فراش منخفض التقنية (low-tech)

Tutorial de avatarLow-tech with Refugees - Low-tech & Réfugiés | Catégories : Habitat

إنشاء فراش عازل ومدمج ومضغوط ومقاوم للماء ومريح. يمكن صنع الفراش من مواد معاد تدويرها. Creation of an insulating, compact, waterproof and comfortable mattress. The mattress can be made from recycled materials

Licence : Attribution (CC BY)

Introduction

صنع فراش


Making a mattress

Matériaux

قماش مشمع : فلاحي

غلاف فقاعي : شركة نقل

الحبل


غطاء مشمع : مزراع

Bubble wrap: moving company

Rope

Outils

علبة صودا أو علبة ألومنيوم

Chalumeau

شعلة


Can of Soda

Torch

Rectangular piece of wood

Étape 1 - تركيب الغلاف الفقاعي في القماش المشمع

تمديد القماش المشمع فوق طاولة

ضع عدة طبقات من غلاف الفقاعات* لتشكيل مستطيل مضغوط.

يمكن استبدال غلاف الفقاعات بمواد مختلفة مثل البطانيات، لكن غلاف الفقاعات مقاوم للماء وخفيف للغاية.


Stretch the tarpaulin on a table


Place several layers of bubble wrap * to form a compact rectangle


bubble wrap can be replaced by different materials such as blankets, however bubble wrap is water resistant and very light




Étape 2 - قم بطي القماش المشمع على نفسه

قم بتغطية الغلاف الفقاعي بالجزء الآخر من القماش المشمع بحيث لا يعود الغلاف الفقاعي مرئياً.

Cover the bubble wrap with the other part of the tarpaulin so that the bubble wrap can no longer be seen.





Étape 3 - تُطوى جوانب القماش المشمع.

اطوِ جوانب القماش المشمع لعمل اللحامات


Fold the sides of the sheet to be able to make the welds




Étape 4 - التلحيم

- ضع طية القماش المشمع في العلبة المطوية وضع قطعة الخشب لتثبيتها معاً.


- تُسخن العلبة بالكامل بموقد اللحام لمدة 30 ثانية

La canette doit être pliée comme une feuille de papier

Faire attention à ne pas chauffer la bache directement avec le chalumeau


- Appliquer une pression avec le bout de bois sur la canette afin de finaliser la soudure pendant environ 30 secondes


- Décoler la canette délicatement


- Réaliser cette étape et la précédente autant que nécessaire sur l'ensemble des contours du matelas

- Put the fold of the tarpaulin in the folded can and place the piece of wood in order to hold the whole.

- Heat the entire can with the torch for 30 seconds

The bobbin should be folded like a sheet of paper

Be careful not to heat the tarpaulin directly with the torch

- Apply pressure with the piece of wood on the can to finalize the weld for about 30 seconds

- Peel off the can delicately

- Perform this step and the previous one as much as necessary on all the contours of the mattress


Étape 5 - Bonus

Vous avez votre matelas !!!


Vous pouvez le rouler sur lui-même et le maintenir avec une corde

You have your mattress !!!

You can roll it up and hold it with a rope



Notes et références


Commentaires

Draft