Cuiseur solaire parabolique/en : Différence entre versions

(Page créée avec « The solar concentrated oven is a device that uses a mirror-effect surface to concentrate solar light onto a very narrow focal point. This focal point can reach extremely h... »)
(Mise à jour pour être en accord avec la nouvelle version de la source de la page)
 
(37 révisions intermédiaires par 2 utilisateurs non affichées)
Ligne 15 : Ligne 15 :
 
{{Introduction
 
{{Introduction
 
|Introduction=The solar concentrated oven is a device that uses a mirror-effect surface to concentrate solar light onto a very narrow focal point. This focal point can reach extremely high temperatures, up to several thousand degrees Celsius, making it a very powerful tool for producing thermal energy.
 
|Introduction=The solar concentrated oven is a device that uses a mirror-effect surface to concentrate solar light onto a very narrow focal point. This focal point can reach extremely high temperatures, up to several thousand degrees Celsius, making it a very powerful tool for producing thermal energy.
−
 
 
Concentrated solar ovens are considered a clean and sustainable energy source that can replace conventional energy sources such as fossil fuels.
 
Concentrated solar ovens are considered a clean and sustainable energy source that can replace conventional energy sources such as fossil fuels.
  
−
<!--E-->
+
<br />
−
English :
 
−
The solar concentrated oven is a device that uses a mirror-effect surface to concentrate solar light onto a very narrow focal point. This focal point can reach extremely high temperatures, up to several thousand degrees Celsius, making it a very powerful tool for producing thermal energy.
 
−
Concentrated solar ovens are considered a clean and sustainable energy source that can replace conventional energy sources such as fossil fuels.
 
 
}}
 
}}
 
{{Materials
 
{{Materials
Ligne 31 : Ligne 27 :
 
|Step_Picture_05=Four_parabolique_903463bbf2de0d22846b282f8939f87e4ea1b3c4.jpg
 
|Step_Picture_05=Four_parabolique_903463bbf2de0d22846b282f8939f87e4ea1b3c4.jpg
 
|Step_Picture_05_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":0,"top":79,"width":360,"height":800,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1.67,"scaleY":1.67,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/0/0a/Four_parabolique_903463bbf2de0d22846b282f8939f87e4ea1b3c4.jpg","filters":[]}],"height":1332,"width":600}
 
|Step_Picture_05_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":0,"top":79,"width":360,"height":800,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1.67,"scaleY":1.67,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/0/0a/Four_parabolique_903463bbf2de0d22846b282f8939f87e4ea1b3c4.jpg","filters":[]}],"height":1332,"width":600}
−
|Material=Français :
+
|Material=<br />
−
*Deux paraboles avec support
 
−
*Un support avec des roues
 
−
*Une grille
 
−
*Des vis
 
−
*Un film à effet mirroir
 
−
 
 
−
English :
 
  
 
*Two parabolic reflectors with support
 
*Two parabolic reflectors with support
Ligne 45 : Ligne 34 :
 
*Screws
 
*Screws
 
*A mirror effect film
 
*A mirror effect film
−
|Tools=Français :
+
|Tools=<br />
−
*Perceuse sans fil
 
−
*Ciseau
 
−
*Marteau
 
−
*Clé de serrage
 
−
*Pince
 
−
*Outils de mesure
 
−
*Etau
 
−
*Entretoises
 
−
*Fils de cuivre
 
  
−
English :
 
 
*Wireless drill
 
*Wireless drill
 
*Scissors
 
*Scissors
Ligne 68 : Ligne 47 :
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
−
|Step_Title=Préparation du support roulant / Preparation of the rolling stand
+
|Step_Title= Preparation of the rolling stand
−
|Step_Content=Français :
+
|Step_Content=Use a rolling table, with a rectangular sheet that needs to be fixed with a drill and screws on the stand to place the tube that will support the parabolic dish later.
−
<!--F-->
 
−
Utilisez une table roulante , avec une tôle rectangulaire qu'il faut fixer à l'aide d'une perceuse et des vis sur le support pour poser le tube qui portera la parabole par la suite.
 
−
 
 
−
English :
 
−
<!--F-->
 
−
Use a rolling table, with a rectangular sheet that needs to be fixed with a drill and screws on the stand to place the tube that will support the parabolic dish later.
 
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_12.17.07.jpeg
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_12.17.07.jpeg
 
|Step_Picture_00_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":24,"top":-60,"width":1200,"height":1600,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.46,"scaleY":0.46,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/1/17/Four_parabolique_WhatsApp_Image_2023-01-26_at_12.17.07.jpeg","filters":[]}],"height":600,"width":600}
 
|Step_Picture_00_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":24,"top":-60,"width":1200,"height":1600,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.46,"scaleY":0.46,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/1/17/Four_parabolique_WhatsApp_Image_2023-01-26_at_12.17.07.jpeg","filters":[]}],"height":600,"width":600}
Ligne 84 : Ligne 57 :
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
−
|Step_Title=Pose du film à effet mirroir sur la parabole / Placement of the mirror film on the parabolic dish
+
|Step_Title=Placement of the mirror film on the parabolic dish
−
|Step_Content=Français :
+
|Step_Content=Stick the mirror film onto the entire surface of the parabolic dish by cutting it into small pieces to prevent bubbles from forming.
−
<!--F-->
 
−
Collez le film à effet mirroir sur toute la surface de la parabole en le découpant en petits morceaux  pour éviter que des bulles ne se forment.
 
−
 
 
−
English :
 
−
<!--F-->
 
−
Stick the mirror film onto the entire surface of the parabolic dish by cutting it into small pieces to prevent bubbles from forming.
 
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.37.56_2_.jpeg
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.37.56_2_.jpeg
 
|Step_Picture_01=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.37.57.jpeg
 
|Step_Picture_01=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.37.57.jpeg
Ligne 97 : Ligne 64 :
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
−
|Step_Title=Fixation de la parabole sur le support / Attachment of the parabolic dish to the stand
+
|Step_Title=Attachment of the parabolic dish to the stand
−
|Step_Content=Français :
+
|Step_Content= Attach the parabolic dish to the stand using the wrenches
−
<!--F-->
 
−
Fixer la parabole sur le support à l'aide des clés de serrage.
 
  
−
English :
+
<br />
−
<!--F-->
 
−
Attach the parabolic dish to the stand using the wrenches.
 
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.37.59.jpeg
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.37.59.jpeg
 
|Step_Picture_01=Four_parabolique_WhatsApp_Image_2023-01-26_at_12.36.05.jpeg
 
|Step_Picture_01=Four_parabolique_WhatsApp_Image_2023-01-26_at_12.36.05.jpeg
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
−
|Step_Title=Préparation du support du plat /Preparation of the plate support
+
|Step_Title=Preparation of the plate support
−
|Step_Content=Français :
+
|Step_Content=Use the metal part of the parabolic dish that allows you to adjust the angle to align the plate's orientation with that of the parabolic dish by aiming at the focal point that will allow us to cook.
−
<!--F-->
 
−
Utilisez la partie de la parabole en métal qui permet de fixer l'angle afin d'adapter l'orientation du plat avec celle de la parabole en visant le point focal qui nous permettra la cuisson.
 
−
On avait besoin de deux entretoises pour serrer la barre contre le support afin de changer l'angle d'inclinaison du plat et l'ajuster avec l'angle du support de la surface parabolique.
 
−
Une tôle métallique pliée (en se servant d'un étau) également a été utilisée afin de fixer la barre sur la parabole.
 
−
 
 
−
English :
 
−
<!--F-->
 
−
Use the metal part of the parabolic dish that allows you to adjust the angle to align the plate's orientation with that of the parabolic dish by aiming at the focal point that will allow us to cook.
 
 
We needed two spacers to tighten the bar against the stand in order to change the angle of inclination of the plate and adjust it with the angle of the parabolic surface stand.
 
We needed two spacers to tighten the bar against the stand in order to change the angle of inclination of the plate and adjust it with the angle of the parabolic surface stand.
 
A bent metal sheet (using a vise) was also used to secure the bar on the parabolic dish.
 
A bent metal sheet (using a vise) was also used to secure the bar on the parabolic dish.
 +
 +
<br />
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16.jpeg
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16.jpeg
 
|Step_Picture_01=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16_4_.jpeg
 
|Step_Picture_01=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16_4_.jpeg
 
|Step_Picture_02=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16_5_.jpeg
 
|Step_Picture_02=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16_5_.jpeg
 
|Step_Picture_03=Four_parabolique_WhatsApp_Image_2023-01-26_at_12.43.53.jpeg
 
|Step_Picture_03=Four_parabolique_WhatsApp_Image_2023-01-26_at_12.43.53.jpeg
 +
|Step_Picture_04=Cuiseur_solaire_parabolique_WhatsApp_Image_2023-02-07_at_16.48.59.jpeg
 +
|Step_Picture_05=Cuiseur_solaire_parabolique_WhatsApp_Image_2023-02-07_at_16.49.00.jpeg
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
−
|Step_Title=Fixation de la grille / Grid attachment
+
|Step_Title=Grid attachment
−
|Step_Content=Français :
+
|Step_Content= Cut the grid to the desired size and secure it using copper wires.
−
<!--F-->
 
−
Découpez la grille de la taille qui vous convient et fixez la à l'aide des fils de cuivre.
 
  
−
English :
+
<br />
−
<!--F-->
 
−
Cut the grid to the desired size and secure it using copper wires.
 
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16_2_.jpeg
 
|Step_Picture_00=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16_2_.jpeg
 
|Step_Picture_01=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16_3_.jpeg
 
|Step_Picture_01=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.49.16_3_.jpeg
 
|Step_Picture_02=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.38.04.jpeg
 
|Step_Picture_02=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.38.04.jpeg
 
|Step_Picture_03=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.38.04.jpeg
 
|Step_Picture_03=Four_parabolique_WhatsApp_Image_2023-01-26_at_11.38.04.jpeg
 +
|Step_Picture_04=Cuiseur_solaire_parabolique_WhatsApp_Image_2023-02-06_at_17.22.05.jpeg
 +
|Step_Picture_04_annotation={"version":"3.5.0","objects":[{"type":"image","version":"3.5.0","originX":"left","originY":"top","left":-322,"top":-278,"width":720,"height":1280,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":2.16,"scaleY":2.16,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://wiki.lowtechlab.org/images/9/92/Cuiseur_solaire_parabolique_WhatsApp_Image_2023-02-06_at_17.22.05.jpeg","filters":[]}],"height":1066.1157024793388,"width":600}
 
}}
 
}}
 
{{Notes
 
{{Notes
−
|Notes=Français :
+
|Notes=Safety Precautions when using a Solar Concentrated Oven
−
<!--F-->
 
−
L'utilisation d'un four concentré solaire comporte '''certaines précautions''' pour garantir la sécurité des personnes et des équipements
 
−
* Rayonnement intense : La lumière solaire concentrée peut produire des niveaux dangereux de rayonnement ultraviolet et infrarouge, il est donc important de prendre des mesures de protection pour les yeux et la peau, telles que des lunettes de protection et des vêtements de protection.
 
−
* Équipements : Les équipements utilisés pour concentrer la lumière solaire, tels que les films à effet miroir, doivent être inspectés régulièrement pour s'assurer qu'ils sont en bon état et qu'ils fonctionnent correctement.
 
  
−
English :
+
*Intense Radiation: The concentrated solar light can produce dangerous levels of ultraviolet and infrared radiation, so it is important to take protective measures for the eyes and skin, such as protective glasses and protective clothing.
−
<!--F-->
+
*Equipment: The equipment used to concentrate solar light, such as mirror effect films, must be regularly inspected to ensure that they are in good condition and functioning properly.
−
Safety Precautions when using a Solar Concentrated Oven
 
−
* Intense Radiation: The concentrated solar light can produce dangerous levels of ultraviolet and infrared radiation, so it is important to take protective measures for the eyes and skin, such as protective glasses and protective clothing.
 
−
* Equipment: The equipment used to concentrate solar light, such as mirror effect films, must be regularly inspected to ensure that they are in good condition and functioning properly.
 
 
}}
 
}}
 
{{PageLang
 
{{PageLang

Version actuelle datée du 7 février 2023 à 16:51

Tutorial de avatarLow-tech with Refugees - Low-tech & Réfugiés | Catégories : Alimentation, Énergie, Outils

avatarLow-tech with Refugees - Low-tech & Réfugiés

https://wiki.lowtechlab.org/wiki/Cuiseur_solaire_parabolique/en
Dernière modification le 07/02/2023


Difficulté
Moyen
Durée
3 heure(s)
Coût
13 EUR (€)

Description

The parabolic or concentrated oven consists of a parabolic-shaped reflector. Its shiny mirror-effect surface captures the sun's rays, concentrates them, and then reflects them onto the cooking surface located on the grid.

The parabolic or concentrated oven consists of a parabolic-shaped reflector. Its shiny mirror-effect surface captures the sun's rays, concentrates them, and then reflects them onto the cooking surface located on the grid.

Difficulté
Moyen
Durée
3 heure(s)
Coût
13 EUR (€)
Autres langues :
English • ‎español • ‎français • ‎العربية

Sommaire

Licence : Attribution (CC BY)

Introduction

The solar concentrated oven is a device that uses a mirror-effect surface to concentrate solar light onto a very narrow focal point. This focal point can reach extremely high temperatures, up to several thousand degrees Celsius, making it a very powerful tool for producing thermal energy. Concentrated solar ovens are considered a clean and sustainable energy source that can replace conventional energy sources such as fossil fuels.


Matériaux


  • Two parabolic reflectors with support
  • A support with wheels
  • A grid
  • Screws
  • A mirror effect film

Outils


  • Wireless drill
  • Scissors
  • Hammer
  • Wrench
  • Pliers
  • Measuring tools
  • Vice
  • Spacers
  • Copper wire

Étape 1 - Preparation of the rolling stand

Use a rolling table, with a rectangular sheet that needs to be fixed with a drill and screws on the stand to place the tube that will support the parabolic dish later.


Étape 2 - Placement of the mirror film on the parabolic dish

Stick the mirror film onto the entire surface of the parabolic dish by cutting it into small pieces to prevent bubbles from forming.

Four parabolique WhatsApp Image 2023-01-26 at 11.37.56 2 .jpeg
Four parabolique WhatsApp Image 2023-01-26 at 11.37.57.jpeg
Four parabolique WhatsApp Image 2023-01-26 at 11.37.58 1 .jpeg


Étape 3 - Attachment of the parabolic dish to the stand

Attach the parabolic dish to the stand using the wrenches


Four parabolique WhatsApp Image 2023-01-26 at 11.37.59.jpeg
Four parabolique WhatsApp Image 2023-01-26 at 12.36.05.jpeg



Étape 4 - Preparation of the plate support

Use the metal part of the parabolic dish that allows you to adjust the angle to align the plate's orientation with that of the parabolic dish by aiming at the focal point that will allow us to cook. We needed two spacers to tighten the bar against the stand in order to change the angle of inclination of the plate and adjust it with the angle of the parabolic surface stand. A bent metal sheet (using a vise) was also used to secure the bar on the parabolic dish.


Four parabolique WhatsApp Image 2023-01-26 at 11.49.16.jpeg
Four parabolique WhatsApp Image 2023-01-26 at 11.49.16 4 .jpeg
Four parabolique WhatsApp Image 2023-01-26 at 11.49.16 5 .jpeg
Four parabolique WhatsApp Image 2023-01-26 at 12.43.53.jpeg
Cuiseur solaire parabolique WhatsApp Image 2023-02-07 at 16.48.59.jpeg
Cuiseur solaire parabolique WhatsApp Image 2023-02-07 at 16.49.00.jpeg

Étape 5 - Grid attachment

Cut the grid to the desired size and secure it using copper wires.


Four parabolique WhatsApp Image 2023-01-26 at 11.49.16 2 .jpeg
Four parabolique WhatsApp Image 2023-01-26 at 11.49.16 3 .jpeg
Four parabolique WhatsApp Image 2023-01-26 at 11.38.04.jpeg
Four parabolique WhatsApp Image 2023-01-26 at 11.38.04.jpeg

Notes et références

Safety Precautions when using a Solar Concentrated Oven

  • Intense Radiation: The concentrated solar light can produce dangerous levels of ultraviolet and infrared radiation, so it is important to take protective measures for the eyes and skin, such as protective glasses and protective clothing.
  • Equipment: The equipment used to concentrate solar light, such as mirror effect films, must be regularly inspected to ensure that they are in good condition and functioning properly.

Commentaires

Published

Récupérée de « https://wiki.lowtechlab.org/w/index.php?title=Cuiseur_solaire_parabolique/en&oldid=90839 »
© 2017 - 2024 Dokit, SAS.