norvégienne Tissu Super Efficace et la traduction est complétée à 100 %. Participer à la traduction

Tutorial de avatarNinon d'Ecocotte | Catégories : Alimentation

A flexible, nomadic and elegant Norwegian pot that guarantees maximum thermal insulation and requires only a few basic sewing skills. For a healthy and sober end to your cooking.

Licence : Attribution (CC BY)

Introduction

The Norwegian pot is a great tool for finishing low-temperature cooking using only the energy needed to heat the food.

It not only makes cooking healthy and tasty, but also saves a considerable amount of energy if it is used often (up to 80% savings per cooking).

Be careful, though, not to risk food poisoning with a system that doesn't provide enough insulation and encourages the growth of bacteria (even if you don't eat meat).

The tutorial below is the result of the work of a thermicist-cook who sought to maximise the insulating efficiency of the flexible version of the Norwegian pot.
This shared experience will enable you to guarantee that the temperature will be maintained above 60°C for more than 10 hours with an ordinary stewpot, and much longer with a cast-iron or earthenware casserole, simply by bringing the food to the boil for a few minutes.

Tutorial under licence: CC BY NC


Video d'introduction

Matériaux

- Washed and flocked sheep's wool (quantity according to size chosen - step 1)

All types of wool are suitable. Make sure the wool is properly washed. Flocking wool means aerating it as much as possible with your hands or a carding system to allow the air to settle into the fibre. It is not necessary to obtain a well carded & combed wool mat, quite the opposite
.

- natural fabric 2 times 1m50 x 1m20

Please use a thick fabric for the inside (at least) and a tightly woven fabric to keep the wool strands inside. In the case of very coarse wool, don't hesitate to double your fabric
.

- 50cm 5 handles (optional)

- Wires

- 3m cord

- Button


Outils

- Sewing machine

- XXL compass or string

- Protractor

- Scissors

- Pins

- Ruler

- Chalk

Étape 1 - Sizing GUIDE

This type of Norwegian pot can be adapted to all shapes and sizes of stewpot, so we're talking about maximum capacity rather than size.


To increase the capacity a little or to take into account a large handle (pressure cooker type), I advise you to play with the size of the lid rather than the rest.

Size Maximum capacity 1-

Pillow radius

2- Radius

cutting

3-

Radius

interior

4-

Centre radius Quantity of wool washed

1 3 Litres 17 cm 43 cm 35 cm 12 cm 0.9 to 1.2 kg
2 8 litres 21 cm 55 cm 45 cm 16 cm 1.9 to 2.3 kg
3 12 Litres 28 cm 55 cm 45 cm 16 cm 2.2 to 2.5 kg



Étape 2 - Cutting

Stand on the floor or find a large table.

  • Overlap the two fabrics
  • Mark and fix the centre of your markings on the 2 layers with a needle.
  • Trace the circles of the central part and the pillow according to the size of casserole you want (see size guide table).
  • Cut the 2 layers of fabric together to make sewing easier.


Étape 3 - Tracing

Take chalk with you

  • Use a compass to draw a circle 8 to 10 cm from the edge. This space will allow the cord to pass through and the lid to be wedged to minimise heat loss (diameter depending on your casseroles => see size table).
  • Draw a dotted line around the second circle, which will form the central part.
  • Use a ruler to trace the sides 2 by 2. Check that the space between the sides of the lower part is at least 8-9 cm (more if you have big hands) to allow for padding.
  • The length of the sides determines the maximum height of the casserole.
  • Hatch the upper boundary of a portion that will not be sewn to allow for stuffing.
You can replace :

- chalk with a piece of soap (ideal for dark fabrics)

- the compass by a string


Étape 4 - Assembly of the fabrics

The fabrics are joined together using the central pieced seam.

  • Add pins in the centre of the main part to prevent the fabric from moving.
  • Sew the peripheral circle (1) outside the hatched upholstery area.
  • Sew up the right "sides", respecting the tracing to make sure that your hands will be able to get through when stuffing. The sides of the main padding area can be narrowed by 1cm to make it easier for the wool to pass through.
  • Reinforce the locking stitches as these seams will be put under a lot of stress later on.
  • Cut the seam threads.
  • Erase your tracing, leaving only the hatched area of the stuffing.
Do not close the piecing that will be used for the padding
You can attach the handles, pass the cord through and partially close the outside at this stage (steps 7,8 & 9)

Étape 5 - Stuffing

This step is essential to limit thermal bridges and guarantee the insulating efficiency of your Norwegian pot (quantity of wool required in the "Sizing Guide" - step 1).

Stuff with wool cuffs without making tight little balls

starting with the corners

  • Fill the first 4 Pie charts 3/4 full, then turn them over to make them easier to handle.
Measuring the amount of wool is the most complicated part: the Pie must be firm but allow for closure by folding slightly
Don't pack the wool into tight little balls. Do not pull the seams too tight
  • Finish filling the pie charts.
  • Stuff the centre.
  • Start by creating a link between each pie charts and the centre with a large cuff of wool.
  • Stuff the centre more firmly as it will settle over time.
  • Finish by stuffing the last pie without letting the wool overflow to allow it to close.

Étape 6 - Closing central part

  • Sew the central part following the hatched marking.
  • Then remove the remaining markings.




Étape 7 - Positioning of handles (optional)

Place the handles opposite each other, taking care not to twist them.

Secure with pins



Étape 8 - Passing the cord

Position the cord, securing it with pins to prevent it getting caught in the seam.

Place and fix the exit of the cord in the centre of one of the pie charts at 90° to the handles (if there are any)

Fix the cord to the inside seam with pins to avoid catching it in the seam

Prepare the external closure by turning the two layers of fabric inside out by 1cm. Secure with clips or pins.




Étape 9 - External closure

  • Sew up the outside

Make sure you take the 2 layers of fabric and watch out for creases.


  • Reinforce the seam at the cord entry with a tight zigzag.


Étape 10 - "button"

Slide the button onto the cord




Étape 11 - The pillow

  • Sew the pillow inside out, leaving a 10cm opening for the stuffing.
  • Turn the assembled pillow inside out.
  • Stuff the pillow:

It should form a fairly compact "pebble" 8-9 cm thick.

Close the pillow seam


Étape 12 - Result

And now your Norwegian Pot is complete!

All that's left is to try your hand at low-temperature stewing: it takes a bit of planning, but the result is so tasty.

Notes et références

Commentaires

Published