Translations:Cuiseur solaire parabolique/15/en : Différence entre versions

 
Ligne 1 : Ligne 1 :
 
Use the metal part of the parabolic dish that allows you to adjust the angle to align the plate's orientation with that of the parabolic dish by aiming at the focal point that will allow us to cook.
 
Use the metal part of the parabolic dish that allows you to adjust the angle to align the plate's orientation with that of the parabolic dish by aiming at the focal point that will allow us to cook.
We needed two spacers to tighten the bar against the stand in order to change the angle of inclination of the plate and adjust it with the angle of the parabolic surface stand.  
+
We needed two spacers to tighten the bar against the stand in order to change the angle of inclination of the plate and adjust it with the angle of the parabolic surface stand.
 
A bent metal sheet (using a vise) was also used to secure the bar on the parabolic dish.
 
A bent metal sheet (using a vise) was also used to secure the bar on the parabolic dish.

Version actuelle datée du 6 février 2023 à 20:53

Informations concernant le message (contribuer)
Ce message n’est pas documenté. Si vous savez où ou comment il est utilisé, vous pouvez aider les autres traducteurs en créant sa documentation.
Définition du message (Cuiseur solaire parabolique)
Utilisez la partie de la parabole en métal qui permet de fixer l'angle afin d'adapter l'orientation du plat avec celle de la parabole en visant le point focal qui nous permettra la cuisson.
On avait besoin de deux entretoises pour serrer la barre contre le support afin de changer l'angle d'inclinaison du plat et l'ajuster avec l'angle du support de la surface parabolique.
Une tôle métallique pliée (en se servant d'un étau) également a été utilisée afin de fixer la barre sur la parabole.
TraductionUse the metal part of the parabolic dish that allows you to adjust the angle to align the plate's orientation with that of the parabolic dish by aiming at the focal point that will allow us to cook.
We needed two spacers to tighten the bar against the stand in order to change the angle of inclination of the plate and adjust it with the angle of the parabolic surface stand.
A bent metal sheet (using a vise) was also used to secure the bar on the parabolic dish.

Use the metal part of the parabolic dish that allows you to adjust the angle to align the plate's orientation with that of the parabolic dish by aiming at the focal point that will allow us to cook. We needed two spacers to tighten the bar against the stand in order to change the angle of inclination of the plate and adjust it with the angle of the parabolic surface stand. A bent metal sheet (using a vise) was also used to secure the bar on the parabolic dish.