Remorque à vélo en bois/en : Différence entre versions

Version actuelle datée du 26 août 2021 à 17:21

Tutorial de Low Tech Developer | Catégories : Habitat, Outils

Low Tech Developer

https://wiki.lowtechlab.org/wiki/Remorque_%C3%A0_v%C3%A9lo_en_bois/en

Dernière modification le 26/08/2021

Difficulté

Moyen

Durée

1 jour(s)

Coût

20 EUR (€)

Description

Two-wheel wooden trailer for transporting 2m50 objects.

Difficulté

Moyen

Durée

1 jour(s)

Coût

20 EUR (€)

Autres langues :

English • ‎français

Sommaire

1 Description
2 Sommaire
3 Introduction
4 Video d'introduction
5 Étape 1 - Definition of need
6 Étape 2 - Material recovery
7 Étape 3 - Construction of the wooden structure
8 Étape 4 - Fixing the wheels
9 Étape 5 - Link the trailer to the bike
10 Commentaires

Licence : Attribution-ShareAlike (CC BY-SA)

Introduction

This bicycle trailer was produced for the opening of the Low Tech Lab Gd Paris in Boulogne-Billancourt.

It was made from herringbone pallets at Simplon Lab.

It allows you to transport objects of 2m50.

Video d'introduction

Youtube

Remorque v lo en bois Capture d cran du 2020-11-02 09-07-57.png

Matériaux

- 2 herringbone pallets

- 2 bicycle wheels

- wood screws

- 4 decks

- 1 air chamber

Outils

- Crowbar

- Hammer

- saw

- Screwdriver

Étape 1 - Definition of need

Before any construction project, it is important to define the need. In our case, we wanted to transport objects 2m50 long in Paris. The trailer can be used to transport other pallets, or to transport boxes, the structure is adapted accordingly.

It is also necessary to put down in writing the desired structure and to reflect in group on the feasibility of this structure. The width of a bicycle trailer cannot exceed 1m.

Étape 2 - Material recovery

The pallets can be collected from craftsmen or professionals. Bike wheels can be picked up from bike shops.

The pallets can be dismantled with a crowbar and a hammer.

Remorque v lo en bois D monter palette.png

Étape 3 - Construction of the wooden structure

On the wooden structure, there are 4 categories of boards:

- Plates 2 and 4

- The rafters 1 and 3

The structure must be mounted from the center

rafter 1 -> board 2 -> rafter 3 -> plates + wheels -> board 4

Rafters 1 and 3 must be staggered. The rafters 3 must frame the bicycle wheels, so their thickness must be equal to the width of the wheels with plate.

Étape 4 - Fixing the wheels

The wheels must be fixed before the boards 4.

The plates can be attached to boards 2 and 4.

Étape 5 - Link the trailer to the bike

The trailer can now be attached to the bicycle rack. The connection system must meet the following conditions:

bear the load of the trailer
withstand a slight tilt of the bike
be able to be attached and detached easily
bear braking / acceleration (bear force in all directions)

In our case, we chose to fix the trailer with an inner tube.

Commentaires

en fr 1 Published

@@ Ligne 3 : / Ligne 3 : @@
 |Main_Picture_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":-4,"top":-23,"width":482,"height":394,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1.26,"scaleY":1.26,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/1/18/Remorque_v_lo_en_bois_Remorque_seule.png","filters":[]}],"height":449.25619834710744,"width":600}
 |Licences=Attribution-ShareAlike (CC BY-SA)
-|Description=Remorque deux roues en bois pour transporter des objets de 2m 50.
+|Description=Two-wheel wooden trailer for transporting 2m50 objects.
 |Area=Habitat, Tools
 |Type=Tutorial
@@ Ligne 14 : / Ligne 14 : @@
 }}
 {{Introduction
-|Introduction=Cette remorque à vélo a été réalisée dans le cadre de l'ouverture du Low Tech Lab Gd Paris à Boulogne-Billancourt.
+|Introduction=This bicycle trailer was produced for the opening of the Low Tech Lab Gd Paris in Boulogne-Billancourt.
-Elle a été réalisée à partir de palettes chevrons au [http://fablab.simplon.co/ Simplon Lab].
+It was made from herringbone pallets at [http://fablab.simplon.co/ Simplon Lab].
-Elle permet de transporter des objets de 2m50.
+It allows you to transport objects of 2m50.
 }}
 {{TutoVideo
@@ Ligne 26 : / Ligne 26 : @@
 {{Materials
 |Step_Picture_00=Remorque___v_lo_en_bois_Capture_d_cran_du_2020-11-02_09-07-57.png
-|Material=- 2 palettes chevrons
+|Material=- 2 herringbone pallets
-- 2 roues de vélo
+- 2 bicycle wheels
-- des vis à bois
+- wood screws
-- 4 platines
+- 4 decks
-- 1 chambre à air
+- 1 air chamber
-|Tools=- Pied de biche
+|Tools=- Crowbar
-- Marteau
+- Hammer
-- Scie
+- saw
-- Visseuse
+- Screwdriver
+|Tuto_Attachments={{Tuto Attachments}}
 }}
 {{Tuto Step
-|Step_Title=Définition du besoin
+|Step_Title=Definition of need
-|Step_Content=Avant tout projet de construction, il est important de définir le besoin. Dans notre cas, nous souhaitions transporter des objets de 2m50 de long dans Paris. La remorque peut  être utilisée pour transporter d'autres palettes, ou pour transporter des caisses, la structure est à adaptée en conséquence.
+|Step_Content=Before any construction project, it is important to define the need. In our case, we wanted to transport objects 2m50 long in Paris. The trailer can be used to transport other pallets, or to transport boxes, the structure is adapted accordingly.
-<br />Il est également nécessaire de poser par écrit la structure souhaitée et de réfléchir en groupe sur la faisabilité de cette structure. La largeur d'une remorque à vélo ne peut pas excéder 1m.
+It is also necessary to put down in writing the desired structure and to reflect in group on the feasibility of this structure. The width of a bicycle trailer cannot exceed 1m.
 }}
 {{Tuto Step
-|Step_Title=Récupération du matériel
+|Step_Title=Material recovery
-|Step_Content=Les palettes peuvent être récupérées chez des artisans ou chez des professionnels. Les roues de vélo peuvent être récupérées dans les magasins de vélo.
+|Step_Content=The pallets can be collected from craftsmen or professionals. Bike wheels can be picked up from bike shops.
+The pallets can be dismantled with a crowbar and a hammer.
-Les palettes peuvent être démontées avec un pied de biche et un marteau.
 <br />
@@ Ligne 61 : / Ligne 61 : @@
 }}
 {{Tuto Step
-|Step_Title=Construction de la structure en bois
+|Step_Title=Construction of the wooden structure
-|Step_Content=Sur la structure en bois, il y a 4 catégories de planches :
+|Step_Content=On the wooden structure, there are 4 categories of boards:
-- Les planches 2 et 4
-- Les chevrons 1 et 3
+- Plates 2 and 4
-La structure doit être montée depuis le centre
+- The rafters 1 and 3
-chevron 1 -> planche 2 -> chevron 3 -> platines + roues ->  planche 4
+The structure must be mounted from the center
+rafter 1 -> board 2 -> rafter 3 -> plates + wheels -> board 4
-Les chevrons 1 et 3 doivent être décalées. Les chevrons 3 doivent encadrer les roues de vélo, leur épaisseur doit donc être égale à la largeur des roues avec platine.
+Rafters 1 and 3 must be staggered. The rafters 3 must frame the bicycle wheels, so their thickness must be equal to the width of the wheels with plate.
 |Step_Picture_00=Remorque___v_lo_en_bois_sch_ma_remorque.png
 |Step_Picture_00_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":0,"top":-0.02,"width":962,"height":635,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.62,"scaleY":0.62,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/b/b0/Remorque_v_lo_en_bois_sch_ma_remorque.png","filters":[]},{"type":"textbox","version":"3.5.0","originX":"center","originY":"center","left":257,"top":106,"width":52.75,"height":22.6,"fill":"#0054FF","stroke":"#0054FF","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"Roue","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"splitByGrapheme":false,"styles":{} },{"type":"textbox","version":"3.5.0","originX":"center","originY":"center","left":265,"top":346,"width":52.75,"height":22.6,"fill":"#0054FF","stroke":"#0054FF","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"Roue","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"splitByGrapheme":false,"styles":{} }],"height":396,"width":600}
@@ Ligne 84 : / Ligne 82 : @@
 }}
 {{Tuto Step
-|Step_Title=Fixation des roues
+|Step_Title=Fixing the wheels
-|Step_Content=Les roues doivent être fixées avant les planches 4.
+|Step_Content=The wheels must be fixed before the boards 4.
-Les platines peuvent être fixées aux planches 2 et 4.
+The plates can be attached to boards 2 and 4.
 |Step_Picture_00=Remorque___v_lo_en_bois_02b_mise_en_place_platinePA270046.JPG
 |Step_Picture_01=Remorque___v_lo_en_bois_VISSAGE_PLATINE.png
@@ Ligne 95 : / Ligne 92 : @@
 }}
 {{Tuto Step
-|Step_Title=Lier la remorque au vélo
+|Step_Title=Link the trailer to the bike
-|Step_Content=La remorque peut maintenant être fixée au porte bagage du vélo. Le système de liaison doit respecter les conditions suivantes :
+|Step_Content=The trailer can now be attached to the bicycle rack. The connection system must meet the following conditions:
-*supporter la charge de la remorque
+* bear the load of the trailer
-*supporter une légère inclinaison du vélo
+* withstand a slight tilt of the bike
-*pouvoir être attacher et détacher facilement
+* be able to be attached and detached easily
-*supporter freinage/ accélation (supporter une force dans toutes les directions)
+* bear braking / acceleration (bear force in all directions)
-Dans notre cas, nous avons choisit de fixer la remorque avec une chambre à air.
+In our case, we chose to fix the trailer with an inner tube.
 <br />