Chauferette DIY/en : Différence entre versions

(Page créée avec « -Funnel »)
(Page créée avec « To reuse it, repeat steps 4 and 5. »)
 
(6 révisions intermédiaires par le même utilisateur non affichées)
Ligne 37 : Ligne 37 :
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=
 
|Step_Title=
|Step_Content=Mettre 500mL de vinaigre dans un récipient et ajouter doucement le bicarbonate de soude (Vous pourrez observer un dégagement gazeux par formation de mousse, c'est du dioxyde de carbone).
+
|Step_Content=Put 500mL of vinegar in a container and gently add the bicarbonate of soda (you will see a gas being released as it foams, this is carbon dioxide).
 
|Step_Picture_00=Chauferette_DIY_1.1.png
 
|Step_Picture_00=Chauferette_DIY_1.1.png
 
|Step_Picture_01=Chauferette_DIY_1.2.png
 
|Step_Picture_01=Chauferette_DIY_1.2.png
Ligne 43 : Ligne 43 :
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=
 
|Step_Title=
|Step_Content=Verser cette solution dans les 500mL d'eau bouillante dans la casserole et laisser évaporer la solution: on remarque alors la formation de cristaux au fond de la casserole.
+
|Step_Content=Pour this solution into the 500mL of boiling water in the pan and allow the solution to evaporate: you will notice crystals forming at the bottom of the pan.
 
|Step_Picture_00=Chauferette_DIY_2.png
 
|Step_Picture_00=Chauferette_DIY_2.png
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=
 
|Step_Title=
|Step_Content=Retirer les cristaux au fond de la casserole et les broyer afin de les rentrer dans le contenant ( ici gourde pompotes).
+
|Step_Content=Remove the crystals from the bottom of the saucepan and crush them so that they fit into the container (in this case, the Pompotes flask).
 
|Step_Picture_00=Chauferette_DIY_3.png
 
|Step_Picture_00=Chauferette_DIY_3.png
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=
 
|Step_Title=
|Step_Content=Faire bouillir de l'eau  et laisser fondre le mélange dans la gourde à basse température  jusqu'à ce que le mélange soit liquide.
+
|Step_Content=Bring the water to the boil and melt the mixture in the flask at a low temperature until the mixture is liquid.
 
|Step_Picture_00=Chauferette_DIY_4.png
 
|Step_Picture_00=Chauferette_DIY_4.png
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=
 
|Step_Title=
|Step_Content=Laisser le sachet reposer à l'air libre en évitant tout choc.
+
|Step_Content=Leave the sachet to stand in the open air, avoiding any shocks.
 
|Step_Picture_00=Chauferette_DIY_5.png
 
|Step_Picture_00=Chauferette_DIY_5.png
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=
 
|Step_Title=
|Step_Content=Ajouter le trombone et malaxer par la suite le sachet, pour entraîner la cristallisation d'acétate de sodium qui, étant exothermique, va nous fournir de la chaleur !
+
|Step_Content=Add the paperclip and then stir the sachet to crystallize the sodium acetate which, being exothermic, will provide us with heat!
 
|Step_Picture_00=Chauferette_DIY_6.png
 
|Step_Picture_00=Chauferette_DIY_6.png
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
 
|Step_Title=
 
|Step_Title=
|Step_Content=Afin de la réutiliser, répéter l'etape 4 et 5.
+
|Step_Content=To reuse it, repeat steps 4 and 5.
 
}}
 
}}
 
{{Notes
 
{{Notes

Version actuelle datée du 14 août 2024 à 12:23

Tutorial de avatarLow-tech with Refugees - Low-tech & Réfugiés | Catégories : Outils

Hand heater

Difficulté
Facile
Durée
1,5 heure(s)
Coût
1 EUR (€)
Autres langues :
English • ‎español • ‎français • ‎العربية
Licence : Attribution (CC BY)

Matériaux

- 500 ml White vinegar

- 35 Baking soda

-500 ml Boiling water

Outils

-Coffee filter

-Spoon

-Saucepan

-Sachet

-Funnel

-Trombone

Étape 1 -

Put 500mL of vinegar in a container and gently add the bicarbonate of soda (you will see a gas being released as it foams, this is carbon dioxide).



Étape 2 -

Pour this solution into the 500mL of boiling water in the pan and allow the solution to evaporate: you will notice crystals forming at the bottom of the pan.




Étape 3 -

Remove the crystals from the bottom of the saucepan and crush them so that they fit into the container (in this case, the Pompotes flask).




Étape 4 -

Bring the water to the boil and melt the mixture in the flask at a low temperature until the mixture is liquid.




Étape 5 -

Leave the sachet to stand in the open air, avoiding any shocks.




Étape 6 -

Add the paperclip and then stir the sachet to crystallize the sodium acetate which, being exothermic, will provide us with heat!




Étape 7 -

To reuse it, repeat steps 4 and 5.

Commentaires

Published