Translations:Lampe solaire à batteries lithium récupérées/254/en : Différence entre versions

Version du 12 février 2020 à 17:26

Place the panel on the bigger board, mark the position of the + and - outputs of the pannel and drill a hole of 5mm in both boards. (If any component is already in this place, the hole should be moved).

Version du 12 février 2020 à 17:13 (voir la source) GoldofBengal (discussion \| contributions) (Page créée avec « Place the panel on the bigger board, mark the position of the output + and - of the pannel and drill a hole of 5mm in both boards. (If any component is already in this pla... »)		Version du 12 février 2020 à 17:26 (voir la source) GoldofBengal (discussion \| contributions) Modification suivante →
Ligne 1 :		Ligne 1 :
−	Place the panel on the bigger board, mark the position of the ~~output~~ + and - of the pannel and drill a hole of 5mm in both boards. (If any component is already in this place, the hole should be moved).	+	Place the panel on the bigger board, mark the position of the + and - outputs of the pannel and drill a hole of 5mm in both boards. (If any component is already in this place, the hole should be moved).