Adjusting the height
- Take the length between the level of the concrete and the height of the barrel. * Deduct a 2-3 mm margin and the thickness of the glass and add 15mm for the fins.
- Use these measurements when making the bell chamber and put some tape all along the edges. This is for marking the line you need to follow when cutting.
- Cut out the bell chamber
- Mark the final height of bell chamber (distance between the level of the concrete and the height of the barrel, deducting a 2-3 mm margin and the thickness of the glass)
- Make the fins out of the side where the cut is not as clean.
- Fold all the fins out towards the outside. This will allow the bell chamber to stick onto the concrete.
Français
English
Deutsch
Español
Italiano
Português