Translations:Chauffe eau solaire/25/en : Différence entre versions

(Page créée avec « Refrigerator doors are filled with insulating foam. By recovering them and assembling them they form the back of the panel. They must be flat (and not curved), it does not... »)
 
 
Ligne 1 : Ligne 1 :
 
Refrigerator doors are filled with insulating foam. By recovering them and assembling them they form the back of the panel. They must be flat (and not curved), it does not matter if there is a chamfer on the edges, it will be filled with mastic.
 
Refrigerator doors are filled with insulating foam. By recovering them and assembling them they form the back of the panel. They must be flat (and not curved), it does not matter if there is a chamfer on the edges, it will be filled with mastic.
−
* disassemble the refrigerator door.
 
−
* Remove all the elements except the insulation and the door sheet: seal, laminations, bolts, handles, screws, stickers... If the inside is not flat, remove it too.
 
−
*If the foam insulation is deformed, saw off the protruding parts to make the face as flat as possible. You don't need to have a beautiful surface either, it's the back of the panel.
 

Version actuelle datée du 3 juillet 2020 à 09:25

Informations concernant le message (contribuer)
Ce message n’est pas documenté. Si vous savez où ou comment il est utilisé, vous pouvez aider les autres traducteurs en créant sa documentation.
Définition du message (Chauffe eau solaire)
Les portes de réfrigérateurs sont remplies de mousses isolantes. En les récupérant et en les assemblant elles forment l’arrière du panneau. Elles doivent être plates (et non pas bombées), ce n’est pas grave s’il y a un chanfrein sur les bords, il sera comblé avec du mastic.
TraductionRefrigerator doors are filled with insulating foam. By recovering them and assembling them they form the back of the panel. They must be flat (and not curved), it does not matter if there is a chamfer on the edges, it will be filled with mastic.

Refrigerator doors are filled with insulating foam. By recovering them and assembling them they form the back of the panel. They must be flat (and not curved), it does not matter if there is a chamfer on the edges, it will be filled with mastic.

Récupérée de « https://wiki.lowtechlab.org/w/index.php?title=Translations:Chauffe_eau_solaire/25/en&oldid=61660 »
© 2017 - 2024 Dokit, SAS.