Remorque à vélo en bois/en : Différence entre versions

(Page créée avec « rafter 1 -> board 2 -> rafter 3 -> plates + wheels -> board 4 »)
(Page créée avec « Rafters 1 and 3 must be staggered. The rafters 3 must frame the bicycle wheels, so their thickness must be equal to the width of the wheels with plate. »)
Ligne 74 : Ligne 74 :
  
  
Les chevrons 1 et 3 doivent être décalées. Les chevrons 3 doivent encadrer les roues de vélo, leur épaisseur doit donc être égale à la largeur des roues avec platine.
+
Rafters 1 and 3 must be staggered. The rafters 3 must frame the bicycle wheels, so their thickness must be equal to the width of the wheels with plate.
 
|Step_Picture_00=Remorque___v_lo_en_bois_sch_ma_remorque.png
 
|Step_Picture_00=Remorque___v_lo_en_bois_sch_ma_remorque.png
 
|Step_Picture_00_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":0,"top":-0.02,"width":962,"height":635,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.62,"scaleY":0.62,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/b/b0/Remorque_v_lo_en_bois_sch_ma_remorque.png","filters":[]},{"type":"textbox","version":"3.5.0","originX":"center","originY":"center","left":257,"top":106,"width":52.75,"height":22.6,"fill":"#0054FF","stroke":"#0054FF","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"Roue","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"splitByGrapheme":false,"styles":{} },{"type":"textbox","version":"3.5.0","originX":"center","originY":"center","left":265,"top":346,"width":52.75,"height":22.6,"fill":"#0054FF","stroke":"#0054FF","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"Roue","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"splitByGrapheme":false,"styles":{} }],"height":396,"width":600}
 
|Step_Picture_00_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":0,"top":-0.02,"width":962,"height":635,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.62,"scaleY":0.62,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/b/b0/Remorque_v_lo_en_bois_sch_ma_remorque.png","filters":[]},{"type":"textbox","version":"3.5.0","originX":"center","originY":"center","left":257,"top":106,"width":52.75,"height":22.6,"fill":"#0054FF","stroke":"#0054FF","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"Roue","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"splitByGrapheme":false,"styles":{} },{"type":"textbox","version":"3.5.0","originX":"center","originY":"center","left":265,"top":346,"width":52.75,"height":22.6,"fill":"#0054FF","stroke":"#0054FF","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"Roue","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"splitByGrapheme":false,"styles":{} }],"height":396,"width":600}

Version du 7 décembre 2020 à 20:34

Tutorial de avatarLow Tech Developer | Catégories : Habitat, Outils

Two-wheel wooden trailer for transporting 2m50 objects.

Licence : Attribution-ShareAlike (CC BY-SA)

Introduction

This bicycle trailer was produced for the opening of the Low Tech Lab Gd Paris in Boulogne-Billancourt.

It was made from herringbone pallets at Simplon Lab.

It allows you to transport objects of 2m50.

Video d'introduction

Matériaux

- 2 herringbone pallets

- 2 bicycle wheels

- wood screws

- 4 decks

- 1 air chamber

Outils

- Crowbar

- Hammer

- saw

- Screwdriver

Étape 1 - Definition of need

Before any construction project, it is important to define the need. In our case, we wanted to transport objects 2m50 long in Paris. The trailer can be used to transport other pallets, or to transport boxes, the structure is adapted accordingly.

It is also necessary to put down in writing the desired structure and to reflect in group on the feasibility of this structure. The width of a bicycle trailer cannot exceed 1m.

Étape 2 - Material recovery

The pallets can be collected from craftsmen or professionals. Bike wheels can be picked up from bike shops.


The pallets can be dismantled with a crowbar and a hammer.




Étape 3 - Construction of the wooden structure

On the wooden structure, there are 4 categories of boards:

- Plates 2 and 4

- The rafters 1 and 3


The structure must be mounted from the center

rafter 1 -> board 2 -> rafter 3 -> plates + wheels -> board 4


Rafters 1 and 3 must be staggered. The rafters 3 must frame the bicycle wheels, so their thickness must be equal to the width of the wheels with plate.

Étape 4 - Fixation des roues

Les roues doivent être fixées avant les planches 4.


Les platines peuvent être fixées aux planches 2 et 4.


Étape 5 - Lier la remorque au vélo

La remorque peut maintenant être fixée au porte bagage du vélo. Le système de liaison doit respecter les conditions suivantes :

  • supporter la charge de la remorque
  • supporter une légère inclinaison du vélo
  • pouvoir être attacher et détacher facilement
  • supporter freinage/ accélation (supporter une force dans toutes les directions)

Dans notre cas, nous avons choisit de fixer la remorque avec une chambre à air.


Commentaires

Published