| (23 révisions intermédiaires par le même utilisateur non affichées) | |||
| Ligne 2 : | Ligne 2 : | ||
|Main_Picture=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_13.53.49.png | |Main_Picture=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_13.53.49.png | ||
|Licences=Attribution (CC BY) | |Licences=Attribution (CC BY) | ||
| − | |Description=Building an insulated | + | |Description=Building an insulated mattress from salvage life jackets' foams |
|Area=Habitat, Health | |Area=Habitat, Health | ||
|Type=Tutorial | |Type=Tutorial | ||
| Ligne 13 : | Ligne 13 : | ||
}} | }} | ||
{{Introduction | {{Introduction | ||
| − | |Introduction= | + | |Introduction=NEEDED : |
| Ligne 22 : | Ligne 22 : | ||
| − | Made from life | + | Made from life jackets' foam which can be easily fund here, these mattresses permit to disminish the material pollution on the island. The survival blankets and plastic tarpaulin wraping the mattress, even if not coming from salvage, enable to improve the insulate and waterproof aspects of the mattress against humidity. Facing the emergency of the situation and the time imperative, we could not sew an insulating tarpaulin, which for example could have been made with the inflatable dinghy's fabrick stored on the island . |
}} | }} | ||
{{Materials | {{Materials | ||
| Ligne 29 : | Ligne 29 : | ||
2 survival blankets | 2 survival blankets | ||
| − | Plastic tarpaulin (could be replaced by a sewed | + | Plastic tarpaulin (could be replaced by a sewed tarpaulin made from inflatable dinghy's fabric ) |
| − | + | Adhesive tape | |
<br /> | <br /> | ||
| − | |Tools= | + | |Tools=Scissors/utility knife |
| − | + | Heating gun | |
| − | + | Gloves | |
|Tuto_Attachments={{Tuto Attachments | |Tuto_Attachments={{Tuto Attachments | ||
|Attachment=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.20.46.png | |Attachment=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.20.46.png | ||
| Ligne 44 : | Ligne 44 : | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
| − | |Step_Title= | + | |Step_Title=Cut the foam from the life jackets |
| − | |Step_Content= | + | |Step_Content=It consists of removing the foam inside the life jackets using scissors or an utility knife. |
|Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.19.51.png | |Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.19.51.png | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
| − | |Step_Title= | + | |Step_Title=Assemble the foam pieces |
| − | |Step_Content= | + | |Step_Content=To assemble the pieces, use the heating gun to melt a little bit the foam before sticking it on another piece of foam. The goal is to achieve some kind of foam patchwork with the size wanted |
| − | + | For example it is possible to realize a big mattress covering entirely the floor of a tent. | |
|Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.09.19.png | |Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.09.19.png | ||
|Step_Picture_01=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.10.00.png | |Step_Picture_01=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.10.00.png | ||
| Ligne 59 : | Ligne 59 : | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
| − | |Step_Title= | + | |Step_Title=Roll the foam with survival blankets |
| − | |Step_Content= | + | |Step_Content=To insulate the foam at best, you need to roll it using survival blankets. So as to do that, use adhesive tape to attach the blankets on both sides of the foam. |
| − | + | "NB: It is better to use the aluminium side on top so as to reflect the body's heat." | |
|Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.15.08.png | |Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.15.08.png | ||
|Step_Picture_01=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.17.20.png | |Step_Picture_01=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.17.20.png | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
| − | |Step_Title= | + | |Step_Title=Cover with a plastic tarpaulin |
| − | |Step_Content= | + | |Step_Content=Cover the whole mattress with a plastic tarpaulin to avoid water and humidity to penetrate inside. Attach it again using adhesive tape. |
|Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_13.53.49.png | |Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_13.53.49.png | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
| − | |Step_Title= | + | |Step_Title=Use |
| − | |Step_Content= | + | |Step_Content=The mattress is above the wooden pallet and the tent canvas. Foldable and pretty light, it can be transported easily. |
|Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.19.00.png | |Step_Picture_00=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.19.00.png | ||
|Step_Picture_01=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.46.40.png | |Step_Picture_01=Matelas_isolant_Capture_d_e_cran_2020-09-22_a_14.46.40.png | ||
}} | }} | ||
{{Notes | {{Notes | ||
| − | |Notes= | + | |Notes=It is also possible to 'stick' the foam pieces together with straps made from cutting plastic bottles (in slices) and using them as some kinds of laces mainting all the pieces together with small holes that you need to do in advance. |
}} | }} | ||
{{PageLang | {{PageLang | ||
Version actuelle datée du 19 octobre 2020 à 19:50
Difficulté
Facile
Durée
1,5 heure(s)
Coût
3 EUR (€)
Description
Building an insulated mattress from salvage life jackets' foams
Introduction
NEEDED :
With the winter arriving on Lesvos island, it was decisive to propose a solution to the cold infiltration inside the tents. In addition to the wooden pallets, this insulated mattress enables to improve insulation from the ground.
ACCESSIBILITY :
Matériaux
Life jackets foam
2 survival blankets
Plastic tarpaulin (could be replaced by a sewed tarpaulin made from inflatable dinghy's fabric )
Adhesive tape
Outils
Scissors/utility knife
Heating gun
Gloves
Étape 1 - Cut the foam from the life jackets
It consists of removing the foam inside the life jackets using scissors or an utility knife.
Étape 2 - Assemble the foam pieces
To assemble the pieces, use the heating gun to melt a little bit the foam before sticking it on another piece of foam. The goal is to achieve some kind of foam patchwork with the size wanted
For example it is possible to realize a big mattress covering entirely the floor of a tent.
Étape 3 - Roll the foam with survival blankets
To insulate the foam at best, you need to roll it using survival blankets. So as to do that, use adhesive tape to attach the blankets on both sides of the foam.
"NB: It is better to use the aluminium side on top so as to reflect the body's heat."
Étape 4 - Cover with a plastic tarpaulin
Cover the whole mattress with a plastic tarpaulin to avoid water and humidity to penetrate inside. Attach it again using adhesive tape.
Étape 5 - Use
The mattress is above the wooden pallet and the tent canvas. Foldable and pretty light, it can be transported easily.
Notes et références
It is also possible to 'stick' the foam pieces together with straps made from cutting plastic bottles (in slices) and using them as some kinds of laces mainting all the pieces together with small holes that you need to do in advance.
Published
Français
English
Deutsch
Español
Italiano
Português