Translations:Lampe solaire à batteries lithium récupérées/243/en : Différence entre versions

Version du 12 février 2020 à 17:23

Heat slowly with a thermal stripper each side of the cuboid. The stripper should be approximately 10 cm far from the bottle. Once the bottle obtains the same shape than the mold, continue to heat in order to erase the bottle patterns and to strech the plastic properly.

Version du 12 février 2020 à 16:50 (voir la source) GoldofBengal (discussion \| contributions) (Page créée avec « Heat slowly with a thermal stripper each side of the cuboid. The stripper should be around 10 cm far from the bottle. Once the bottle obtains the same shape than the mold,... »)		Version du 12 février 2020 à 17:23 (voir la source) GoldofBengal (discussion \| contributions) Modification suivante →
Ligne 1 :		Ligne 1 :
−	Heat slowly with a thermal stripper each side of the cuboid. The stripper should be ~~around~~ 10 cm far from the bottle. Once the bottle obtains the same shape than the mold, continue to heat in order to erase the bottle patterns and to strech the plastic properly.	+	Heat slowly with a thermal stripper each side of the cuboid. The stripper should be approximately 10 cm far from the bottle. Once the bottle obtains the same shape than the mold, continue to heat in order to erase the bottle patterns and to strech the plastic properly.