Difference between revisions of "Cuiseur solaire parabolique/en"

(Page créée avec « Stick the mirror film onto the entire surface of the parabolic dish by cutting it into small pieces to prevent bubbles from forming. »)
(Page créée avec « Attachment of the parabolic dish to the stand »)
Line 91: Line 91:
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
|Step_Title=Fixation de la parabole sur le support / Attachment of the parabolic dish to the stand
+
|Step_Title=Attachment of the parabolic dish to the stand
 
|Step_Content=Français :
 
|Step_Content=Français :
 
<!--F-->
 
<!--F-->

Revision as of 21:38, 6 February 2023

Tutorial de avatarLow-tech with Refugees - Low-tech & Réfugiés | Categories : Food, Energy, Tools

The parabolic or concentrated oven consists of a parabolic-shaped reflector. Its shiny mirror-effect surface captures the sun's rays, concentrates them, and then reflects them onto the cooking surface located on the grid.

License : Attribution (CC BY)

Introduction

The solar concentrated oven is a device that uses a mirror-effect surface to concentrate solar light onto a very narrow focal point. This focal point can reach extremely high temperatures, up to several thousand degrees Celsius, making it a very powerful tool for producing thermal energy.

Concentrated solar ovens are considered a clean and sustainable energy source that can replace conventional energy sources such as fossil fuels.

English : The solar concentrated oven is a device that uses a mirror-effect surface to concentrate solar light onto a very narrow focal point. This focal point can reach extremely high temperatures, up to several thousand degrees Celsius, making it a very powerful tool for producing thermal energy.

Concentrated solar ovens are considered a clean and sustainable energy source that can replace conventional energy sources such as fossil fuels.

Materials

  • Two parabolic reflectors with support
  • A support with wheels
  • A grid
  • Screws
  • A mirror effect film

English :

  • Two parabolic reflectors with support
  • A support with wheels
  • A grid
  • Screws
  • A mirror effect film

Tools

  • Wireless drill
  • Scissors
  • Hammer
  • Wrench
  • Pliers
  • Measuring tools
  • Vice
  • Spacers
  • Copper wire

English :

  • Wireless drill
  • Scissors
  • Hammer
  • Wrench
  • Pliers
  • Measuring tools
  • Vice
  • Spacers
  • Copper wire

Step 1 - Preparation of the rolling stand

Use a rolling table, with a rectangular sheet that needs to be fixed with a drill and screws on the stand to place the tube that will support the parabolic dish later.

English : Use a rolling table, with a rectangular sheet that needs to be fixed with a drill and screws on the stand to place the tube that will support the parabolic dish later.


Step 2 - Placement of the mirror film on the parabolic dish

Stick the mirror film onto the entire surface of the parabolic dish by cutting it into small pieces to prevent bubbles from forming.

English : Stick the mirror film onto the entire surface of the parabolic dish by cutting it into small pieces to prevent bubbles from forming.


Step 3 - Attachment of the parabolic dish to the stand

Français : Fixer la parabole sur le support à l'aide des clés de serrage.

English : Attach the parabolic dish to the stand using the wrenches.



Step 4 - Préparation du support du plat /Preparation of the plate support

Français : Utilisez la partie de la parabole en métal qui permet de fixer l'angle afin d'adapter l'orientation du plat avec celle de la parabole en visant le point focal qui nous permettra la cuisson. On avait besoin de deux entretoises pour serrer la barre contre le support afin de changer l'angle d'inclinaison du plat et l'ajuster avec l'angle du support de la surface parabolique. Une tôle métallique pliée (en se servant d'un étau) également a été utilisée afin de fixer la barre sur la parabole.

English : Use the metal part of the parabolic dish that allows you to adjust the angle to align the plate's orientation with that of the parabolic dish by aiming at the focal point that will allow us to cook. We needed two spacers to tighten the bar against the stand in order to change the angle of inclination of the plate and adjust it with the angle of the parabolic surface stand. A bent metal sheet (using a vise) was also used to secure the bar on the parabolic dish.


Step 5 - Fixation de la grille / Grid attachment

Français : Découpez la grille de la taille qui vous convient et fixez la à l'aide des fils de cuivre.

English : Cut the grid to the desired size and secure it using copper wires.


Notes and references

Français : L'utilisation d'un four concentré solaire comporte certaines précautions pour garantir la sécurité des personnes et des équipements

  • Rayonnement intense : La lumière solaire concentrée peut produire des niveaux dangereux de rayonnement ultraviolet et infrarouge, il est donc important de prendre des mesures de protection pour les yeux et la peau, telles que des lunettes de protection et des vêtements de protection.
  • Équipements : Les équipements utilisés pour concentrer la lumière solaire, tels que les films à effet miroir, doivent être inspectés régulièrement pour s'assurer qu'ils sont en bon état et qu'ils fonctionnent correctement.

English : Safety Precautions when using a Solar Concentrated Oven

  • Intense Radiation: The concentrated solar light can produce dangerous levels of ultraviolet and infrared radiation, so it is important to take protective measures for the eyes and skin, such as protective glasses and protective clothing.
  • Equipment: The equipment used to concentrate solar light, such as mirror effect films, must be regularly inspected to ensure that they are in good condition and functioning properly.

Comments

Published