Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.
Liste de résultats
- * At about 5 cm from the top edge of the board, mark the location of two holes spaced by 4cm; * Dril two holes where indicated with the 5mm drill bit +
- * Insert the screws into the holes; * File 6 washers on each screw; * Pre-screw the nuts on the screws. +
- Drill two holes in the board. In these two … Drill two holes in the board. In these two holes are bolted bolts, around which are inserted washers. A cutter blade is disposed between the washers. With this device, we can cut plastic bottles to transform them into yarn of adjustable thickness (the thickness of the yarn is modified with the height of the cutter blade). On the system used here, the dimensions are slightly different. The manufacturing remains exactly the same, but the dimensions given in this tutorial are optimized compared to those shown in the photos.zed compared to those shown in the photos. +
- For optimal cutting of PET bottles, remove … For optimal cutting of PET bottles, remove the bottom of the bottle. Pre-cut a thin plastic strip at the bottom of the bottle (corresponding to the spacing between the cutter blade and the board). Insert the thin strip between the cutter blade and the board. Applying slight pressure on the neck of the bottle with one hand, pull the plastic slide with the other hand. With a little practice, it is possible to make a big yarn with the whole bottle. to make a big yarn with the whole bottle. +
- This yarn is very useful for making object … This yarn is very useful for making objects of all kinds. When heated, the wire retracts and offers a very satisfactory resistance. On the boat, the crew of Nomade des Mers and its partners made all sorts of objects thanks to the plastic yarn: parts of the fridge without energy Pimp my Fridge, low-tech crutch ... Opposite the manufacture of a crutch. Plastic offers sufficient strength to support the weight of a man.t strength to support the weight of a man. +
- Using a clamp (safety requires), insert the cutter blade between the washers at the same height on each side. The sharpened side of the bladeis in front of the short side of the board. +
- Using the flat screwdriver and the socket wrench, tighten the nuts on the bolts. Squeeze tight so that the blade does not move. the bottle cutter is ready! +
Français
English
Deutsch
Español
Italiano
Português