(Page créée avec « * Screw the 30mm x 16mm battens to the reflective backing in a baffle pattern. * The baffles, by 675mm, cover 3/4 of the width of the panel. '''Note''': Here, the gap incl... »)
* Screw the 30mm x 16mm battens to the reflective backing in a baffle pattern.
+
* Screw the 30mm x 16mm battens to the reflective part in a baffle pattern.
* The baffles, by 675mm, cover 3/4 of the width of the panel.
* The baffles, by 675mm, cover 3/4 of the width of the panel.
−
'''Note''': Here, the gap including 2 cleats is 220mm, this is the width of the slates used later. This spacing will allow a light recovery of each slate.
+
'''Note''': Here, the gap including 2 cleats is 220mm, this is the width of the slates used later. This spacing will allow a slight recovery of each slate.
Version actuelle datée du 1 août 2019 à 18:19
Screw the 30mm x 16mm battens to the reflective part in a baffle pattern.
The baffles, by 675mm, cover 3/4 of the width of the panel.
Note: Here, the gap including 2 cleats is 220mm, this is the width of the slates used later. This spacing will allow a slight recovery of each slate.
×
Erreur de saisie dans le nom du tutoriel
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #
Connexion
Pas encore enregistré ? Créez un compte pour profiter de toutes les fonctionnalités du service !