(Page créée avec « {{Warning|To make the lamp dismantable, the screw heads should be on the inside and the screws should be shorter than the two boards thinckness.}} ») |
|||
| Ligne 1 : | Ligne 1 : | ||
| − | + | *Place the small board with the circuit inside of the plastic envelope and screw a big board below it (15/13cm), taking tare that the plastic tabs take place between the two boards. | |
Version actuelle datée du 25 février 2020 à 17:55
- Place the small board with the circuit inside of the plastic envelope and screw a big board below it (15/13cm), taking tare that the plastic tabs take place between the two boards.
Français
English
Deutsch
Español
Italiano
Português