Difference between revisions of "Translations:Hydroponie/6/en"

(Page créée avec « 1. Crop gutters * Cleats (minimum width 10cm) * Plastic sheeting * Staples * Clay beads Prefer the small clay balls, they are heavier and will allow a better maintenance o... »)
 
Line 1: Line 1:
 
1. Crop gutters
 
1. Crop gutters
* Cleats (minimum width 10cm)
+
((* Cleats (minimum width 10cm)
 
* Plastic sheeting
 
* Plastic sheeting
 
* Staples
 
* Staples

Revision as of 17:17, 10 March 2019

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Hydroponie)
1. Gouttières de cultures
Translation1. Crop gutters
((* Cleats (minimum width 10cm)
* Plastic sheeting
* Staples
* Clay beads
Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots
}}
* Brackets
* Wood screws
* Young shoots and cuttings
2. Irrigation system
* 1 Submersible pump (aquarium pump)
* 5 m of thin plastic pipe (pump outlet)
* 1 End cap with 4 outlets for fine pipe
* 50 cm of wide plastic tube (Link between the filter and the bio-filter)
* 1 Wide pipe end cap (to be fixed on the filter tank)
* 1 Blower
3. Filter and bio-filter
* 2 plastic bins of 60L 
* Large gravel 
* Sand
* 10L Clay beads 
* 40L of water 
In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square metre of cultivation. }}
4. Control system
* Socket outlet with programmable timer or Arduino

1. Crop gutters ((* Cleats (minimum width 10cm)

  • Plastic sheeting
  • Staples
  • Clay beads

Prefer the small clay balls, they are heavier and will allow a better maintenance of the roots }}

  • Brackets
  • Wood screws
  • Young shoots and cuttings

2. Irrigation system

  • 1 Submersible pump (aquarium pump)
  • 5 m of thin plastic pipe (pump outlet)
  • 1 End cap with 4 outlets for fine pipe
  • 50 cm of wide plastic tube (Link between the filter and the bio-filter)
  • 1 Wide pipe end cap (to be fixed on the filter tank)
  • 1 Blower

3. Filter and bio-filter

  • 2 plastic bins of 60L
  • Large gravel
  • Sand
  • 10L Clay beads
  • 40L of water

In order to ensure homogeneity of the water in terms of nutrients and temperature, we recommend using about 40L of water per square metre of cultivation. }} 4. Control system

  • Socket outlet with programmable timer or Arduino