Hand washing machine

low tech & refugiés

https://wiki.lowtechlab.org/wiki/Machine_%C3%A0_laver_%C3%A0_la_main/en

Dernière modification le 16/08/2024

Difficulté

Easy Facile

Durée

30 minute(s) minute(s)

Coût

2 EUR (€)

Description

Making a washing machine by hand.

Sommaire

machine à laver, recyclage, lave linge, ventouse, manuel

---

Introduction

THE NEED

L'accès à une machine à laver répond à un besoin d‘ordre hygiénique et sanitaire. C’est un outil rare dans les camps tant certains individus possèdent peu de vêtements ou de sous-vêtements, et peut aussi particulièrement profiter à certaines populations (enfants en bas âge, bambins...).

Cette machine simple et efficace peut faciliter le nettoyage du linge dans des espaces où il est parfois très difficile d‘avoir accès à cette commodité.

ACCESSIBILY

Making this washing machine is affordable financially, technically and materially. It requires very few materials, and most of them can be recycled materials (buckets, rope, plastic bottles, used inner tubes).

The purchase of these materials, if they are not recycled, is also fairly low.

THE RESPECT

The manual washing machine is very environmentally friendly, as it needs no electricity to operate, emits no CO2 and requires very little water - potable or non-potable - to function. As for its manufacture, the use of recycled materials helps to reduce environmental waste. What's more, you can limit the ecological impact of its use by making natural detergents from ash, for example.

Matériaux

2 Buckets

1 suction cup

Outils

1 drill

1 saw

1 stapler

Étape 1 - Step 1 - Sawing the buckets/barrels.

Saw off the top of the bucket/barrel that will make up bucket n1 (black): the washing machine drum.

Saw off the second bucket/barrel (Bucket 2 - Yellow) to allow the drum to fit inside the second seal.

For a better finish, sand the cut ends.

Étape 2 - Step 2 - Drill holes in the inner bucket - or bucket 1

Drill holes in one of the buckets (bucket 1 - which will hold the washing). On the sides and bottom of the bucket.

This will improve laundry cleaning by facilitating the movement of water and soap, and will make spin-drying easier.

Étape 3 - Step 3 - Drilling holes in the suction cup

Use the drill to make holes in the suction cup. This will improve the cleaning of the laundry.

Étape 4 - Step 4 - Waterproofing the washing machine

Cover the outer bucket with a used inner tube, cut lengthways. You can use staples or glue it in place.

It's important to stretch the inner tube tightly along the lid of the washing machine.

This will ensure a better seal and prevent splashes.

Étape 5 - Step 5 - Cut a circle in the centre of the lid of the bucket.

Cut a circle in the centre of the lid of the outer bucket (bucket 2). The circle should be wide enough to allow the suction cup handle to move freely.

Étape 6 - Step 6 - Adding rope to bucket 1

Add a rope to bucket 1. This will make it easier to hold and spin.

Étape 7 - Step 7 - Use

To use the washing machine, fill bucket no. 1 (black) with the clothes you want to wash, then add water and detergent (if possible, eco-friendly detergent such as ash), insert the suction cup and close the lid. Fold the inner tube over the tub and pump with the suction pad for a few minutes.

After pumping to wash the clothes, remove bin no. 1 (black) containing the clothes and empty the water from bin no. 2 (yellow). Put bin no. 1 containing the clothes back in and add clean water. Repeat the process.

Pour essorer les vêtements sortir le bac n°1 (noir) et accrocher la corde à un crochet. Faire tourner sur lui même le bac pour évacuer l'eau.

en fr 1 Published