Linogravure/en

Low-tech with Refugees - Low-tech & Réfugiés

https://wiki.lowtechlab.org/wiki/Linogravure/en

Dernière modification le 08/02/2023

Difficulté

Hard Difficile

Durée

3 hour(s) heure(s)

Coût

15 EUR (€)

Description

Linocut (wooden stamp for t-shirt)

Sommaire

---

Introduction

Tutorial T-shirt printing

Instructions in French:

During this tutorial, we are going to explain how to print words on your clothes or your paper sheets using the lino printing technique. We will make a wooden alphabet, to then print any word with painting on the choosen surface.

__________________________________________________________________________________________________________________________________________________________________________________________________

Tutorial T-shirt printing

Instructions in english:

During this tutorial, we are going to explain how to print words on your clothes or your paper sheets using the lino printing technique. We will make a wooden alphabet, to then print any word with painting on the choosen surface.

__________________________________________________________________________________________________________________________________________________________________________________________________

برنامج تعليمي لطباعة القمصان

في هذا البرنامج التعليمي ، سنشرح كيفية طباعة الكلمات على مواد النسيج أو الأوراق باستخدام تقنية لينوكوت. لذلك سنقوم بنحت أبجدية خشبية ثم نقوم بطباعة الكلمة المرغوبة بالطلاء على الدعامة المختارة.

====

====

1. 
2. 
3. 
4. 
5. 
6. 

Matériaux

Wood

Paint

Cloth or Paper

Outils

Pen

Brush

Wood chisel

File

Étape 1 - Collect Fabric

Collect the fabric you want to customize.

_____________________________________________________________________________________

Collect the fabric you want to customize.

_____________________________________________________________________________________

اجمعوا القماش

Étape 2 - Prepare the wooden plaque

1.) With a pencil, write up the letter on the plaque making sure that the letter, are back to front (therefore making a mirror copy) so that when you print it will come out the right way around.

2.)Use graving tools to carve around the letters. N.B: when you print the areas cut out will not take the paint (they will stay the same colour as the t-shirt).

_____________________________________________________________________________________

1) With a pencil, write up the letter on the plaque making sure that the letter, are back to front (therefore making a mirror copy) so that when you print it will come out the right way around.

2)Use graving tools to carve around the letters. N.B: when you print the areas cut out will not take the paint (they will stay the same colour as the t-shirt).

_____________________________________________________________________________________

١-بواسطة قلم اكتبوا الحرف بالجهة المعاكسة

٢-استخدموا الة النحت للنحت حول الحرف

Étape 3 - Print

1) Place a sheet of cardboard under or inside your fabric to separate the front and back.

2) Use a brush to put the paint on the stamp (on the embossed letter).

3) Turn the stamp over and press it onto the t-shirt. Hold the pressure for a few seconds. Turn the stamp over and press it on the t-shirt. Hold the pressure for a few seconds

_____________________________________________________________________________________

1.) Place a sheet of cardboard under or inside your fabric to separate the front and back.

2.) Use a brush to put the paint on the stamp (on the embossed letter).

3) Turn the stamp over and press it onto the t-shirt. Hold the pressure for a few seconds. Turn the stamp over and press it on the t-shirt. Hold the pressure for a few seconds

_____________________________________________________________________________________

١-نضع ورقة الكرتون على او داخل القماش

٢-استخدام الريشة للدهن

٣-نقلب بالجهة المعاكسة

Étape 4 - Peel away

Peel away the plaque from the t-shirt and leave to dry for 24 hours.

_____________________________________________________________________________________

Peel away the plaque from the t-shirt and leave to dry for 24 hours.

_____________________________________________________________________________________

نتركه ينشف ل ٢٤ ساعة

Étape 5 - Repeat

Repeat this process with all the recovered fabrics before thoroughly washing all the equipment (pad, brush, etc.).

_____________________________________________________________________________________

Repeat this process with all the recovered fabrics before thoroughly washing all the equipment (pad, brush, etc.).

_____________________________________________________________________________________

اعادة العملية مع باقي قطع القماش

Notes et références

To watch some tutorials and to learn more about the process, you can watch these videos linked below:

https://www.youtube.com/watch?v=Un2DUWn3FLE

https://www.youtube.com/watch?v=HHnQuFxtuQ0

https://www.youtube.com/watch?v=r2hYUxFOHEM

Link to by a roller : https://www.google.com/search?q=rouleau+lino+impression&rlz=1C5CHFA_enGB876GB876&source=lnms&tbm=shop&sa=X&ved=2ahUKEwiK5tTs0__5AhWJx4UKHalDBR0Q_AUoAnoECAEQBA&biw=1396&bih=708&dpr=2#spd=13900926477625390458

__________________________________________________________________________________________________________________________________________________________________________________________________

To watch some tutorials and to learn more about the process, you can watch these videos linked below:

https://www.youtube.com/watch?v=Un2DUWn3FLE

https://www.youtube.com/watch?v=HHnQuFxtuQ0

https://www.youtube.com/watch?v=r2hYUxFOHEM

en fr 1 Draft