Translations:Ordinateur low-tech/26/en : Différence entre versions

Version actuelle datée du 6 février 2023 à 12:22

In addition, during startup, the red led should stay fixed and the green one should flash for a few seconds before turning off. If this is not the case, and if the Raspberry does not appear to startup on the screen, even after about thirty seconds, this means that it is unable to startup from the card. In fact, it is unable to find the code which allows it to 'boot' and install Raspbian.

Version du 4 février 2023 à 13:16 (voir la source) Preethi P (discussion \| contributions) (Page créée avec « In addition, during boot, the red led should stay fixed and the green one should flash for a few seconds before turning off. If this is not the case, and if the Raspberry... »)		Version actuelle datée du 6 février 2023 à 12:22 (voir la source) Preethi P (discussion \| contributions)
Ligne 1 :		Ligne 1 :
−	In addition, during ~~boot~~, the red led should stay fixed and the green one should flash for a few seconds before turning off. If this is not the case, and if the Raspberry does not appear to startup on the screen, even after about thirty seconds, '''this means that it is unable to startup from the card'''. In fact, it is unable to find the code which allows it to 'boot' and install Raspbian.	+	In addition, during startup, the red led should stay fixed and the green one should flash for a few seconds before turning off. If this is not the case, and if the Raspberry does not appear to startup on the screen, even after about thirty seconds, '''this means that it is unable to startup from the card'''. In fact, it is unable to find the code which allows it to 'boot' and install Raspbian.