Recent changes

Track the most recent changes to the wiki on this page.

Recent changes options
Legend:
N
This edit created a new page (also see list of new pages)
m
This is a minor edit
b
This edit was performed by a bot
(±123)
The page size changed by this number of bytes
Show last 50 | 100 | 200 | 250 | 500 changes in last 1 | 3 | 7 | 14 | 30 days
Hide registered users | Hide anonymous users | Hide my edits | Show bots | Show minor edits
Show new changes starting from 09:22, 23 February 2020
   
Language:

22 February 2020

     21:48  (User creation log). . [RobynCantor‎; Jacqueline David Fayaud‎]
      21:48 . . User account Jacqueline David Fayaud (talk | contribs) was created ‎
      06:39 . . User account RobynCantor (talk | contribs) was created ‎

21 February 2020

     15:29 (Page translation log) . . 127.0.0.1 (talk) marked Lampe solaire à batteries lithium récupérées for translation ‎
     15:29  Lampe solaire à batteries lithium récupérées‎ (diff | hist) . . (0). . GoldofBengal (talk | contribs)
     14:15  Lampe solaire à batteries lithium récupérées/es‎‎ (80 changes | history) . . (-932). . [GoldofBengal‎ (80×)]
      14:15 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « *Para la impermeabilidad del puerto USB, grapar un pequeño rectángulo de cámara de aire de bicicleta, para cubrir la apertura del puerto. »)
      14:13 (cur | prev) . . (-20). . GoldofBengal (talk | contribs) (Page créée avec « *Repetir el mismo para la otra extremidad de la lámpara. Poner la pequeña tabla dentro de la carcasa de plástico y atornillar la gran tabla, todavía con las pestañas... »)
      14:10 (cur | prev) . . (-36). . GoldofBengal (talk | contribs) (Page créée avec « *Par pegar el panel, utilizar una pieza de tejido y pegar el panel abajo (con super glu por ejemplo). »)
      14:06 (cur | prev) . . (-10). . GoldofBengal (talk | contribs) (Page créée avec « *Pasar los cables del regulador de cargo en este agujero y soldarlos a las salidas correspondientes. »)
      14:06 (cur | prev) . . (-59). . GoldofBengal (talk | contribs) (Page créée avec « *Poner el panel solar sobre la gran tabla y determinar la ubicación de las salidas + y - del panel. Perforar un agujero de 5mm en este lugar en ambas tablas. Asegúrate d... »)
      13:51 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « ====<u>Fijación del panel solar :</u>==== »)
      13:51 (cur | prev) . . (+41). . GoldofBengal (talk | contribs)
      13:49 (cur | prev) . . (-70). . GoldofBengal (talk | contribs) (Page créée avec « *Posicionar la tabla con el circuito al interior de la carcasa de plástico, y atornillar una gran tabla abajo, teniando cuidado de »)
      12:36 (cur | prev) . . (-20). . GoldofBengal (talk | contribs) (Page créée avec « *Con un marcador, indicar en el plástico la ubicación del botón ON/OFF y del puerto USB. Perforar los agujeros correspondientes. »)
      12:31 (cur | prev) . . (-69). . GoldofBengal (talk | contribs) (Page créée avec « *Coger una pequeña tabla (11/13cm) y atornillar todos los componentes, con maximum simetría para asegurar un buen balance del objecto. (En la photo se puede ver un ejemp... »)
      12:27 (cur | prev) . . (+1). . GoldofBengal (talk | contribs) (Page créée avec « ====<u>Integración del circuito eléctrico :</u>==== »)
      12:27 (cur | prev) . . (-8). . GoldofBengal (talk | contribs) (Page créée avec « Cuando la carcasa de la lámpara está lista, sólo falta integrar el circuito eléctrico. »)
      12:24 (cur | prev) . . (-49). . GoldofBengal (talk | contribs) (Page créée avec « *En cada extremidad de la botella deformada, doblar a 90° hasta el interior pestañas de 1cm, biseladas en cada extremidad (photo). Las pestañas será entre las dos tabl... »)
      12:19 (cur | prev) . . (-110). . GoldofBengal (talk | contribs) (Page créée avec « *Después cortar el plástico, desatornillar los clazos para desmoldarlo. »)
      12:17 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « *Dejando la botella deformada en el molde, cortar la parte superior de la botella al nivel de la extremidad del molde. Cortar otra vez 17cm bajo la primera corte. »)
      12:14 (cur | prev) . . (+1). . GoldofBengal (talk | contribs) (Page créée avec « {{Warning|No se debe calentar demasiado cercano del plástico o por largo tiempo en el mismo lugar, para evitar que se formen burbujas.}} »)
      12:07 (cur | prev) . . (-11). . GoldofBengal (talk | contribs) (Page créée avec « *Calentar lentamente cada frente del rectangulo con un rascador térmico. El rascador debe ser a 10 de la botella minimum. Cuando la botella tiene la forma del modelo, man... »)
      11:49 (cur | prev) . . (-9). . GoldofBengal (talk | contribs)
      11:47 (cur | prev) . . (+17). . GoldofBengal (talk | contribs) (Page créée avec « *Cortar el fondo de la botella y insertar el molde de manera vertical (así, el lado de 20cm del molde será »)
      11:44 (cur | prev) . . (+2). . GoldofBengal (talk | contribs) (Page créée avec « ====<u>Termoformación de la carcasa de la lámpara :</u>==== »)
      11:43 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « *Cortar el calzo 4 partes de 20cm. Posicionarlos en las 4 esquinas de las pequeñas tablas cortadas antes (las de 11/13cm) y atornillarlas con las cabezas de tornillo sobr... »)
      11:36 (cur | prev) . . (+6). . GoldofBengal (talk | contribs) (Page créée avec « ====<u>Fabricación de los moldes</u> :==== »)
      11:36 (cur | prev) . . (-14). . GoldofBengal (talk | contribs) (Page créée avec « {{Info|Para la impermeabilidad, es mejor barnizar las tablas de antemano.}} »)
      11:34 (cur | prev) . . (-34). . GoldofBengal (talk | contribs) (Page créée avec « Cortar 2 tablas de 15/13cl y 2 tablas de 11/13cm. Posicionar cada pequeña tabla al centra de una gran tabla. Atornillaremos cada pareja después. »)
      11:30 (cur | prev) . . (-11). . GoldofBengal (talk | contribs) (Page créée avec « Las bases son las dos extremidades de la lámpara. La superior llevará el panel solar por un lado y el circuito eléctrico por el otro. La extremidad inferior servirá a... »)
      11:26 (cur | prev) . . (+2). . GoldofBengal (talk | contribs) (Page créée avec « ====<u>Fabricación de las dos bases :</u>==== »)
      11:25 (cur | prev) . . (+17). . GoldofBengal (talk | contribs) (Page créée avec « *Una botella de agua vacía de 5L *Tablas de madera contrachapada (o de madera bruto) de espesor entre 1 y 2cm *Un calzo de longitud 80cm minimum (anchura entre 3 y 5 cm) »)
      11:20 (cur | prev) . . (-22). . GoldofBengal (talk | contribs) (Page créée avec « {{Info|Este modelo permite la impermeabilización del circuito, pero necesita equipo especial :}}<br /> »)
      11:18 (cur | prev) . . (0). . GoldofBengal (talk | contribs) (Page créée avec « '''''Versíon 2 : Botella termoformada grande formato''''' »)
      11:17 (cur | prev) . . (+5). . GoldofBengal (talk | contribs) (Page créée avec « Construcción de la carcasa - Versión 2 »)
      11:16 (cur | prev) . . (-28). . GoldofBengal (talk | contribs) (Page créée avec « Este modelo es el de Open Green Energy, se puede consultar aquí [https://www.instructables.com/id/BUILD-A-NOCTURNAL-SOLAR-LIGHT-BULB/?fbclid=IwAR3FVprD6RHvUfwmKnWMdHOQwbx... »)
      11:11 (cur | prev) . . (+1). . GoldofBengal (talk | contribs) (Page créée avec « '''''Versión 1 : Tupperware''''' »)
      11:11 (cur | prev) . . (+5). . GoldofBengal (talk | contribs) (Page créée avec « Construcción de la carcasa - Versión 1 »)
      11:10 (cur | prev) . . (-13). . GoldofBengal (talk | contribs) (Page créée avec « *Cortar el cable positivo que conecta el regulador al convertidor para abrir el circuito y luego añadir en serie el interruptor que permitirá abrir y cerrar el circuito. »)
      11:09 (cur | prev) . . (-10). . GoldofBengal (talk | contribs) (Page créée avec « *Soldar el cable rojo (positivo) del módulo convertidor USB/LED en el polo OUT+ del regulador de carga, y el cable negro (negativo) en polo OUT-. "Nota:" El circuito est... »)
      11:07 (cur | prev) . . (+10). . GoldofBengal (talk | contribs) (Page créée avec « *Soldar el cable rojo del soporte de batería (positivo) en el polo B+ del regulador de carga y el cable negro (negativo) en el polo B-. »)
      11:05 (cur | prev) . . (-2). . GoldofBengal (talk | contribs)
      11:05 (cur | prev) . . (-16). . GoldofBengal (talk | contribs) (Page créée avec « *El regulador de carga tiene 2 entradas: IN+ y IN- (indicadas en el dispositivo). »)
      11:05 (cur | prev) . . (-6). . GoldofBengal (talk | contribs) (Page créée avec « *Soldar el cable rojo del panel solar (positivo) al polo IN+ del regulador de carga y el cable negro (negativo) al polo IN-. »)
      11:04 (cur | prev) . . (-18). . GoldofBengal (talk | contribs) (Page créée avec « El regulador de carga tiene 2 entradas: IN+ y IN- (indicadas en el dispositivo). »)
      11:03 (cur | prev) . . (+6). . GoldofBengal (talk | contribs) (Page créée avec « Conexión de los 3 módulos »)
      11:03 (cur | prev) . . (-14). . GoldofBengal (talk | contribs) (Page créée avec « *Soldar el cable positivo del LED a la salida OUT+ del regulador y el cable negativo a la salida OUT-. ''(imagen 7)'' »)
      11:03 (cur | prev) . . (-19). . GoldofBengal (talk | contribs) (Page créée avec « ''Atención: ''La polaridad de los cables no se indica en el LED, por lo que hará falta hacerse con un ohmímetro. Al utilizarlo, si indica un valor cero, significa que e... »)
      11:03 (cur | prev) . . (-6). . GoldofBengal (talk | contribs) (Page créée avec « El LED tiene dos cables de entrada, uno positivo y otro negativo. »)
      11:03 (cur | prev) . . (-15). . GoldofBengal (talk | contribs) (Page créée avec « *Soldar el cable rojo a la entrada VIN+ del regulador y el cable negro a la entrada VIN-. »)
      11:02 (cur | prev) . . (-6). . GoldofBengal (talk | contribs) (Page créée avec « *Coger dos cables (rojo y negro). »)
      11:02 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « Entradas : VIN + y VIN - / Salidas : OUT + y OUT - »)
      11:02 (cur | prev) . . (-9). . GoldofBengal (talk | contribs) (Page créée avec « El convertidor de tensión DC/DC tiene dos entradas y dos salidas : »)
      11:00 (cur | prev) . . (-2). . GoldofBengal (talk | contribs) (Page créée avec « '''Modulo 3 : LED''' '''/ USB convertidor''' »)
      11:00 (cur | prev) . . (+4). . GoldofBengal (talk | contribs) (Page créée avec « *Insertar la célula litio en el soporte de la batería. »)
      10:58 (cur | prev) . . (0). . GoldofBengal (talk | contribs) (Page créée avec « '''Módulo 2: Batería''' »)
      10:58 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « *Soldar el cable rojo (positivo) al polo IN+ del regulador de carga y, el cable negro (negativo) al polo IN- ''(imagen 5)'' »)
      10:58 (cur | prev) . . (-18). . GoldofBengal (talk | contribs) (Page créée avec « *El regulador de carga tiene 2 entradas: IN+ y IN- (indicadas en el dispositivo). »)
      10:58 (cur | prev) . . (-10). . GoldofBengal (talk | contribs) (Page créée avec « *Soldar el cable rojo al polo positivo del panel solar y el cable negro al polo negativo. »)
      10:58 (cur | prev) . . (-9). . GoldofBengal (talk | contribs) (Page créée avec « *Coger dos cables, uno rojo y uno negro, y pelarlos con unos alicates de corte. »)
      10:58 (cur | prev) . . (-6). . GoldofBengal (talk | contribs) (Page créée avec « '''Módulo 1 : Panel solar y regulador de carga''' »)
      10:58 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « Montaje de los 3 módulos »)
      10:57 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « '''Importante''' : Es importante producir baterías homogéneas con células que tengan aproximadamente la misma capacidad. »)
      10:57 (cur | prev) . . (+2). . GoldofBengal (talk | contribs) (Page créée avec « *Clasifique sus células: <1000 mA, entre 1000 y 1300, 1300 y 1500 y >1800 mA. »)
      10:57 (cur | prev) . . (-5). . GoldofBengal (talk | contribs) (Page créée avec « *Anotar la capacidad de la célula. Cuando más grande sea la capacidad de la célula para suministrar energía mejor. »)
      10:52 (cur | prev) . . (-10). . GoldofBengal (talk | contribs) (Page créée avec « *Descargar la célula hasta que la descarga esté completa. »)
      10:51 (cur | prev) . . (+4). . GoldofBengal (talk | contribs) (Page créée avec « *Conectar los imanes de neodimio a las pinzas de cocodrilo, y después conectarlos a las células. Los imanes sirven para pasar la corriente entre el iMAX B6 y las célula... »)
      10:51 (cur | prev) . . (-3). . GoldofBengal (talk | contribs) (Page créée avec « *el amperaje: ajustarlo a 1A para que la descarga sea suficientemente rápida y segura. En estas condiciones, espere de 1 h a 1 h 30 min para la descarga. »)
      10:49 (cur | prev) . . (-21). . GoldofBengal (talk | contribs) (Page créée avec « *el voltaje: cuando el dispositivo pida qué tipo de pilas desea cargar, elija células de litio. Automáticamente, el voltaje se ajustará a 3 V (la descarga no será inf... »)
      10:49 (cur | prev) . . (0). . GoldofBengal (talk | contribs) (Page créée avec « *Ajustar el dispositivo: »)
      10:49 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « *Conseguir un iMAX B6: un dispositivo que permite descargar las células una por una y calcular la capacidad que tienen para suministrar energía. »)
      10:49 (cur | prev) . . (-7). . GoldofBengal (talk | contribs) (Page créée avec « *Una vez que las células estén cargadas al máximo (4,2 V), hay que descargarlas. »)
      10:48 (cur | prev) . . (+9). . GoldofBengal (talk | contribs) (Page créée avec « *Cargar las células y esperar a que la carga esté completa (se encenderán todos los LED). Tiempo aproximado de espera: 24 h. ''(imagen 3)'' »)
      10:48 (cur | prev) . . (+13). . GoldofBengal (talk | contribs) (Page créée avec « *Proveerse con una batería externa: un dispositivo que permite cargar varias células al mismo tiempo a través de un puerto USB. »)
      10:48 (cur | prev) . . (-28). . GoldofBengal (talk | contribs) (Page créée avec « Para medir la capacidad de una célula, es necesario cargarla al máximo y luego descargarla. Estas células están hechas de litio, y el litio debe cargarse y descargars... »)
      10:47 (cur | prev) . . (+3). . GoldofBengal (talk | contribs) (Page créée avec « '''Medición de la capacidad :''' »)
      10:47 (cur | prev) . . (-28). . GoldofBengal (talk | contribs) (Page créée avec « ''Cuidado :'' Si algunas células tienen fugas (se puede ver al exterior de la batería), deja les, porque el litio puede ser peligroso para la salud. »)
      10:41 (cur | prev) . . (-20). . GoldofBengal (talk | contribs) (Page créée avec « *Con un voltímetro en modo corriente directa, medir la tensión de la células, y clasificar las que se puede reutilizar. »)
      10:34 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      10:34 (cur | prev) . . (-55). . GoldofBengal (talk | contribs) (Page créée avec « Empezamos con la medición del voltaje de las células, par saber si funcionan. Son recuperables si tienen una tensión superior a 3V. »)
      10:29 (cur | prev) . . (+4). . GoldofBengal (talk | contribs) (Page créée avec « '''Medición del voltaje:''' »)
      10:28 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « Para esta parte, os invitamos a consultar el tutorial [http://lowtechlab.org/wiki/R%C3%A9cup%C3%A9ration_de_batteries Reciclaje de baterías ] »)
      10:28 (cur | prev) . . (-4). . GoldofBengal (talk | contribs)
      10:26 (cur | prev) . . (-42). . GoldofBengal (talk | contribs)
      10:25 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)

20 February 2020

     16:19  (User creation log). . [Sunday‎; Dsmrs‎]
      16:19 . . User account Dsmrs (talk | contribs) was created ‎
      12:37 . . User account Sunday (talk | contribs) was created ‎

19 February 2020

     22:46  (User creation log). . [MickeyHennessy‎; LeandraTimmons1‎; JosefDominique‎]
      22:46 . . User account MickeyHennessy (talk | contribs) was created ‎
      21:56 . . User account JosefDominique (talk | contribs) was created ‎
      00:31 . . User account LeandraTimmons1 (talk | contribs) was created ‎

18 February 2020

     23:32  (User creation log). . [Kea‎; Aguscrux‎]
      23:32 . . User account Kea (talk | contribs) was created ‎
      01:05 . . User account Aguscrux (talk | contribs) was created ‎
     17:26  (Page translation log). . [127.0.0.1‎ (7×)]
      17:26 . . 127.0.0.1 (talk) marked Elevage de Mouches Soldats Noires for translation ‎
      17:18 . . 127.0.0.1 (talk) marked Chauffe eau solaire for translation ‎
      17:17 . . 127.0.0.1 (talk) marked Chauffe eau solaire for translation ‎
      17:14 . . 127.0.0.1 (talk) marked Four solaire (cuiseur type boîte) for translation ‎
      14:52 . . 127.0.0.1 (talk) marked Poelito - Poêle de masse semi-démontable for translation ‎
      10:43 . . 127.0.0.1 (talk) marked Hydroponie for translation ‎
      10:38 . . 127.0.0.1 (talk) marked Culture de la spiruline for translation ‎
     17:25  Elevage de Mouches Soldats Noires‎ (diff | hist) . . (+211). . GoldofBengal (talk | contribs)
     17:18  Chauffe eau solaire‎‎ (2 changes | history) . . (-88). . [GoldofBengal‎ (2×)]
      17:18 (cur | prev) . . (-88). . GoldofBengal (talk | contribs)
      17:17 (cur | prev) . . (-96). . GoldofBengal (talk | contribs)
     17:14  Four solaire (cuiseur type boîte)‎ (diff | hist) . . (-4). . GoldofBengal (talk | contribs)
     17:12  Lampe solaire à batteries lithium récupérées‎‎ (3 changes | history) . . (+598). . [GoldofBengal‎ (3×)]
      17:12 (cur | prev) . . (+216). . GoldofBengal (talk | contribs)
      17:10 (cur | prev) . . (+7). . GoldofBengal (talk | contribs)
      17:03 (cur | prev) . . (+375). . GoldofBengal (talk | contribs)
     14:52  Poelito - Poêle de masse semi-démontable‎ (diff | hist) . . (-73). . GoldofBengal (talk | contribs)
     10:43  Hydroponie‎ (diff | hist) . . (-4). . GoldofBengal (talk | contribs)
     10:38  Culture de la spiruline‎ (diff | hist) . . (+157). . GoldofBengal (talk | contribs)

17 February 2020

     20:35  (User creation log). . [LEVILLAIN‎; Jb.bergougnoux‎; HannahHendricks‎; DiegoDunbabin‎]
      20:35 . . User account Jb.bergougnoux (talk | contribs) was created ‎
      19:33 . . User account LEVILLAIN (talk | contribs) was created ‎
      16:00 . . User account HannahHendricks (talk | contribs) was created ‎
      14:12 . . User account DiegoDunbabin (talk | contribs) was created ‎
     18:27  Lampe solaire à batteries lithium récupérées‎‎ (6 changes | history) . . (+66). . [GoldofBengal‎ (6×)]
      18:27 (cur | prev) . . (+18). . GoldofBengal (talk | contribs)
      18:26 (cur | prev) . . (+11). . GoldofBengal (talk | contribs)
      18:23 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      15:46 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      15:45 (cur | prev) . . (+35). . GoldofBengal (talk | contribs)
      15:43 (cur | prev) . . (0). . GoldofBengal (talk | contribs)
     18:22  Cuisinière améliorée - Modèle Patsari‎ (diff | hist) . . (+61). . GoldofBengal (talk | contribs)
     17:03  Lampe solaire à batteries lithium récupérées/es‎‎ (5 changes | history) . . (+28). . [GoldofBengal‎ (5×)]
      17:03 (cur | prev) . . (-8). . GoldofBengal (talk | contribs) (Page créée avec « Para esta parte, os invitamos a consultar el tutorial [http://lowtechlab.org/wiki/R%C3%A9cup%C3%A9ration_de_batteries Récupération de batteries] »)
      17:02 (cur | prev) . . (+9). . GoldofBengal (talk | contribs) (Page créée avec « Medición de la tensión y de la capacidad de las células »)
      17:02 (cur | prev) . . (-16). . GoldofBengal (talk | contribs) (Page créée avec « * Aislar cada una de las células : despegarlas con unos alicates de corte para retirar todos los demás componentes. (imagen 2) »)
      17:02 (cur | prev) . . (-1). . GoldofBengal (talk | contribs) (Page créée avec « * Colocar la batería en un tornillo de banco para evitar que se mueva y abrirla con la ayuda de un martillo y un buril. (imagen 1) »)
      17:02 (cur | prev) . . (+44). . GoldofBengal (talk | contribs) (Page créée avec « 1) Ponerse los guantes para protegerse las manos. »)

16 February 2020

     13:09  (User creation log). . [Yann lg‎; Marion‎; LesleyMark479‎; FranchescaMorley‎; CathrynSheffield‎; Abby48V68381897‎]
      13:09 . . User account LesleyMark479 (talk | contribs) was created ‎
      10:21 . . User account Yann lg (talk | contribs) was created ‎
      08:24 . . User account FranchescaMorley (talk | contribs) was created ‎
      06:34 . . User account Abby48V68381897 (talk | contribs) was created ‎
      05:11 . . User account CathrynSheffield (talk | contribs) was created ‎
      02:22 . . User account Marion (talk | contribs) was created ‎

15 February 2020

     20:16 (User creation log) . . User account LuciaMaccallum5 (talk | contribs) was created ‎

14 February 2020

     20:15  (User creation log). . [Visant‎; YOWMarina207‎; TeriHitchcock14‎; MeganDugger6‎; Mdudu‎; JessicaTrainor6‎; Callejon‎]
      20:15 . . User account Visant (talk | contribs) was created ‎
      18:21 . . User account Mdudu (talk | contribs) was created ‎
      09:48 . . User account Callejon (talk | contribs) was created ‎
      09:27 . . User account TeriHitchcock14 (talk | contribs) was created ‎
      08:15 . . User account YOWMarina207 (talk | contribs) was created ‎
      07:10 . . User account MeganDugger6 (talk | contribs) was created ‎
      04:48 . . User account JessicaTrainor6 (talk | contribs) was created ‎
     12:13  Dokit:DocOptions‎ (diff | hist) . . (-22). . Clément (talk | contribs)
     12:09  Formulaire:Tutorial‎ (diff | hist) . . (+1,720). . Clément (talk | contribs)
     12:06  Modèle:Materials‎ (diff | hist) . . (-6,409). . Clément (talk | contribs)
     11:57  Lampe solaire à batteries lithium récupérées/en‎‎ (50 changes | history) . . (-756). . [GoldofBengal‎ (50×)]
      11:57 (cur | prev) . . (-8). . GoldofBengal (talk | contribs)
      11:57 (cur | prev) . . (-8). . GoldofBengal (talk | contribs)
      11:57 (cur | prev) . . (-8). . GoldofBengal (talk | contribs)
      11:57 (cur | prev) . . (-8). . GoldofBengal (talk | contribs)
      11:57 (cur | prev) . . (-8). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+8). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+8). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:53 (cur | prev) . . (+8). . GoldofBengal (talk | contribs)
      11:52 (cur | prev) . . (+1). . GoldofBengal (talk | contribs)
      11:52 (cur | prev) . . (+8). . GoldofBengal (talk | contribs)
      11:52 (cur | prev) . . (+8). . GoldofBengal (talk | contribs)
      11:42 (cur | prev) . . (+16). . GoldofBengal (talk | contribs) (Page créée avec « Cut out the bottom of the 5L bottle and insert inside the mold vertically (the 20cm side of the mold should be parallel to the side of the bottle). »)
      11:42 (cur | prev) . . (-18). . GoldofBengal (talk | contribs) (Page créée avec « <u>Thermoforming of the lamp envelopp</u> »)
      11:42 (cur | prev) . . (-59). . GoldofBengal (talk | contribs) (Page créée avec « In the cleat, cut out 4 portions of about 20cm. Place them in each corner of one of the already cut small boards (11/13cm) and screw each cleat portion with the board. Pl... »)
      11:42 (cur | prev) . . (-11). . GoldofBengal (talk | contribs) (Page créée avec « <u>Building the mold</u> : »)
      11:42 (cur | prev) . . (-36). . GoldofBengal (talk | contribs) (Page créée avec « These are the two ends of the lampe, the upper hosts the solar panel on one side and the electric circuit on the the other. The lower end is used to close the lamp and sea... »)
      11:42 (cur | prev) . . (-12). . GoldofBengal (talk | contribs) (Page créée avec « <u> Building the two bases :</u> »)
      11:42 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:41 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:41 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:41 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:41 (cur | prev) . . (-84). . GoldofBengal (talk | contribs) (Page créée avec « Place the panel on the bigger board, mark the position of the + and - outputs of the pannel and drill a hole of 5mm in both boards. (If any component is already in this pl... »)
      11:41 (cur | prev) . . (-11). . GoldofBengal (talk | contribs) (Page créée avec « <u> Fixing the solar panel : </u> »)
      11:41 (cur | prev) . . (-21). . GoldofBengal (talk | contribs) (Page créée avec « Place the small board with the circuit inside of the plastic envelope and screw a big board below it (15/13cm), taking tare that the plastic tabs take place between the tw... »)
      11:41 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:41 (cur | prev) . . (+70). . GoldofBengal (talk | contribs) (Page créée avec « To do that, take one of the small boards used for the mold (11/13cm) and screw all the components on it. The more symetric the layout is, the more balanced the final lamp... »)
      11:39 (cur | prev) . . (-7). . GoldofBengal (talk | contribs) (Page créée avec « <u>Integration of the electric circuit : </u> »)
      11:39 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:39 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:39 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:39 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:38 (cur | prev) . . (-39). . GoldofBengal (talk | contribs)
      11:38 (cur | prev) . . (-38). . GoldofBengal (talk | contribs)
      11:37 (cur | prev) . . (-41). . GoldofBengal (talk | contribs)
      11:37 (cur | prev) . . (-39). . GoldofBengal (talk | contribs)
      11:36 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
      11:36 (cur | prev) . . (-40). . GoldofBengal (talk | contribs)
     11:47 (Language change log) . . GoldofBengal (talk | contribs) changed the language of Porte-batterie from French (fr) [default] to French (fr) ‎(Autoset Page Language)
N    11:47  Porte-batterie‎ (diff | hist) . . (+312). . GoldofBengal (talk | contribs) (Page créée avec « {{Item |Description=<translate>Support permettant d'insérer des batteries dans un circuit électrique grâce à deux fils électriques.</translate> |Categories=Parts |Ite... »)
     11:45  Lampe solaire à batteries lithium récupérées‎ (diff | hist) . . (+111). . GoldofBengal (talk | contribs)

13 February 2020

     19:17  (User creation log). . [RuthieRodriguez‎; Raphaël‎]
      19:17 . . User account Raphaël (talk | contribs) was created ‎
      17:44 . . User account RuthieRodriguez (talk | contribs) was created ‎
     17:50  Four solaire (cuiseur type boîte)/es‎ (diff | hist) . . (-40). . GoldofBengal (talk | contribs)
     17:46  Lampe solaire à batteries lithium récupérées‎‎ (3 changes | history) . . (+234). . [GoldofBengal‎ (3×)]
      17:46 (cur | prev) . . (+218). . GoldofBengal (talk | contribs)
      17:42 (cur | prev) . . (+2). . GoldofBengal (talk | contribs)
      17:41 (cur | prev) . . (+14). . GoldofBengal (talk | contribs)