Matelas low-tech/en : Différence entre versions

Version actuelle datée du 14 août 2024 à 11:36

Tutorial de Low-tech with Refugees - Low-tech & Réfugiés | Catégories : Habitat

Low-tech with Refugees - Low-tech & Réfugiés

https://wiki.lowtechlab.org/wiki/Matelas_low-tech/en

Dernière modification le 14/08/2024

Difficulté

Facile

Durée

1 heure(s)

Coût

0 EUR (€)

Description

Creation of an insulating, compact, waterproof and comfortable mattress. The mattress can be made from recycled materials. Creation of an insulating, compact, waterproof and comfortable mattress. The mattress can be made from recycled materials

Difficulté

Facile

Durée

1 heure(s)

Coût

0 EUR (€)

Autres langues :

English • ‎español • ‎français • ‎العربية

Sommaire

1 Description
2 Sommaire
3 Introduction
4 Étape 1 - Fitting bubble wrap in the tarpaulin
5 Étape 2 - Fold the tarpaulin in on itself
6 Étape 3 - Fold the sides of the tarpaulin
7 Étape 4 - Making the welds
8 Étape 5 - Bonus
9 Notes et références
10 Commentaires

Licence : Attribution (CC BY)

Matelas, repos, Transportable, Isolant

Introduction

Creating a mattress

Matelas LowTech bache-bassin-epdm-1-02-mm-coupe.jpg

Matelas LowTech grosse-corde-en-jute-naturel-9-mm-x-2-m-p.jpg

Matériaux

Tarpaulin : Farmer

Bubble wrap : Removal company

Rope

Outils

Soda can or aluminium

Blowtorch

Rectangular piece of wood

Étape 1 - Fitting bubble wrap in the tarpaulin

Stretching the tarpaulin over a table

Place several layers of bubble wrap* to form a compact rectangle.

Bubble wrap can be replaced by different materials such as blankets, but bubble wrap is water-resistant and very light.

Matelas LowTech 142712748 399255651377942 8565515149177324699 n.jpg

Étape 2 - Fold the tarpaulin in on itself

Cover the bubble wrap with the other part of the tarpaulin so that the bubble wrap is no longer visible.

Étape 3 - Fold the sides of the tarpaulin

Fold the sides of the tarpaulin to make the welds

Matelas LowTech 143097626 347323756255433 8469546549742195900 n.jpg

Étape 4 - Making the welds

- Place the fold of the tarpaulin in the folded can and place the piece of wood to hold it together.

- Heat the whole can with the blowtorch for 30 seconds

The can must be folded like a sheet of paper

Be careful not to heat the tarpaulin directly with the torch.

- Apply pressure with the piece of wood on the can to complete the weld for about 30 seconds.

- Carefully peel off the can

- Carry out this step and the previous one as often as necessary on all the contours of the mattress.

Matelas LowTech 142423047 1141049139666238 6915400484983899730 n.jpg

Matelas LowTech 142713780 702723733732434 4773087471152750021 n.jpg

Matelas LowTech 142622903 411971206723243 572372099185942082 n.jpg

Étape 5 - Bonus

You have your mattresse !!!

You can roll it on itself and hold it in place with a rope.

Notes et références

Commentaires

en fr 1 Draft

@@ Ligne 4 : / Ligne 4 : @@
 |Licences=Attribution (CC BY)
 |Description=Creation of an insulating, compact, waterproof and comfortable mattress. The mattress can be made from recycled materials.
 Creation of an insulating, compact, waterproof and comfortable mattress. The mattress can be made from recycled materials
@@ Ligne 17 : / Ligne 16 : @@
 }}
 {{Introduction
-|Introduction=Réalisation d'un matelas
+|Introduction=Creating a mattress
-Making a mattress
 }}
 {{Materials
@@ Ligne 29 : / Ligne 25 : @@
 |Step_Picture_04=Matelas_LowTech_grosse-corde-en-jute-naturel-9-mm-x-2-m-p.jpg
 |Step_Picture_05=Matelas_LowTech_Tasseaux34-x-34-2.jpg
-|Material=Bache : Agriculteur
+|Material=Tarpaulin : Farmer
-Papier bulle : Société de déménagement
-Corde
-Bache: Farmer
-Bubble wrap: moving company
+Bubble wrap : Removal company
 Rope
-|Tools=Cannette de Soda ou aluminium
+|Tools=Soda can or aluminium
-Chalumeau
+Blowtorch
-Morceau de bois rectangulaire
-Can of Soda
-Torch
 Rectangular piece of wood
 }}
 {{Tuto Step
-|Step_Title=Mise en place du papier bulle dans la bache
+|Step_Title=Fitting bubble wrap in the tarpaulin
-|Step_Content=Tendre la bache sur une table
+|Step_Content=Stretching the tarpaulin over a table
-Placer plusieurs couches de papier bulle* de façon à former un rectangle compact
-le papier bulle peut être remplacé par différentes matières comme des couvertures, cependant le papier bulle ne craint pas l'eau et est très léger
-Stretch the tarpaulin on a table
-Place several layers of bubble wrap * to form a compact rectangle
+Place several layers of bubble wrap* to form a compact rectangle.
-bubble wrap can be replaced by different materials such as blankets, however bubble wrap is water resistant and very light
+Bubble wrap can be replaced by different materials such as blankets, but bubble wrap is water-resistant and very light.
 |Step_Picture_00=Matelas_LowTech_142712748_399255651377942_8565515149177324699_n.jpg
 }}
 {{Tuto Step
-|Step_Title=Replier la bache sur elle-même
+|Step_Title=Fold the tarpaulin in on itself
-|Step_Content=Recouvrir le papier bulle avec l'autre partie de la bache de façon à ne plus voir le papier bulle.
+|Step_Content=Cover the bubble wrap with the other part of the tarpaulin so that the bubble wrap is no longer visible.
-Cover the bubble wrap with the other part of the tarpaulin so that the bubble wrap can no longer be seen.
 <br />
@@ Ligne 82 : / Ligne 53 : @@
 }}
 {{Tuto Step
-|Step_Title=Plier les cotés de la bache
+|Step_Title=Fold the sides of the tarpaulin
-|Step_Content=Plier les côtés de la bache pour pouvoir réaliser les soudures
+|Step_Content=Fold the sides of the tarpaulin to make the welds
-Fold the sides of the sheet to be able to make the welds
 |Step_Picture_00=Matelas_LowTech_143097626_347323756255433_8469546549742195900_n.jpg
 }}
 {{Tuto Step
-|Step_Title=Réalisation des soudures
+|Step_Title=Making the welds
-|Step_Content=- Mettre le pli de la bache dans la cannette pliée et placer le morceau de bois afin de maintenir l'ensemble.
+|Step_Content=- Place the fold of the tarpaulin in the folded can and place the piece of wood to hold it together.
-- Chauffer l'ensemble de la canette  avec le chalumeau pendant 30 secondes
-La canette doit être pliée comme une feuille de papier
-Faire attention à ne pas chauffer la bache directement avec le  chalumeau
+- Heat the whole can with the blowtorch for 30 seconds
+The can must be folded like a sheet of paper
-- Appliquer une pression avec le bout de bois sur la canette afin de finaliser la soudure pendant environ 30 secondes
+Be careful not to heat the tarpaulin directly with the torch.
-- Décoler la canette délicatement
+- Apply pressure with the piece of wood on the can to complete the weld for about 30 seconds.
-- Réaliser cette étape et la précédente autant que nécessaire  sur l'ensemble des contours du matelas
+- Carefully peel off the can
-- Put the fold of the tarpaulin in the folded can and place the piece of wood in order to hold the whole.
+- Carry out this step and the previous one as often as necessary on all the contours of the mattress.
-- Heat the entire can with the torch for 30 seconds
-The bobbin should be folded like a sheet of paper
-Be careful not to heat the tarpaulin directly with the torch
-- Apply pressure with the piece of wood on the can to finalize the weld for about 30 seconds
-- Peel off the can delicately
-- Perform this step and the previous one as much as necessary on all the contours of the mattress
 |Step_Picture_00=Matelas_LowTech_142423047_1141049139666238_6915400484983899730_n.jpg
 |Step_Picture_01=Matelas_LowTech_142713780_702723733732434_4773087471152750021_n.jpg
@@ Ligne 129 : / Ligne 82 : @@
 {{Tuto Step
 |Step_Title=Bonus
-|Step_Content=Vous avez votre matelas !!!
+|Step_Content=You have your mattresse !!!
-Vous pouvez le rouler sur lui-même et le maintenir avec une corde
-You have your mattress !!!
-You can roll it up and hold it with a rope
+You can roll it on itself and hold it in place with a rope.
 |Step_Picture_00=Matelas_LowTech_143603225_773555530174988_3621913337573228116_n.jpg
 |Step_Picture_01=Matelas_LowTech_142924347_127536945882980_7208122561586895183_n.jpg