| Ligne 4 : | Ligne 4 : | ||
* Staples | * Staples | ||
* Clay beads | * Clay beads | ||
| − | Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots | + | {{Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots |
}} | }} | ||
* Brackets | * Brackets | ||
| Ligne 22 : | Ligne 22 : | ||
* 10L Clay beads | * 10L Clay beads | ||
* 40L of water | * 40L of water | ||
| − | In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square metre of cultivation. }} | + | {{In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square metre of cultivation. }} |
4. Control system | 4. Control system | ||
* Socket outlet with programmable timer or Arduino | * Socket outlet with programmable timer or Arduino | ||
Version du 27 mai 2019 à 09:05
1. Crop gutters ((* Cleats (minimum width 10cm))
- Plastic sheeting
- Staples
- Clay beads
- Brackets
- Wood screws
- Young shoots and cuttings
2. Irrigation system
- 1 Submersible pump (aquarium pump)
- 5 m of thin plastic pipe (pump outlet)
- 1 End cap with 4 outlets for fine pipe
- 50 cm of wide plastic tube (Link between the filter and the bio-filter)
- 1 Wide pipe end cap (to be fixed on the filter tank)
- 1 Blower
3. Filter and bio-filter
- 2 plastic bins of 60L
- Large gravel
- Sand
- 10L Clay beads
- 40L of water
Modèle:In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square metre of cultivation. 4. Control system
- Socket outlet with programmable timer or Arduino
Français
English
Deutsch
Español
Italiano
Português