Translations:Hydroponie/9/en : Différence entre versions

(Page créée avec « The system used measures 2m long by 50cm wide. The skeleton is made up of 4 cleats / bamboos fixed in parallel at a distance of 15 cm thanks to wooden cleats. It is covere... »)
 
 
Ligne 1 : Ligne 1 :
−
The system used measures 2m long by 50cm wide. The skeleton is made up of 4 cleats / bamboos fixed in parallel at a distance of 15 cm thanks to wooden cleats. It is covered with an agricultural cover (width 1m) so as to form 3 gutters about 10cm deep. These gutters are filled with clay balls. An aquarium pump immersed in the biofilter tank propels the nutrient solution from the top side of these gutters (inclination of about 10 degrees) so that it flows through the clay balls until it returns to the storage tank (biofilter). The table is about 1.2m high (ergonomic for taking care of plants). A shade screen is attached like a skirt on the sides to protect the biofilters, nutrient solution storage tank and mushroom farm from the sun.  
+
The system used measures 2m long by 50cm wide. The skeleton is made up of 4 cleats / bamboos fixed in parallel at a distance of 15 cm thanks to wooden cleats. It is covered with an agricultural cover (width 1m) so as to form 3 gutters about 10cm deep. These gutters are filled with clay balls. An aquarium pump immersed in the biofilter tank propels the nutrient solution from the top side of these gutters (inclination of about 10 degrees) so that it flows through the clay balls until it returns to the storage tank (biofilter). The table is about 1.2m high (ergonomic for taking care of plants). A shade screen is attached like a skirt on the sides to protect the biofilters, nutrient solution storage tank and mushroom farm from the sun.
−
# Manufacturing of the support
 
−
* In this model we explain the process for 3 gutters but it is of course possible to duplicate it at will !
 
−
* Cut 4 strips of the same length (190 cm for us)
 
−
* Attach them parallel to a support using brackets and screws at regular intervals (15 cm)
 
−
* Staple the tarpaulin on the side of the first strip and then extend it to cover the next three (Possibility to double the tarpaulin for more resistance)
 
−
* Form gutters with the tarpaulin until it touches the support
 
−
* Staple the tarpaulin on each strip and cut it out.
 
−
* Water recovery
 

Version actuelle datée du 3 septembre 2019 à 10:49

Informations concernant le message (contribuer)
Ce message n’est pas documenté. Si vous savez où ou comment il est utilisé, vous pouvez aider les autres traducteurs en créant sa documentation.
Définition du message (Hydroponie)
Le système utilisé mesure 2m de long par 50cm de large. Le squelette est formé de 4 tasseaux/bambous fixés en parallèle à 15 cm d'écart grâce à des tasseaux de bois. Il est recouvert d'une bache agricole (largeur 1m) de manière à former 3 gouttières d'une profondeur de 10cm environ. Ces gouttières sont remplies de billes d'argile. Une pompe d'aquarium immergée dans le bac du biofiltre propulse la solution nutritive du coté haut de ces gouttières (inclinaison d'environ 10 degrés) afin qu'elle s'écoule à travers les billes d'argile jusqu'à retourner dans le bac de stockage (biofiltre). La table a une hauteur d'environ 1,2m de hauteur (ergonomique pour s'occuper des plantes). Une toile d'ombrage est fixée comme une jupe sur les côtés, afin de protéger du soleil les biofiltres, le bac de stockage de solution nutritive et la champignonnière.
TraductionThe system used measures 2m long by 50cm wide. The skeleton is made up of 4 cleats / bamboos fixed in parallel at a distance of 15 cm thanks to wooden cleats. It is covered with an agricultural cover (width 1m) so as to form 3 gutters about 10cm deep. These gutters are filled with clay balls. An aquarium pump immersed in the biofilter tank propels the nutrient solution from the top side of these gutters (inclination of about 10 degrees) so that it flows through the clay balls until it returns to the storage tank (biofilter). The table is about 1.2m high (ergonomic for taking care of plants). A shade screen is attached like a skirt on the sides to protect the biofilters, nutrient solution storage tank and mushroom farm from the sun.

The system used measures 2m long by 50cm wide. The skeleton is made up of 4 cleats / bamboos fixed in parallel at a distance of 15 cm thanks to wooden cleats. It is covered with an agricultural cover (width 1m) so as to form 3 gutters about 10cm deep. These gutters are filled with clay balls. An aquarium pump immersed in the biofilter tank propels the nutrient solution from the top side of these gutters (inclination of about 10 degrees) so that it flows through the clay balls until it returns to the storage tank (biofilter). The table is about 1.2m high (ergonomic for taking care of plants). A shade screen is attached like a skirt on the sides to protect the biofilters, nutrient solution storage tank and mushroom farm from the sun.

Récupérée de « https://wiki.lowtechlab.org/w/index.php?title=Translations:Hydroponie/9/en&oldid=50061 »
© 2017 - 2024 Dokit, SAS.