|
|
| (2 révisions intermédiaires par le même utilisateur non affichées) |
| Ligne 1 : |
Ligne 1 : |
| | 1. Crop gutters | | 1. Crop gutters |
| − | ((* Cleats (minimum width 10cm))
| |
| − | * Plastic sheeting
| |
| − | * Staples
| |
| − | * Clay beads
| |
| − | Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots
| |
| − | }}
| |
| − | * Brackets
| |
| − | * Wood screws
| |
| − | * Young shoots and cuttings
| |
| − | 2. Irrigation system
| |
| − | * 1 Submersible pump (aquarium pump)
| |
| − | * 5 m of thin plastic pipe (pump outlet)
| |
| − | * 1 End cap with 4 outlets for fine pipe
| |
| − | * 50 cm of wide plastic tube (Link between the filter and the bio-filter)
| |
| − | * 1 Wide pipe end cap (to be fixed on the filter tank)
| |
| − | * 1 Blower
| |
| − | 3. Filter and bio-filter
| |
| − | * 2 plastic bins of 60L
| |
| − | * Large gravel
| |
| − | * Sand
| |
| − | * 10L Clay beads
| |
| − | * 40L of water
| |
| − | In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square metre of cultivation. }}
| |
| − | 4. Control system
| |
| − | * Socket outlet with programmable timer or Arduino
| |
Français
English
Deutsch
Español
Italiano
Português