Recent changes

Track the most recent changes to the wiki on this page.

Recent changes options
Legend:
N
This edit created a new page (also see list of new pages)
m
This is a minor edit
b
This edit was performed by a bot
(±123)
The page size changed by this number of bytes
Show last 50 | 100 | 200 | 250 | 500 changes in last 1 | 3 | 7 | 14 | 30 days
Hide registered users | Hide anonymous users | Hide my edits | Show bots | Hide minor edits
Show new changes starting from 02:13, 25 January 2020
   
Language:

24 January 2020

     19:52  (User creation log). . [ZulmaKurtz578‎; VictorNuss‎; NatishaRapke5‎]
      19:52 . . User account VictorNuss (talk | contribs) was created ‎
      19:40 . . User account NatishaRapke5 (talk | contribs) was created ‎
      06:56 . . User account ZulmaKurtz578 (talk | contribs) was created ‎
N    17:49  Chauffe-eau solaire à thermosyphon/es‎‎ (4 changes | history) . . (+7,900). . [GoldofBengal‎ (4×)]
      17:49 (cur | prev) . . (-13). . GoldofBengal (talk | contribs) (Page créée avec « Esto permite recoger el calor del sol y utilizarlo para calentar el agua que se almacena en un depósito de agua caliente. »)
      17:48 (cur | prev) . . (-7). . GoldofBengal (talk | contribs) (Page créée avec « Los sistemas de calentamiento solar de agua utilizan paneles solares, llamados colectores. »)
      17:47 (cur | prev) . . (-20). . GoldofBengal (talk | contribs) (Page créée avec « Un sistema muy sencillo para calentar el agua mediante energía solar. Este sistema funciona, sin bomba, utilizando únicamente el efecto termosifón. »)
N     17:47 (cur | prev) . . (+7,940). . GoldofBengal (talk | contribs) (Page créée avec « Calentador de agua solar a termosifón »)
N    17:46  Chauffe-eau solaire à thermosyphon/en‎‎ (33 changes | history) . . (+7,203). . [GoldofBengal‎ (33×)]
      17:46 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « How it works »)
      17:46 (cur | prev) . . (-16). . GoldofBengal (talk | contribs) (Page créée avec « * Dip both hoses into the tank. »)
      17:45 (cur | prev) . . (-18). . GoldofBengal (talk | contribs) (Page créée avec « '''Note''': Be careful not to over-tighten the hose clamps which will eventually tear the silicone/latex hoses. »)
      17:45 (cur | prev) . . (-48). . GoldofBengal (talk | contribs) (Page créée avec « * Cut the copper pipes coming out of the frame leaving 2-3cm. * Attach a silicone or latex tube to each of the outlets using hose clamps. Make sure that the connection is... »)
      17:44 (cur | prev) . . (-43). . GoldofBengal (talk | contribs) (Page créée avec « For the water tank, we have chosen a 30L waste bin with a lid. Ideally, the tank should be insulated to conserve heat. »)
      17:44 (cur | prev) . . (-4). . GoldofBengal (talk | contribs) (Page créée avec « Connection to the water tank »)
      17:43 (cur | prev) . . (-36). . GoldofBengal (talk | contribs) (Page créée avec « * Place the glass on the frame holds. Make sure that it is tightly fitted and sealed. If necessary, fill the gaps with cardboard, fabric or silicone for insulation. * To f... »)
      17:43 (cur | prev) . . (-6). . GoldofBengal (talk | contribs) (Page créée avec « Glass pose »)
      17:43 (cur | prev) . . (-15). . GoldofBengal (talk | contribs) (Page créée avec « * Make sure to keep a good straight length at the ends and take them out through the 2 holes provided for this purpose in the frame. * In order to maximize the exchange su... »)
      17:42 (cur | prev) . . (-31). . GoldofBengal (talk | contribs) (Page créée avec « '''Note''': It is important to use a suitable tool to make a nice bend and not to make a bend in the pipe. At this diameter, the pipe tends to bend quickly and will eventu... »)
      17:42 (cur | prev) . . (-20). . GoldofBengal (talk | contribs) (Page créée avec « * Using a bending tool, form a circuit with the copper pipe. »)
      17:41 (cur | prev) . . (-24). . GoldofBengal (talk | contribs) (Page créée avec « In this system, there is no heat exchanger as in a conventional hot water tank. The water in the tank passes directly through the copper pipe and heats up on contact with... »)
      17:41 (cur | prev) . . (0). . GoldofBengal (talk | contribs) (Page créée avec « Water circuit »)
      17:41 (cur | prev) . . (-27). . GoldofBengal (talk | contribs) (Page créée avec « - Cover the cardboard with 2 layers of aluminium foil. The purpose of this is to distribute the heat evenly over the surface in contact with the copper tube. »)
      17:41 (cur | prev) . . (-34). . GoldofBengal (talk | contribs) (Page créée avec « - Cut cardboard (or other insulation) to fit the bottom of the frame perfectly. »)
      17:40 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « In order to retain maximum heat inside the water heater, it is important that the frame is insulated as much as possible. Air leakage and thermal bridges must be avoided.... »)
      17:38 (cur | prev) . . (-152). . GoldofBengal (talk | contribs) (Page créée avec « * On the 85x85cm plywood plate, screw two 85cm cleats and two 72cm wooden strips to form a frame. Choose strips about 6 cm thick to have a little depth. * Check that your... »)
      17:36 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « The measurements are given for information only. They have to be adapted according to the size of your window. »)
      17:35 (cur | prev) . . (-3). . GoldofBengal (talk | contribs) (Page créée avec « Frame construction »)
      17:35 (cur | prev) . . (-48). . GoldofBengal (talk | contribs) (Page créée avec « For this reason, the solar collector is always mounted underneath the water storage tank, so that the cold water from the tank reaches the collector via a downhill water p... »)
      17:35 (cur | prev) . . (-23). . GoldofBengal (talk | contribs) (Page créée avec « The principle of the thermosiphon system is that cold water has a higher density than hot water because it is more compact. It is therefore heavier and sinking. However, a... »)
      17:33 (cur | prev) . . (-21). . GoldofBengal (talk | contribs) (Page créée avec « Our system has no pumping system. The water circulation is only done thanks to a thermodynamic phenomenon called '''[https://en.wikipedia.org/wiki/Thermosiphon thermosipho... »)
      17:32 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « Thermosyphon Theory »)
      17:32 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      17:31 (cur | prev) . . (-20). . GoldofBengal (talk | contribs) (Page créée avec « We decided to test a plane-type sensor operating as a thermosiphon, i.e. without pumping system. »)
      17:30 (cur | prev) . . (-11). . GoldofBengal (talk | contribs) (Page créée avec « Vacuum collectors are known to be more efficient because they suffer less leakage (thanks to the air vacuum in the tubes) than flat collectors. They are nevertheless more... »)
      17:30 (cur | prev) . . (+5). . GoldofBengal (talk | contribs)
      17:29 (cur | prev) . . (-14). . GoldofBengal (talk | contribs) (Page créée avec « *vacuum tubes; *flat cells, which can be mounted on a wall or a roof. »)
      17:29 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « There are two types of solar panels for water heating: »)
      17:29 (cur | prev) . . (-23). . GoldofBengal (talk | contribs) (Page créée avec « This allows the heat from the sun to be collected and used to heat the water that is stored in a hot water tank. »)
      17:29 (cur | prev) . . (-33). . GoldofBengal (talk | contribs) (Page créée avec « Solar water heating systems use solar panels, called collectors. »)
      17:28 (cur | prev) . . (-41). . GoldofBengal (talk | contribs) (Page créée avec « A very simple system for heating water using solar energy. This system works, without a pump, using only the thermosiphon effect. »)
N     17:28 (cur | prev) . . (+8,042). . GoldofBengal (talk | contribs) (Page créée avec « Thermosyphon Solar Water Heater »)
     17:31  (Page translation log). . [GoldofBengal‎ (2×); 127.0.0.1‎ (3×)]
      17:31 . . 127.0.0.1 (talk) marked Chauffe-eau solaire à thermosyphon for translation ‎
      17:31 . . 127.0.0.1 (talk) marked Chauffe-eau solaire à thermosyphon for translation ‎
      17:31 . . 127.0.0.1 (talk) removed priority languages from translatable page Chauffe-eau solaire à thermosyphon
      17:27 . . GoldofBengal (talk | contribs) marked Chauffe-eau solaire à thermosyphon for translation ‎
      17:27 . . GoldofBengal (talk | contribs) set the priority languages for translatable page Chauffe-eau solaire à thermosyphon to English and Spanish ‎
     17:31  Chauffe-eau solaire à thermosyphon‎‎ (3 changes | history) . . (+301). . [GoldofBengal‎ (3×)]
      17:31 (cur | prev) . . (-127). . GoldofBengal (talk | contribs)
      17:31 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      17:25 (cur | prev) . . (+4). . GoldofBengal (talk | contribs)
     15:59  L'éolienne/en-gb‎‎ (92 changes | history) . . (-1,227). . [GoldofBengal‎ (92×)]
      15:59 (cur | prev) . . (+7). . GoldofBengal (talk | contribs)
      15:58 (cur | prev) . . (+4). . GoldofBengal (talk | contribs)
      15:58 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « FIND THE SKAVENJY TUTORIAL, inspired by this model: [https://www.skavenji.fr/wp-content/uploads/2019/09/TUTORIEL-EOLIENNE-LOW-TECH-SKAVENJI.pdf] »)
      15:57 (cur | prev) . . (-17). . GoldofBengal (talk | contribs) (Page créée avec « Feel free to comment, share, and enhance the tutorial with useful information to improve it. »)
      15:57 (cur | prev) . . (-24). . GoldofBengal (talk | contribs) (Page créée avec « Connect a mobile phone or other device with a USB connection to the electrical circuit and let it charge for a few hours. In an average wind, allow 5 hours of charging ti... »)
      15:56 (cur | prev) . . (-8). . GoldofBengal (talk | contribs) (Page créée avec « Use »)
      15:56 (cur | prev) . . (-19). . GoldofBengal (talk | contribs) (Page créée avec « Cover the engine and the inner tube electrical circuit: this will protect them from rain or sea spray. ''(picture 14)'' »)
      15:56 (cur | prev) . . (-4). . GoldofBengal (talk | contribs) (Page créée avec « Motor protection »)
      15:56 (cur | prev) . . (-27). . GoldofBengal (talk | contribs) (Page créée avec « Your circuit's ready to go. You can connect a telephone to it, provided there is wind of course.''(picture 13)' »)
      15:55 (cur | prev) . . (-11). . GoldofBengal (talk | contribs) (Page créée avec « 2 - Solder the red wire to the regulator output and the black wire to the regulator common. (image 12)''. »)
      15:55 (cur | prev) . . (-8). . GoldofBengal (talk | contribs) (Page créée avec « 1 - Solder a red wire to the positive terminal and a black wire to the negative terminal. These will be the output wires of your wind turbine, to which you can connect a b... »)
      15:54 (cur | prev) . . (-24). . GoldofBengal (talk | contribs) (Page créée avec « When you place your connector on a table with the plastic tab facing up, the right tab is your positive terminal, and the left tab is your negative terminal. »)
      15:54 (cur | prev) . . (-3). . GoldofBengal (talk | contribs) (Page créée avec « The electrical circuit - Connecting the USB port »)
      15:54 (cur | prev) . . (-15). . GoldofBengal (talk | contribs) (Page créée avec « Alternative: use a voltage booster that will provide an output voltage of 5V (USB) with an input voltage ranging from 0.9 to 5V. »)
      15:53 (cur | prev) . . (-3). . GoldofBengal (talk | contribs) (Page créée avec « 1 - Solder the negative pole of the capacitor with the common of the voltage regulator. Solder the plus of the capacitor to the input of the voltage regulator.''(image 10)'' »)
      15:53 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « The voltage regulator has 3 different rods : - 1 entry - 1 common - 1 exit »)
      15:52 (cur | prev) . . (-37). . GoldofBengal (talk | contribs) (Page créée avec « ''*Note: Each controller is different, if you want a 12V output, for example, buy your controller accordingly. Here to connect a USB port we'll use a 5V one.'' »)
      15:51 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « The voltage regulator makes it possible to recover a 5V output current. »)
      15:51 (cur | prev) . . (-13). . GoldofBengal (talk | contribs) (Page créée avec « The electrical circuit - Voltage regulator or voltage booster »)
      15:50 (cur | prev) . . (-45). . GoldofBengal (talk | contribs) (Page créée avec « ''* Tip: If the legs of your components are too short to weld together, you can connect them with electrical wires.'' »)
      15:49 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « 1 - Solder the negative poles together and then the positive poles together at the rectifier output. (image 9)''. »)
      15:49 (cur | prev) . . (-22). . GoldofBengal (talk | contribs) (Page créée avec « ''* Tip: It is also possible to refer to the "-" symbol written on the minus pole.'' »)
      15:48 (cur | prev) . . (-13). . GoldofBengal (talk | contribs) (Page créée avec « The capacitor is a polarized component: - the positive terminal is the longest leg - the negative terminal is the shortest leg »)
      15:46 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « The energy supplied by the wind turbine is not constant because the wind speed is constantly changing. The overload must therefore be temporarily stored in order to to be... »)
      15:45 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « The electrical circuit - Capacitor »)
      15:45 (cur | prev) . . (-8). . GoldofBengal (talk | contribs) (Page créée avec « 2 - Solder the negative outputs of the two rectifiers together, then solder the positive outputs of the two rectifiers together. "(picture 8)''. »)
      15:44 (cur | prev) . . (-35). . GoldofBengal (talk | contribs) (Page créée avec « ''* Tip: It is possible to use heat shrink tubing to cover the connections to protect the system.'' »)
      15:44 (cur | prev) . . (-25). . GoldofBengal (talk | contribs) (Page créée avec « 1 - Solder the stepper motor voltage outputs (previously selected) to the alternating inputs of each rectifier: the first torque with the alternating poles of the first re... »)
      15:43 (cur | prev) . . (-15). . GoldofBengal (talk | contribs) (Page créée avec « ''* Tip: on the rectifier head each of these 4 poles are marked '' »)
      15:43 (cur | prev) . . (-26). . GoldofBengal (talk | contribs) (Page créée avec « Each rectifier has 4 legs: The two central legs are the alternating poles of the capacitor. The two outer legs are the positive and negative poles of the capacitor. »)
      15:42 (cur | prev) . . (-15). . GoldofBengal (talk | contribs) (Page créée avec « At the output of the engine, we get alternating current (AC). However, to charge a battery or light a lamp, it is necessary to have direct current (DC). Two rectifiers are... »)
      15:41 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « The electrical circuit is as shown in "Figure 4". »)
      15:41 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « The electrical circuit - Rectifiers »)
      15:41 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « 3 - Check that there is the same angle between each of the blades. »)
      15:40 (cur | prev) . . (-21). . GoldofBengal (talk | contribs) (Page créée avec « 2 - Screw the base of the blades to the metal plate. Use the holes drilled in the metal plate in step 2. (image 6)''. »)
      15:40 (cur | prev) . . (-21). . GoldofBengal (talk | contribs) (Page créée avec « 1 - Screw the blades (cut out in step 3) to their base (cut out in step 4). »)
      15:39 (cur | prev) . . (+3). . GoldofBengal (talk | contribs) (Page créée avec « The Wind Turbine - Assembly »)
      15:39 (cur | prev) . . (-13). . GoldofBengal (talk | contribs) (Page créée avec « 4 - Sand the edges of the aileron for better aerodynamics and better rendering. ''(frame 5)'' »)
      15:39 (cur | prev) . . (-16). . GoldofBengal (talk | contribs) (Page créée avec « ''* Note: The dimensions of this part depend on the size of your motor.'' »)
      15:38 (cur | prev) . . (-33). . GoldofBengal (talk | contribs) (Page créée avec « 3 - On the aileron, mark the location of the motor so that it can be forced into the shape. ''(diagram 3 - motor)'' »)
      15:38 (cur | prev) . . (-15). . GoldofBengal (talk | contribs) (Page créée avec « 2 - In the same board, cut out a square the size of your engine (here 80x80cm) which will be used to accommodate the blades previously cut out in order to join them togeth... »)
      11:50 (cur | prev) . . (-34). . GoldofBengal (talk | contribs) (Page créée avec « ''* Tip: You can use figure 3 above to draw the shape of the fin.'' »)
      11:49 (cur | prev) . . (-17). . GoldofBengal (talk | contribs) (Page créée avec « 1 - In a wooden board, draw and cut out the fin. ''(image 5)'' »)
      11:49 (cur | prev) . . (0). . GoldofBengal (talk | contribs) (Page créée avec « The Wind Turbine - Fins and Blade Bases »)
      11:49 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « Your blades are ready! »)
      11:49 (cur | prev) . . (+1). . GoldofBengal (talk | contribs) (Page créée avec « 3 - Drill the blades: the drilling is carried out as close as possible to the trailing edge so that the latter can be fixed flat on the plate that carries the blades.'' (i... »)
      11:48 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « 2 - Sand the edges of each of the blades: the leading edge must be rounded, and the trailing edge sharpened. »)
      11:47 (cur | prev) . . (-7). . GoldofBengal (talk | contribs) (Page créée avec « Figure 3 shows the cutting direction. »)
      11:46 (cur | prev) . . (-6). . GoldofBengal (talk | contribs) (Page créée avec « ''* Tip: You can help yourself from the diagram 2 above to draw the shape of the blades.'' »)
      11:45 (cur | prev) . . (-10). . GoldofBengal (talk | contribs) (Page créée avec « 1 - Draw and cut the blades in a PVC tube. (picture 3)''. »)
      11:45 (cur | prev) . . (-9). . GoldofBengal (talk | contribs) (Page créée avec « Under normal conditions, the length of the blade should be 35 cm. »)
      11:44 (cur | prev) . . (-23). . GoldofBengal (talk | contribs) (Page créée avec « Where: * L = blade length in m * P = characteristic power of the motor in W * V = wind speed in m/s (depending on location) »)
      11:44 (cur | prev) . . (-10). . GoldofBengal (talk | contribs) (Page créée avec « This formula can be used to calculate the length of the blades of the wind turbine: »)
      11:43 (cur | prev) . . (-14). . GoldofBengal (talk | contribs) (Page créée avec « From the formula linking the wind speed, a given surface and the power of the wind on this surface : »)
      11:43 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « The Wind Turbine - Blade Preparation »)
      11:43 (cur | prev) . . (-16). . GoldofBengal (talk | contribs) (Page créée avec « 2 - Weld the motor shaft to the central hole of the metal plate'' (picture 2)''. »)
      06:53 (cur | prev) . . (-32). . GoldofBengal (talk | contribs) (Page créée avec « ''* Tip: You can use figure 1 above to cut and drill the plate.'' »)
      06:53 (cur | prev) . . (-10). . GoldofBengal (talk | contribs) (Page créée avec « 1 - Cutting a metal plate of 80x30 cm. Drill it with 5 holes of diameter 4mm. »)
      06:53 (cur | prev) . . (+2). . GoldofBengal (talk | contribs) (Page créée avec « The Wind Turbine - Motor Axis »)
      06:52 (cur | prev) . . (-37). . GoldofBengal (talk | contribs) (Page créée avec « Note: there are also 8 wires. In fact it is a 6-wire (so 4 coils) but with 4 independent coils (like a 4-wire so ...). So use the 4-wire method but more times. »)
      06:52 (cur | prev) . . (-27). . GoldofBengal (talk | contribs) (Page créée avec « For a 6 wire it is hardly more complex: we apply the same method to determine the sets of 3 wires per spool. Then we switch to ohmeter mode and look for which pair of wire... »)
      06:51 (cur | prev) . . (-32). . GoldofBengal (talk | contribs) (Page créée avec « For a 4-wire system, it's very simple: you take one wire on one probe, and with the other probe you touch the other wires. When there is one that goes "BBBIIIIIPPPPP!!" or... »)
      06:51 (cur | prev) . . (-16). . GoldofBengal (talk | contribs) (Page créée avec « 2) The first step is to separate the two sets of wire for each coil. »)
      06:50 (cur | prev) . . (-22). . GoldofBengal (talk | contribs) (Page créée avec « 1) Just put your multimeter in ohm meter mode, or even better in contact detection mode (you know when it does "BBIIIIPPPPP !!" when the two probes are touching ). »)
      06:49 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « From this point, it's very simple: »)
      06:49 (cur | prev) . . (-18). . GoldofBengal (talk | contribs) (Page créée avec « As described in the picture, in the case of a 6-wire we will not use the mid-point. In fact, we will accumulate two coils to make one and generate more tension. »)
      06:49 (cur | prev) . . (+2). . GoldofBengal (talk | contribs) (Page créée avec « (picture 2) »)
      06:48 (cur | prev) . . (-42). . GoldofBengal (talk | contribs) (Page créée avec « In fact, stepper motors are schematically made up of two or four coils: »)
      06:48 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « '''Method #2''' »)
      06:48 (cur | prev) . . (-9). . GoldofBengal (talk | contribs) (Page créée avec « ''* Tip: Mark with colored tape the two selected couples so they don't get mixed up with each other.'' »)
      06:48 (cur | prev) . . (-33). . GoldofBengal (talk | contribs) (Page créée avec « 3 - Select the two wire pairs with the highest output voltage (here 10V, this may vary depending on the motor). These will then be connected to the electrical circuit of t... »)
      06:47 (cur | prev) . . (-46). . GoldofBengal (talk | contribs) (Page créée avec « 2 - Using a screwdriver, a voltmeter set to " AC " and alligator clips, test the pairs of wires. Note the tension for each pair. ''(picture 1)'' »)
      06:46 (cur | prev) . . (-27). . GoldofBengal (talk | contribs) (Page créée avec « In order to find out which of the 6 wires has the highest output voltage, all possible motor output torques must be tested and the two highest selected. »)
      06:45 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « '''Method #1''' »)
      06:45 (cur | prev) . . (-11). . GoldofBengal (talk | contribs) (Page créée avec « From the two possible methods: »)
      06:45 (cur | prev) . . (-7). . GoldofBengal (talk | contribs) (Page créée avec « 1 - Cut the 6 wires coming out of the stepper motor, strip and twist them. »)
      06:45 (cur | prev) . . (-28). . GoldofBengal (talk | contribs) (Page créée avec « The choice of motor will also be conditioned by the maximum voltage (Vmax). A motor characterized at 3V will deliver a much lower power than a motor characterized at 50V a... »)
      06:44 (cur | prev) . . (-31). . GoldofBengal (talk | contribs) (Page créée avec « For example, a stepper motor with an angle of 3.6° will have 360/3.6 = 100 steps, a 1.8° motor will have 360/1.8 : 200 steps . If you had to choose between two motors wi... »)
      06:44 (cur | prev) . . (-70). . GoldofBengal (talk | contribs) (Page créée avec « In general, the more steps the motor has, the lower the speed at constant voltage. Important technical data for the selection of the motor are : - The maximum or nominal v... »)
      06:43 (cur | prev) . . (+6). . GoldofBengal (talk | contribs)
      06:43 (cur | prev) . . (0). . GoldofBengal (talk | contribs)
      06:43 (cur | prev) . . (-1). . GoldofBengal (talk | contribs)
      06:42 (cur | prev) . . (-1). . GoldofBengal (talk | contribs)
      06:42 (cur | prev) . . (-7). . GoldofBengal (talk | contribs)
      06:42 (cur | prev) . . (-1). . GoldofBengal (talk | contribs)
      06:41 (cur | prev) . . (-1). . GoldofBengal (talk | contribs)
      06:41 (cur | prev) . . (-10). . GoldofBengal (talk | contribs)
      06:41 (cur | prev) . . (-6). . GoldofBengal (talk | contribs)
      06:41 (cur | prev) . . (+4). . GoldofBengal (talk | contribs)
      06:40 (cur | prev) . . (0). . GoldofBengal (talk | contribs)
      06:39 (cur | prev) . . (+2). . GoldofBengal (talk | contribs)
      06:38 (cur | prev) . . (+4). . GoldofBengal (talk | contribs)
N    04:43  Culture de pleurotes/es‎‎ (51 changes | history) . . (+11,728). . [GoldofBengal‎ (51×)]
      04:43 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « Información traducida del libro de Paul Stamets: [http://champignonscomestibles.com/growing-gourmet-medicinal-mushrooms Growing gourmet and medicinal mushroom]. »)
      04:42 (cur | prev) . . (-13). . GoldofBengal (talk | contribs) (Page créée avec « '''Cosecha potencial''': 750g a 2kg de hongos por 1kg de sustrato dependiendo de la madurez de los hongos y el número de cosechas. En buenas condiciones, se pueden obtene... »)
      04:41 (cur | prev) . . (-21). . GoldofBengal (talk | contribs) (Page créée avec « * Cosechar las ostras antes de que aparezcan sus sombreros. Cosecha el racimo dándole la vuelta completamente con la mano, de una sola vez. »)
      04:40 (cur | prev) . . (-8). . GoldofBengal (talk | contribs) (Page créée avec « * Regar bien las primordias (3-4x/d en spray difuso). En cuanto tenemos primordias, se duplican en volumen cada día. En buenas condiciones se pueden preparar las setas de... »)
      04:40 (cur | prev) . . (-26). . GoldofBengal (talk | contribs) (Page créée avec « *Una vez que el micelio ha colonizado todo el sustrato y el frasco es blanco, haga agujeros de 1,5 cm de diámetro cuando sienta o vea bolas de primordias a través de la... »)
      04:39 (cur | prev) . . (-108). . GoldofBengal (talk | contribs) (Page créée avec « En la naturaleza, la luz actúa como una advertencia al micelio de que debe formar hongos para que sus esporas puedan dispersarse en un ambiente abierto. La luz juega un p... »)
      04:37 (cur | prev) . . (-8). . GoldofBengal (talk | contribs) (Page créée avec « '''Luz:''' »)
      04:37 (cur | prev) . . (+1). . GoldofBengal (talk | contribs) (Page créée avec « '''T°C de fructificación: 10-21°C''' »)
      04:37 (cur | prev) . . (+1). . GoldofBengal (talk | contribs) (Page créée avec « '''T°C de inicio de las primordias: 10-15°C.''' »)
      04:36 (cur | prev) . . (-3). . GoldofBengal (talk | contribs) (Page créée avec « '''Para las ostras:''' »)
      04:36 (cur | prev) . . (-84). . GoldofBengal (talk | contribs) (Page créée avec « Muchas especies no formarán hongos hasta que la temperatura '''baje'''. El momento ideal para variar la temperatura (y otros factores) es cuando el '''sustrato está tota... »)
      04:34 (cur | prev) . . (-4). . GoldofBengal (talk | contribs) (Page créée avec « '''Temperatura:''' »)
      04:34 (cur | prev) . . (+13). . GoldofBengal (talk | contribs) (Page créée avec « Una buena aireación favorece la aparición de primordias. Gracias a la aireación, el contenido de dióxido de carbono (CO2) disminuye rápidamente mientras que el oxíge... »)
      04:33 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « '''Ventilación:''' »)
      04:32 (cur | prev) . . (-42). . GoldofBengal (talk | contribs) (Page créée avec « Una alta humedad entre el 95% y el 100% debe ser proporcionada por un riego '''ligero''' y '''regular'''. El sustrato debe colocarse en condiciones cercanas a la niebla cu... »)
      04:31 (cur | prev) . . (-6). . GoldofBengal (talk | contribs) (Page créée avec « '''Humedad''': »)
      04:31 (cur | prev) . . (-27). . GoldofBengal (talk | contribs) (Page créée avec « Los cuatro factores ambientales principales a controlar durante la iniciación de la fruta son: '''humedad''', '''ventilación''', '''temperatura''' y '''luz'''. »)
      04:30 (cur | prev) . . (-21). . GoldofBengal (talk | contribs) (Page créée avec « Esta ''iniciación a la fructificación'' es, con mucho, el paso más delicado en el cultivo de hongos. El cultivador debe implementar una "estrategia de iniciación" con... »)
      04:28 (cur | prev) . . (-32). . GoldofBengal (talk | contribs) (Page créée avec « En el bosque, el micelio vive bajo la corteza en la semioscuridad; en otoño, cuando empieza a llover y la temperatura baja, esto provoca un estrés que le empuja a dar fr... »)
      04:28 (cur | prev) . . (-7). . GoldofBengal (talk | contribs) (Page créée avec « Fructificación y cosecha de hongos »)
      04:27 (cur | prev) . . (-24). . GoldofBengal (talk | contribs) (Page créée avec « * Deje sus botellas en la incubadora hasta que el micelio se extienda por toda la botella y se vuelva completamente blanco (3-4 semanas dependiendo de los diferentes pará... »)
      04:27 (cur | prev) . . (-25). . GoldofBengal (talk | contribs) (Page créée avec « *Utilizando pinzas previamente esterilizadas en alcohol a 70°C, coloque los extremos de las cajas de cartón cubiertas con micelio en el sustrato de sus biberones. *Cierr... »)
      04:26 (cur | prev) . . (0). . GoldofBengal (talk | contribs) (Page créée avec « *Abrir las botellas esterilizadas para inocularlas con sus cultivos madre, ricos en micelio, paso delicado porque es necesario ser lo suficientemente rápido para limitar... »)
      04:25 (cur | prev) . . (+2). . GoldofBengal (talk | contribs) (Page créée avec « Inoculación del sustrato »)
      04:25 (cur | prev) . . (-29). . GoldofBengal (talk | contribs) (Page créée avec « * Esterilizar los botellas que contienen el sustrato. Aquí los dejamos en un horno solar por un día. También es posible utilizar un microondas. Deja que se enfríen. »)
      04:24 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « '''Nota''': Para saber el contenido de humedad correcto, presione una bolita de aserrín, deben fluir unas pocas gotas y no un chorro de agua. »)
      04:23 (cur | prev) . . (-26). . GoldofBengal (talk | contribs) (Page créée avec « * Llena las botellas de plástico con tu sustrato. Debe tener un contenido de humedad de 60-65%. Perfore los tapas de las botellas y ponga un tapón de algodón en el cuel... »)
      04:22 (cur | prev) . . (-22). . GoldofBengal (talk | contribs) (Page créée avec « * Mezclar el aserrín con un 3% de [https://es.wikipedia.org/wiki/Carbonato_de_calcio Carbonato_de_calcio] (tiza o caparazón aplastado de los crustáceos) y agua. Deje l... »)
      04:17 (cur | prev) . . (-103). . GoldofBengal (talk | contribs) (Page créée avec « Los hongos que pretendemos cultivar para el consumo deben ser capaces de colonizar el sustrato antes que otros hongos y bacterias. Para ello, esterilizamos el sustrato y... »)
      04:17 (cur | prev) . . (+1). . GoldofBengal (talk | contribs) (Page créée avec « Preparación y esterilización de los botellas de sustrato »)
      04:16 (cur | prev) . . (-25). . GoldofBengal (talk | contribs) (Page créée avec « * Colocar las placas de Petri en una incubadora donde no haya luz con una temperatura entre 25-30°C. Luego debe esperar a que el micelio invada toda la caja de 5 a 10 dí... »)
      04:16 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « * Coloca los trozos de champiñones de ostras en el cartón de tus placas de Petri. Inocular por lo menos 5 placas de Petri para una mejor posibilidad de éxito. »)
      04:15 (cur | prev) . . (-51). . GoldofBengal (talk | contribs) (Page créée avec « * Lavar meticulosamente el hongo * Sumerja el bisturí/cuchillo en alcohol y luego caliéntelo en rojo con una llama (sin humo). * Deja que se enfríe durante 10 segundos... »)
      04:15 (cur | prev) . . (-47). . GoldofBengal (talk | contribs) (Page créée avec « * Esterilizar las placas de Petri (pasándolas con etanol al 70% y/o bajo UV) o los frascos de vidrio (hervirlos durante 15-20min.) * Recorte trozos de cartón de 3 cm de... »)
      04:13 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « '''Observación''': El cartón tiene la ventaja de ser un medio de cultivo "selectivo" porque es bajo en nutrientes y azúcares. La mayoría de los contaminantes necesitan... »)
      04:12 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « Esterilización y preparación de cultivos madre »)
      04:11 (cur | prev) . . (+5). . GoldofBengal (talk | contribs)
      04:11 (cur | prev) . . (+10). . GoldofBengal (talk | contribs) (Page créée avec « *Bisturí, cuchillo *Esterilización, herramientas de pasteurización * Esteriliza tus placas de Petri, cuchillo, cartón. »)
      04:11 (cur | prev) . . (-8). . GoldofBengal (talk | contribs) (Page créée avec « *Petri dish *Alcohol *Cartón *Botellas de plástico *hongos frescos* *Algodón *Sustrato (astillas de madera, posos de café, aserrín, paja,...) »)
      04:10 (cur | prev) . . (-15). . GoldofBengal (talk | contribs) (Page créée avec « *Fructificación y cosecha: Cuando el sustrato está completamente invadido, es necesario provocar un cambio en las condiciones ambientales (T°C, luz, concentración de C... »)
      04:09 (cur | prev) . . (-4). . GoldofBengal (talk | contribs) (Page créée avec « *La invasión del blanco: Con el blanco de la cultura madre podemos inocular contenedores que contienen el sustrato, el micelio invadirá todo el sustrato. Una vez que el... »)
      04:08 (cur | prev) . . (-33). . GoldofBengal (talk | contribs) (Page créée avec « *La cultura madre: El cultivo inicial (o cultivo madre) está hecho de un cuerpo frutal fresco y saludable (=hongos frescos) o puede ser comprado de un productor de "blanc... »)
      04:00 (cur | prev) . . (-3). . GoldofBengal (talk | contribs) (Page créée avec « '''Etapa de cultivo''' : »)
      03:59 (cur | prev) . . (-202). . GoldofBengal (talk | contribs) (Page créée avec « Los hongos ostra no están entre los alimentos más nutritivos, pero siguen siendo una fuente de varios elementos interesantes: vitamines [https://es.wikipedia.org/wiki/Vi... »)
      03:54 (cur | prev) . . (+1). . GoldofBengal (talk | contribs) (Page créée avec « *Nutrición : »)
      03:54 (cur | prev) . . (-216). . GoldofBengal (talk | contribs) (Page créée avec « Los hongos son uno de los pocos organismos que se alimentan de lignina y celulosa. Estos elementos están presentes en muchos residuos de la agricultura y otras actividade... »)
      03:53 (cur | prev) . . (+2). . GoldofBengal (talk | contribs) (Page créée avec « *Ecología/Economía : »)
      03:53 (cur | prev) . . (0). . GoldofBengal (talk | contribs) (Page créée avec « '''Interés de la cultura de las ostras grises''' »)
      03:52 (cur | prev) . . (-15). . GoldofBengal (talk | contribs) (Page créée avec « Este folleto trata del cultivo doméstico de hongos comestibles, en este caso hongos de ostra gris. "[https://es.wikipedia.org/wiki/Pleurotus_ostreatus]". »)
      03:51 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « Cultivo doméstico de hongos comestibles. »)
N     03:50 (cur | prev) . . (+12,978). . GoldofBengal (talk | contribs) (Page créée avec « Cultivo de hongos ostra »)
     03:20  Cuir de kombucha‎ (diff | hist) . . (+43). . GoldofBengal (talk | contribs)

23 January 2020

     21:28  (Deletion log). . [Spam Control‎ (2×)]
      21:28 . . Spam Control (talk | contribs) deleted page PHYSICIAN Doom Charges Bitcoin Substitution BitMEX Of Organized Illegality .(this page has been identified as Spam by the SpamControl)
      18:00 . . Spam Control (talk | contribs) deleted page Customer Fusses Reason Coinbase Struggles.(this page has been identified as Spam by the SpamControl)
     21:28  (Language change log). . [DarcyJunkins33‎; AKJInes836785944‎]
      21:28 . . AKJInes836785944 (talk | contribs) changed the language of PHYSICIAN Doom Charges Bitcoin Substitution BitMEX Of Organized Illegality . from French (fr) [default] to English (en) ‎(Autoset Page Language)
      18:00 . . DarcyJunkins33 (talk | contribs) changed the language of Customer Fusses Reason Coinbase Struggles. from French (fr) [default] to English (en) ‎(Autoset Page Language)
     19:40  (User creation log). . [Marine‎; LittllMind‎; AKJInes836785944‎]
      19:40 . . User account Marine (talk | contribs) was created ‎
      16:14 . . User account LittllMind (talk | contribs) was created ‎
      13:55 . . User account AKJInes836785944 (talk | contribs) was created ‎
     15:00  Cuir de kombucha‎ (diff | hist) . . (+775). . GoldofBengal (talk | contribs)