Translations:Hydroponie/6/en : Différence entre versions

Ligne 22 : Ligne 22 :
 
* 10L Clay beads  
 
* 10L Clay beads  
 
* 40L of water  
 
* 40L of water  
{{In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square metre of cultivation. }}
+
{{In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation. }}
 
4. Control system
 
4. Control system
 
* Socket outlet with programmable timer or Arduino
 
* Socket outlet with programmable timer or Arduino

Version du 3 septembre 2019 à 10:41

Informations concernant le message (contribuer)
Ce message n’est pas documenté. Si vous savez où ou comment il est utilisé, vous pouvez aider les autres traducteurs en créant sa documentation.
Définition du message (Hydroponie)
1. Gouttières de cultures
Traduction1. Crop gutters
((* Cleats (minimum width 10cm))
* Plastic sheeting
* Staples
* Clay beads
{{Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots
}}
* Brackets
* Wood screws
* Young shoots and cuttings
2. Irrigation system
* 1 Submersible pump (aquarium pump)
* 5 m of thin plastic pipe (pump outlet)
* 1 End cap with 4 outlets for fine pipe
* 50 cm of wide plastic tube (Link between the filter and the bio-filter)
* 1 Wide pipe end cap (to be fixed on the filter tank)
* 1 Blower
3. Filter and bio-filter
* 2 plastic bins of 60L 
* Large gravel 
* Sand
* 10L Clay beads 
* 40L of water 
{{In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation. }}
4. Control system
* Socket outlet with programmable timer or Arduino

1. Crop gutters ((* Cleats (minimum width 10cm))

  • Plastic sheeting
  • Staples
  • Clay beads

Modèle:Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots

  • Brackets
  • Wood screws
  • Young shoots and cuttings

2. Irrigation system

  • 1 Submersible pump (aquarium pump)
  • 5 m of thin plastic pipe (pump outlet)
  • 1 End cap with 4 outlets for fine pipe
  • 50 cm of wide plastic tube (Link between the filter and the bio-filter)
  • 1 Wide pipe end cap (to be fixed on the filter tank)
  • 1 Blower

3. Filter and bio-filter

  • 2 plastic bins of 60L
  • Large gravel
  • Sand
  • 10L Clay beads
  • 40L of water

Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square meter of cultivation. 4. Control system

  • Socket outlet with programmable timer or Arduino