Suivez les changements les plus récents du wiki sur cette page.
9 août 2024
| 18:13 | (Journal des créations de comptes utilisateur) . . [UweTims53530146 ; SeleneSynan674 ; RubyLindsey298 ; RosieMauer ; RosellaFigueroa ; RileyDangelo114 ; RebekahScroggins ; LeandroMartinez ; KraigWorden9 ; IsisBoss427797 ; DelTregurtha600 ; DannyPasco29 ; Chordmen5 ; ArielLanders7] | ||
| 18:13 . . Le compte de l’utilisateur RosellaFigueroa (discussion | contributions) a été créé | |||
| 17:50 . . Le compte de l’utilisateur DannyPasco29 (discussion | contributions) a été créé | |||
| 17:35 . . Le compte de l’utilisateur UweTims53530146 (discussion | contributions) a été créé | |||
| 17:10 . . Le compte de l’utilisateur RosieMauer (discussion | contributions) a été créé | |||
| 16:45 . . Le compte de l’utilisateur Chordmen5 (discussion | contributions) a été créé | |||
| 16:15 . . Le compte de l’utilisateur KraigWorden9 (discussion | contributions) a été créé | |||
| 16:14 . . Le compte de l’utilisateur LeandroMartinez (discussion | contributions) a été créé | |||
| 16:01 . . Le compte de l’utilisateur IsisBoss427797 (discussion | contributions) a été créé | |||
| 15:59 . . Le compte de l’utilisateur SeleneSynan674 (discussion | contributions) a été créé | |||
| 15:58 . . Le compte de l’utilisateur ArielLanders7 (discussion | contributions) a été créé | |||
| 15:31 . . Le compte de l’utilisateur RileyDangelo114 (discussion | contributions) a été créé | |||
| 15:07 . . Le compte de l’utilisateur RebekahScroggins (discussion | contributions) a été créé | |||
| 14:46 . . Le compte de l’utilisateur RubyLindsey298 (discussion | contributions) a été créé | |||
| 14:06 . . Le compte de l’utilisateur DelTregurtha600 (discussion | contributions) a été créé |
| 17:19 | (Journal des suppressions) . . [Spam Control (3×)] | ||
| 17:19 . . Spam Control (discussion | contributions) a supprimé la page Шлепки Женские Резиновые NEBIX Для Пляжа И Бассейна (this page has been identified as Spam by the SpamControl) | |||
| 16:27 . . Spam Control (discussion | contributions) a supprimé la page Шлепки Женские Резиновые NEBIX Для Пляжа И Бассейна (this page has been identified as Spam by the SpamControl) | |||
| 16:07 . . Spam Control (discussion | contributions) a supprimé la page How To Play In Cards (this page has been identified as Spam by the SpamControl) |
| 17:19 | (Tracer les changements de langue) . . [RosieMauer ; IsisBoss427797 ; ArielLanders7] | ||
| 17:19 . . RosieMauer (discussion | contributions) a changé la langue de la page Шлепки Женские Резиновые NEBIX Для Пляжа И Бассейна de français (fr) [défaut] à anglais (en). (Autoset Page Language) | |||
| 16:27 . . IsisBoss427797 (discussion | contributions) a changé la langue de la page Шлепки Женские Резиновые NEBIX Для Пляжа И Бассейна de français (fr) [défaut] à anglais (en). (Autoset Page Language) | |||
| 16:07 . . ArielLanders7 (discussion | contributions) a changé la langue de la page How To Play In Cards de français (fr) [défaut] à anglais (en). (Autoset Page Language) |
| N 15:03 | Bancs en ski/es (4 modifications | historique) . . (+5 011) . . [Low-tech with Refugees - Low-tech & Réfugiés (4×)] | ||
| 15:03 (actu | diff) . . (-4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Se construye un banco con 3 patas (sólo 2 patas plantean problemas de solidez, ya que los esquís son muy flexibles). ») | |||
| 15:02 (actu | diff) . . (-43) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « # El primer paso es recoger las paletas y los esquís, por ejemplo, en un centro de gestión de residuos o en una tienda de bricolaje. # El segundo es desmontar las paleta... ») | |||
| 14:47 (actu | diff) . . (-14) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Hacer un banco de 4-5 plazas con esquís reciclados ») | |||
| N | 14:47 (actu | diff) . . (+5 072) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « banco de esquí ») |
| 14:43 | Vélo à assistance électrique/en (125 modifications | historique) . . (-2 350) . . [Low-tech with Refugees - Low-tech & Réfugiés (125×)] | ||
| 14:43 (actu | diff) . . (+2) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Finally, you can reassemble the modified engine. ») | |||
| 14:43 (actu | diff) . . (-40) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Finally, the wires must be stored inside to prevent them getting caught in the rotor during operation. ») | |||
| 14:40 (actu | diff) . . (+2) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « (This coupling is called a triangular coupling because the circuit thus created forms a triangle). ») | |||
| 14:40 (actu | diff) . . (-180) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « If you don't have heat-shrink tubing, you can use several layers of paper tape to insulate, although tubing is more recommended. ») | |||
| 14:39 (actu | diff) . . (-23) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « *"a" (first internal terminal) with "B" (second external terminal) *"b" with "C" *"c" with "A" ») | |||
| 14:39 (actu | diff) . . (-30) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « To do this, if you have any available, slip a piece of heat-shrink tubing over one of the terminals to cover the solder joint and insulate it electrically, then solder the... ») | |||
| 14:39 (actu | diff) . . (-32) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Now we need to make the delta connection: connect the windings in a special way. ») | |||
| 14:38 (actu | diff) . . (-29) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Caution:''' Check that the motor phase cables are not touching, otherwise your ohmmeter will detect circuit continuity between two unconnected terminals. ») | |||
| 14:38 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Exemple : see image 3. ») | |||
| 14:38 (actu | diff) . . (-9) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Identify the various terminals connected using upper case letters for external terminals and lower case letters for internal terminals: "A", first external terminal identi... ») | |||
| 14:37 (actu | diff) . . (-13) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « When the resistance displayed is very low (note that 0L means infinity, no continuity in the circuit) or the multimeter beeps, this means that the terminals on which the p... ») | |||
| 14:37 (actu | diff) . . (-2) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « You now need to identify the pairs of internal and external terminals that are connected. To do this, use a multimeter in ohmmeter mode (resistance measurement), then touc... ») | |||
| 14:37 (actu | diff) . . (-15) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « These internal terminals that you have discovered are the motor phases, so they are connected to the three external terminals that you disconnected earlier. ») | |||
| 14:37 (actu | diff) . . (-14) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Warning: '''This step can be a little tricky because you must not cut the cables connected to the green part (Hall sensor inside the motor). ») | |||
| 14:37 (actu | diff) . . (-15) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Next, use a cutter to remove the insulating sleeves (6), (7) and (8), which are located in the centre of the motor between the shaft and the windings. ») | |||
| 14:36 (actu | diff) . . (+4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Annexes continued ») | |||
| 14:36 (actu | diff) . . (-25) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « The part we're interested in is the stator, the part with the windings, as these are the ones coupled in star, so we need to remove the insulation sheath (1), desolder whe... ») | |||
| 14:35 (actu | diff) . . (-16) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « First of all, you need to dismantle the hoverboard motor to separate the stator (fixed part with wires) and the rotor (rotating part with only magnets). ») | |||
| 14:35 (actu | diff) . . (-44) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « For the hoverboard motor to be able to drive the wheel correctly, its coupling must be changed from star to delta. ») | |||
| 14:35 (actu | diff) . . (-9) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « *Electronic part: <u>https://www.youtube.com/watch?v=qG8b6QkTnCU</u> *Test part: <u>https://www.youtube.com/watch?v=P6iGSc3aIrk</u> ») | |||
| 14:35 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Video sources : ») | |||
| 14:34 (actu | diff) . . (-41) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « This step is necessary if you need more speed. The operation is complicated and the regulatory limits must not be exceeded (see the section on <u>safety and legality</u>). ») | |||
| 14:34 (actu | diff) . . (-21) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « ===='''Motor modification (increased speed but higher power consumption)'''==== ») | |||
| 14:34 (actu | diff) . . (-31) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Note: ''' the charging cable may need to be separated from the plastic shell of the hoverboard. All other unused cables must be inaccessible and insulated. ») | |||
| 14:33 (actu | diff) . . (-65) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « To secure this assembly, it is possible to use available materials to make a box to store the card, leaving only the plug of the charging cable carefully reconnected to th... ») | |||
| 14:33 (actu | diff) . . (-18) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « You now need to take the hoverboard's motherboard, which has been put aside, and the charging cable, which needs to be reconnected ( (2) in image 1). ») | |||
| 14:33 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Recharging the battery ») | |||
| 14:32 (actu | diff) . . (-70) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « LIPO batteries are sensitive to vibration. We recommend covering them with a layer of sponge. To ensure that water does not seep through the openings required for the wire... ») | |||
| 14:32 (actu | diff) . . (-76) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « To protect the controller, it must be isolated from humidity, along with the battery. Taking into account their dimensions, a 1.5L or 2L bottle should suffice (see image 4... ») | |||
| 14:30 (actu | diff) . . (0) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « The ground is yellow in the video, the colour depends on the sensor, you need to read the datasheet to find the sensor ground. ») | |||
| 14:30 (actu | diff) . . (-52) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Warning:''' You must check that the PAS sensor sends back a voltage, a "1", when a magnet passes in front of the sensor. If not, the use of the transistor (<u>see hardw... ») | |||
| 14:30 (actu | diff) . . (0) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Notes :''' The direction of rotation can be reversed by inverting two phases of the motor. ») | |||
| 14:29 (actu | diff) . . (-33) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Referring to the image above, connect the PAS sensor (Violet, 5), the brushless motor power supply lines (Green, 2), the motor Hall effect sensor (Red, 3) and the brake se... ») | |||
| 14:29 (actu | diff) . . (-16) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Note:''' Check positive and negative polarity. ») | |||
| 14:29 (actu | diff) . . (-32) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « First of all, locate the positive and negative poles of the power supply (Blue, 1). Above all, these poles must not be reversed. The best way to secure the connection is t... ») | |||
| 14:29 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « <u>See image 2</u> ») | |||
| 14:28 (actu | diff) . . (-14) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Video explanation of the controller (additional video on the same channel): https://www.youtube.com/watch?t=861&v=jiirQQv5OKU&feature=youtu.be (from 13:30 min) ») | |||
| 14:28 (actu | diff) . . (-4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Reference site: [https://ebike-distribution.fr/epages/6f0ae033-c8fe-4a9d-b71d-5e69cad76385.sf/fr_FR/?ObjectPath=%2FShops%2F6f0ae033-c8fe-4a9d-b71d-5e69cad76385%2FCategorie... ») | |||
| 14:28 (actu | diff) . . (0) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « ==== '''Wiring''' ==== ») | |||
| 14:28 (actu | diff) . . (-4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Controller installation ») | |||
| 14:28 (actu | diff) . . (-20) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « You can add a threaded rod to the shroud to adjust the pressure that the hoverboard wheel exerts on the tyre, as shown in image 5. You can weld the rod or attach it like t... ») | |||
| 14:28 (actu | diff) . . (-14) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « The fixings should be similar to those shown in image 4. ») | |||
| 14:27 (actu | diff) . . (-25) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « The disadvantage of fixing to the seatpost is that the saddle will no longer be adjustable to suit the person using the bike. Depending on the proportions of the bike, it... ») | |||
| 14:27 (actu | diff) . . (-144) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « A metal tube similar to that in solution 1 can be fitted to the seatpost. Press the tube against the seatpost using metal plates and 4 bolts. Don't hesitate to deform the... ») | |||
| 14:27 (actu | diff) . . (+1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « ===='''Solution 2: Non-permanent and adjustable'''==== ») | |||
| 14:27 (actu | diff) . . (-20) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Warning:''' Remember to extend the cables before attaching them if necessary. ») | |||
| 14:26 (actu | diff) . . (-17) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Warning:''' You need to keep a small opening towards the seat tube so that you can pass the cables through and connect them to the controller. Ideally, the cables shoul... ») | |||
| 14:26 (actu | diff) . . (-76) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Weld a bracket to the base of the stay, where it meets the seat tube, so that you can weld the attachment bar at a slight angle (see image 2), not quite perpendicular to t... ») | |||
| 14:26 (actu | diff) . . (-75) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Solder the motor shaft (circled in red in image 1) to one end of a mounting bar (grey in image 1). This mounting bar should preferably be a profile with an open underside... ») | |||
| 14:25 (actu | diff) . . (-30) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « The metal profile must be long enough to position the hoverboard wheel in contact with the rear wheel of the bike, without it touching the saddle. ») | |||
| 14:25 (actu | diff) . . (-40) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « ===='''Solution 1: stronger and cheaper (if you have an arc welder)'''==== ») | |||
| 14:25 (actu | diff) . . (-2) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Attaching the hoverboard wheel ») | |||
| 14:25 (actu | diff) . . (-26) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Once installed, the sensor detects how far away the magnet is and when it is far enough away, it cuts the electrical circuit. ») | |||
| 14:25 (actu | diff) . . (-16) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Fasten the sensor in the same way with a clamp around the handlebars. ») | |||
| 14:25 (actu | diff) . . (+3) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Pass the collar through the hole in the centre of the magnet and attach it to the moving part. ») | |||
| 14:24 (actu | diff) . . (-26) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Solution 2: requires the use of clamps: ») | |||
| 14:24 (actu | diff) . . (-29) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Glue the magnet to the brake lever (moving part) using a quick-setting adhesive for metal and plastic (superglue type) and place the sensor on the fixed part, the two elem... ») | |||
| 14:23 (actu | diff) . . (-8) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Once the sensor is installed, simply reassemble the crank. ») | |||
| 14:23 (actu | diff) . . (-23) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « This time the housing, instead of being a conventional screw, should have grooves, so the sensor must be fitted into these grooves (see image 4): ») | |||
| 14:22 (actu | diff) . . (-20) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Image 3 - Using the 15 mm spanner, screw on the crank puller to release the crank. ») | |||
| 14:21 (actu | diff) . . (-20) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Image 2 - Install the crank puller in the free thread. ») | |||
| 14:21 (actu | diff) . . (-8) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Image 1 - Unbolt the crank using the Allen key. ») | |||
| 14:21 (actu | diff) . . (-24) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « To start with, you'll need to remove the left-hand crank, which on this type of bike requires the use of a special tool called a "crank remover": ») | |||
| 14:21 (actu | diff) . . (-11) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Tools required: Allen key, crank puller, 15 mm spanner. ») | |||
| 14:21 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Video source : https://www.youtube.com/watch?t=188&v=s1GjVU9R6Es&feature=youtu.be ») | |||
| 14:20 (actu | diff) . . (-21) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « ===='''Situation 2:''' New-generation square-axle bottom bracket bicycle, "integrated" sensor ==== ») | |||
| 14:18 (actu | diff) . . (-4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Sensor installation PAS Situation 2 ») | |||
| 14:18 (actu | diff) . . (-27) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Once the disc has been installed, the crankset needs to be reassembled. The crankset may be very sensitive (the motor turns at maximum power even when the crankset turns s... ») | |||
| 14:17 (actu | diff) . . (+8) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Attention : '''like the sensor, the disc has a direction of assembly, you will notice arrows indicating the direction of rotation, this must correspond with the directi... ») | |||
| 14:17 (actu | diff) . . (-30) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Be sure to leave a small gap between the sensor and the disc to avoid friction and thus damage to the device. ») | |||
| 14:17 (actu | diff) . . (+4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Once the sensor has been installed, the magnetised disc needs to be placed on the pedal axle (see image 6). As the sensor is blocked by the screw, it does not move and the... ») | |||
| 14:17 (actu | diff) . . (-38) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Warning:''' the sensor has a black plastic part, which must face outwards and the arrow indicating the direction of rotation (engraved on this same plastic part) toward... ») | |||
| 14:16 (actu | diff) . . (-17) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Then place the PAS sensor (a component with a metal part and a plastic part with a wire) on this shaft and screw the cover back on to secure it (see images 4 and 5). ») | |||
| 14:16 (actu | diff) . . (-5) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Be careful not to lose the bottom bracket bearings (see image 3)! ») | |||
| 14:16 (actu | diff) . . (+4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Once the plate has been removed, the cover behind it must be unscrewed (see image 2). Be careful: the screw pitch may be one pitch to the left, so it must be unscrewed in... ») | |||
| 14:16 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « First of all, you need to dismantle the crank, with the chainrings, on the transmission side (chainring, see image 1). ») | |||
| 14:16 (actu | diff) . . (-30) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Warning: '''the references in this tutorial only concern bikes with square-axle bottom brackets (which concern the majority of bikes on the market today). If your bike... ») | |||
| 14:15 (actu | diff) . . (-5) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « PAS sensor installation video reference (from 0:00 min to 13:30 min) :https://www.youtube.com/watch?t=0&v=jiirQQv5OKU&feature=youtu.be ») | |||
| 14:15 (actu | diff) . . (-21) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « ===='''Situation 1 : ''' ''universal'' square axle bottom bracket bike ==== ») | |||
| 14:15 (actu | diff) . . (-4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Sensor installation PAS Situation 1 ») | |||
| 14:15 (actu | diff) . . (-21) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « It is possible to keep the fixing system to make it easier to attach the wheel to the bike. ») | |||
| 14:15 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « At least one of the blocks of 4 screws needs to be unscrewed with an Allen key to obtain the motorised wheel that will drive the bicycle wheel (see image 4). ») | |||
| 14:14 (actu | diff) . . (-13) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Next, remove the "Sensor" boards (see image 2) to gain access to the motor mountings. ») | |||
| 14:14 (actu | diff) . . (-17) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « The motherboard is an important element to keep to enable the battery to be recharged. You need to locate the "Charging socket" (2) on the charging cable you put aside ear... ») | |||
| 14:14 (actu | diff) . . (-55) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Caution! ''' The battery is the most dangerous electronic component of the hoverboard. Any risk of impact, particularly with sharp objects, must be avoided. If the batt... ») | |||
| 14:14 (actu | diff) . . (-28) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Carefully remove the battery after disconnecting it from the motherboard and removing the wires from the central cylindrical area. Keep the battery (1) (see image 3) as it... ») | |||
| 14:14 (actu | diff) . . (-40) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Unplug the cables and mark where they are connected, using marked tape if possible. In particular, keep the charging cable to one side and mark where it is connected on th... ») | |||
| 14:13 (actu | diff) . . (-10) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « <u>See image 1</u> a basic diagram of the inside of a hoverboard. ») | |||
| 14:13 (actu | diff) . . (-21) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Note:''' Be careful with any wires connected to the plastic shells, such as the charging wire. ») | |||
| 14:13 (actu | diff) . . (-2) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « First of all, you need to remove the plastic shell that encloses all the electronic components. ») | |||
| 14:13 (actu | diff) . . (-40) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Dismantling the hoverboard will depend on the brand and type of hoverboard. The instructions and images that follow are general but there may be details that vary. ») | |||
| 14:12 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Video source : <u>https://www.youtube.com/watch?v=nikYUAnj7F0</u> ») | |||
| 14:11 (actu | diff) . . (+1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Hoverboard dismantling ») | |||
| 14:11 (actu | diff) . . (-9) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Tools for dismantling the crankset, PPE ») | |||
| 14:11 (actu | diff) . . (-4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Multimeter, cutter, wire cutter ») | |||
| 14:10 (actu | diff) . . (-13) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Soldering iron and arc welder ») | |||
| 14:10 (actu | diff) . . (-23) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Fasteners for controller, battery and wheel. ») | |||
| 14:10 (actu | diff) . . (-5) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Heat-shrink tubing''' (optional, to insulate against water) ») | |||
| 14:10 (actu | diff) . . (-20) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Clamps''' to secure the various components to the bike ») | |||
| 14:09 (actu | diff) . . (-6) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Metal square''' ») | |||
| 14:09 (actu | diff) . . (-6) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Open metal tube''' ») | |||
| 14:09 (actu | diff) . . (-16) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''XT60 connectors''' to secure the battery connection: ~€10 per 25 pairs ») | |||
| 14:07 (actu | diff) . . (+4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « [https://www.amazon.fr/10PCS-BS170-triode-transistor-nouveau/dp/B07J2HVTX6/ref=sr_1_2_sspa? __mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=BS170+transistor&q... ») | |||
| 14:07 (actu | diff) . . (-9) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « (allows you to obtain the correct signal from the pedalling sensor if it sends an inverted signal), may not be necessary depending on the PAS sensor, Reference: BS170 :~3-... ») | |||
| 14:06 (actu | diff) . . (-7) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « can be found on Ali express ») | |||
| 14:06 (actu | diff) . . (-12) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Ebike''' '''Brake sensor'''(to be mounted on the brake levers): ~4-7€ ») | |||
| 14:05 (actu | diff) . . (-28) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Note:''' unfortunately for bottom brackets with external bearings there are no PAS sensors sold individually, suitable for our tutorial. They are always adapted to the... ») | |||
| 14:03 (actu | diff) . . (-12) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « *with square axes ("universal"): [https://www.amazon.fr/Capteur-vitesse-%C3%A9lectrique-aimants-Assistant/dp/B07B4X2PBW/ref=pd_sbs_1?pd_rd_w=ekefF&pf_rd_p=552e14c5-0d8e-4f... ») | |||
| 14:03 (actu | diff) . . (-13) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « 2 options depending on the bottom bracket : ») | |||
| 14:02 (actu | diff) . . (-11) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Hall-effect sensor to be mounted on the pedalboard + disc with magnets (usually supplied): ») | |||
| 14:02 (actu | diff) . . (-37) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Warning:''' Before starting/ordering anything, make sure that the gap between the frame and the crankset is at least 4.5mm, otherwise you won't be able to fit the sensor. ») | |||
| 14:01 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''PAS sensor''' ») | |||
| 14:00 (actu | diff) . . (-18) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « 24V/36V 250w e-bike controller : ~€26 (Available on Aliexpress for less) ») | |||
| 13:59 (actu | diff) . . (+3) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « A second-hand hoverboard can be found for between €50 and €100. ») | |||
| 13:59 (actu | diff) . . (-16) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « All these elements can be found on a second-hand or used hoverboard. ») | |||
| 13:58 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « 36V charger ») | |||
| 13:58 (actu | diff) . . (-1) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « 36V 4.4Ah battery ») | |||
| 13:58 (actu | diff) . . (-4) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « Motor + 6" hoverboard wheel: 36v ») | |||
| 13:57 (actu | diff) . . (-26) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « The bike will not be homologated, which will not pose a problem for you with the police, but you will not be insured in the event of an accident. <br /> ») | |||
| 13:56 (actu | diff) . . (-62) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « * The assistance must only work up to a speed of 25 km/h (it is possible to pedal faster, but without assistance). * Motor power must not exceed 250W. * The assistance mus... ») | |||
| 13:55 (actu | diff) . . (-17) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « It boils down to a few key points: ») | |||
| 13:55 (actu | diff) . . (-23) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « With the modifications that are going to be made, this bike will comply with European regulations for electrically-assisted bicycles. You can find them [http://www.urban-e... ») | |||
| 13:55 (actu | diff) . . (-7) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « === Legal notice === ») | |||
| 13:54 (actu | diff) . . (-66) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) (Page créée avec « '''Caution!''' The various stages involve a lot of electronics, welding and mechanics. We therefore advise you to read this tutorial carefully and to find out about the va... ») | |||
| 13:54 (actu | diff) . . (+191) . . Low-tech with Refugees - Low-tech & Réfugiés (discussion | contributions) |
Français
English
Deutsch
Español
Italiano
Português