Translations:Lampe solaire à batteries lithium récupérées/281/en : Différence entre versions

Version actuelle datée du 14 février 2020 à 12:53

Place the panel on the bigger board, mark the position of the + and - outputs of the pannel and drill a hole of 5mm in both boards. (If any component is already in this place, the hole should be moved).

Version du 14 février 2020 à 12:41 (voir la source) GoldofBengal (discussion \| contributions) (Page créée avec « Place the panel on the bigger board, mark the position of the + and - outputs of the pannel and drill a hole of 5mm in both boards. (If any component is already in this pl... »)		Version actuelle datée du 14 février 2020 à 12:53 (voir la source) GoldofBengal (discussion \| contributions)
Ligne 1 :		Ligne 1 :
−	Place the panel on the bigger board, mark the position of the + and - outputs of the pannel and drill a hole of 5mm in both boards. (If any component is already in this place, the hole should be moved).	+	*Place the panel on the bigger board, mark the position of the + and - outputs of the pannel and drill a hole of 5mm in both boards. (If any component is already in this place, the hole should be moved).