31 août 2020 à 19:54
(diff | hist) . .(-5) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Estufa Patsari Construction Manual in Spanish: http://www.stoves.bioenergylists.org/files/ManualPatsari.pdf *Helpful video tutorials for construction: https://www.youtube... »)
31 août 2020 à 19:53
(diff | hist) . .(-97) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Create a nice, smooth surface by moistening it a little and smoothing with the trowel. *Carefully remove the formwork around the cooker. *If necessary, scrape down and sm... »)
31 août 2020 à 19:52
(diff | hist) . .(-38) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Position the 3 hotplates in their locations. {{Idea|To ensure that the hotplates are placed flat and level with the edges, you can hammer a piece of wood placed flat betw... »)
31 août 2020 à 19:51
(diff | hist) . .(-41) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Use a trowel to dig a passage in the mortar for free access to the smoke venting tunnels and create a circuit between the combustion chamber and the two secondary hotplat... »)
31 août 2020 à 19:49
(diff | hist) . .(-54) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Fill the empty space with soil mortar up to the height of the oven edges. Leave empty spaces at the combustion chamber and inside the molded space for the secondary burne... »)
31 août 2020 à 19:49
(diff | hist) . .(-65) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Pour two buckets of soil mortar at the location of the secondary hotplates. *Insert the molds at the hotplate sites. You could use two plastic bowls of the same diameter... »)
31 août 2020 à 19:48
(diff | hist) . .(-63) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Position the large hotplate. Make sure it is in the center of the stove. *Position two hollow bricks, two sections of aluminum, or two tin cans (note that tin cans risk o... »)
31 août 2020 à 19:48
(diff | hist) . .(-49) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Fill the space around the combustion chamber with gravel to a level height. *At the end of the stove, position the "chacuaco" (smoke venting piece) *Cover the gravel with... »)
31 août 2020 à 19:46
(diff | hist) . .(-10) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Dip the bricks in a bucket of water and assemble them with mortar according to the plans above. The recommended thickness of mortar is usually 2cm. *Split some bricks as... »)
31 août 2020 à 19:46
(diff | hist) . .(-7) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « <br/>{{Info|If the base of the cooker is made of concrete or metal, it's advisable to place a layer of ash to insulate and prevent the base from heating up too much.}} »)
31 août 2020 à 19:45
(diff | hist) . .(-16) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « This mixture will be used for filling the interior of the cooker. {{Info|The finer the materials are sifted, the less likely the mixture will crumble and the longer the co... »)
31 août 2020 à 19:45
(diff | hist) . .(-97) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Mix 2 buckets of commercial grade sand + 1.5 buckets of soil (sifted finely) *Stir well until mixture is a uniform color. *Add 3-4 scoops of mortar. *Add 5-10 liters of w... »)
31 août 2020 à 19:44
(diff | hist) . .(-10) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *Mix 3 buckets of commercial grade sand (20L) + 1 bucket of cement (Multibat type) *Mix well with a shovel *Slowly add 5 to 10 liters of water while mixing continuously »)
31 août 2020 à 19:43
(diff | hist) . .(-12) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « {{Idea| Renting the form and molds is also optional. For example: https://trasformacionesenfierroymaquinados.es.tl/MOLDE-METALICO-DE-ESTUFA-%26%238220%3BPATSARI%26%238221%... »)
31 août 2020 à 19:43
(diff | hist) . .(-40) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *On the base, a form is made in which to pour the mixture. This mold will be made of four wooden planks (covered with form release oil) or metal sheets with four metal bar... »)
31 août 2020 à 19:42
(diff | hist) . .(-123) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « Before constructing the Patsari stove, you need a solid, stable base, not only for greater comfort for the user, but also for the sake of safety around children and pets.... »)
31 août 2020 à 19:40
(diff | hist) . .(-34) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « This stove model has been specially designed to adapt to the culinary habits of Mexico, but can be used or adapted to other contexts. This tutorial is an adaptation and tr... »)
31 août 2020 à 19:40
(diff | hist) . .(+310) . . N
Translations:Cuisinière améliorée - Modèle Patsari/7/en
(Page créée avec « This stove model has been specially designed to adapt to the culinary habits of Mexico, but can be used or adapted to other contexts. This tutorial is an adaptation and tr... »)(actuelle)
31 août 2020 à 19:40
(diff | hist) . .(+503) . . N
Translations:Cuisinière améliorée - Modèle Patsari/6/en
(Page créée avec « *'''50% reduction in fuel consumption''' compared to an open fire. *'''66% reduction in the concentration of particles and toxic gases''' (CO) in indoor air compared to an... »)(actuelle)
31 août 2020 à 19:40
(diff | hist) . .(-145) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *'''50% reduction in fuel consumption''' compared to an open fire. *'''66% reduction in the concentration of particles and toxic gases''' (CO) in indoor air compared to an... »)
31 août 2020 à 19:38
(diff | hist) . .(-56) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « In the Purhe'pecha indigenous peoples' language, Patsari means "the one who takes care of;" the stove is designed to take care of the health of the users as well as the ov... »)
31 août 2020 à 19:38
(diff | hist) . .(+229) . . N
Translations:Cuisinière améliorée - Modèle Patsari/4/en
(Page créée avec « In the Purhe'pecha indigenous peoples' language, Patsari means "the one who takes care of;" the stove is designed to take care of the health of the users as well as the ov... »)(actuelle)
31 août 2020 à 19:37
(diff | hist) . .(-113) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « *The exterior is made of brick in order to increase its lifespan *The construction process uses molds for standardization purposes, to ensure the correct dimensions of the... »)
31 août 2020 à 19:37
(diff | hist) . .(-73) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « The [http://patsari.blogspot.com/p/fotos-y-dibujos.html Patsari stove] adapted and improved upon the [https://appropedia.org/Rocket_Lorena_Stove Lorena model] which was de... »)
31 août 2020 à 19:37
(diff | hist) . .(+539) . . N
Translations:Cuisinière améliorée - Modèle Patsari/2/en
(Page créée avec « The [http://patsari.blogspot.com/p/fotos-y-dibujos.html Patsari stove] adapted and improved upon the [https://appropedia.org/Rocket_Lorena_Stove Lorena model] which was de... »)(actuelle)
31 août 2020 à 19:34
(diff | hist) . .(-22) . .Cuisinière améliorée - Modèle Patsari/en
(Page créée avec « A firewood-saving stove model developed in the 2000s in Mexico by GIRA (Interdisciplinary Group of Rural-Appropriate Technology). Simple to construct, cost-effective and h... »)
27 août 2020 à 19:44
(diff | hist) . .(-49) . .Pédalier multifonction/en
(Page créée avec « <br/>{{Idea|[CHALLENGE] The Low-Tech Lab asks you to help improve this multifunctional crankset tutorial by sharing photos of your best productions (in the comments below,... »)
27 août 2020 à 19:44
(diff | hist) . .(+336) . . N
Translations:Pédalier multifonction/22/en
(Page créée avec « <br/>{{Idea|[CHALLENGE] The Low-Tech Lab asks you to help improve this multifunctional crankset tutorial by sharing photos of your best productions (in the comments below,... »)(actuelle)
27 août 2020 à 19:43
(diff | hist) . .(+456) . . N
Translations:Pédalier multifonction/21/en
(Page créée avec « • Tutorial written by Corentin and Caroline aboard the Nomade des Mers in July 2020. • Many other examples of pedal machines: The Neglected Future of the Stationary B... »)
27 août 2020 à 19:43
(diff | hist) . .(-257) . .Pédalier multifonction/en
(Page créée avec « • Tutorial written by Corentin and Caroline aboard the Nomade des Mers in July 2020. • Many other examples of pedal machines: The Neglected Future of the Stationary B... »)
27 août 2020 à 19:43
(diff | hist) . .(+190) . . N
Translations:Pédalier multifonction/20/en
(Page créée avec « {{Note| Tool attachment: screw wedges into the table to secure each tool in the right position. Our blender door is mounted on a hinge and can be folded down to install th... »)
27 août 2020 à 19:43
(diff | hist) . .(-24) . .Pédalier multifonction/en
(Page créée avec « {{Note| Tool attachment: screw wedges into the table to secure each tool in the right position. Our blender door is mounted on a hinge and can be folded down to install th... »)
27 août 2020 à 19:42
(diff | hist) . .(-197) . .Pédalier multifonction/en
(Page créée avec « • Direct belt with gear shift (see column drill) • Belt in 8-shape, to reverse the direction of rotation (see sewing machine) • Twisted belt, to go from a horizont... »)
27 août 2020 à 19:42
(diff | hist) . .(+1 042) . . N
Translations:Pédalier multifonction/19/en
(Page créée avec « • Direct belt with gear shift (see column drill) • Belt in 8-shape, to reverse the direction of rotation (see sewing machine) • Twisted belt, to go from a horizont... »)
27 août 2020 à 19:40
(diff | hist) . .(-43) . .Pédalier multifonction/en
(Page créée avec « • Fruit juice blender • Column drill to drill and grind. It can also be used as a lathe • Sewing machine • Grain mill • Electric generator to power Peltier units... »)
27 août 2020 à 19:40
(diff | hist) . .(+193) . . N
Translations:Pédalier multifonction/17/en
(Page créée avec « • Fruit juice blender • Column drill to drill and grind. It can also be used as a lathe • Sewing machine • Grain mill • Electric generator to power Peltier units... »)
27 août 2020 à 19:39
(diff | hist) . .(+490) . . N
Translations:Pédalier multifonction/14/en
(Page créée avec « • Since it is difficult to shorten a belt, it is best to determine the height of your table based on the belt you have. In our case, the table is 1 meter above the groun... »)
27 août 2020 à 19:39
(diff | hist) . .(-88) . .Pédalier multifonction/en
(Page créée avec « • Since it is difficult to shorten a belt, it is best to determine the height of your table based on the belt you have. In our case, the table is 1 meter above the groun... »)
27 août 2020 à 19:38
(diff | hist) . .(-55) . .Pédalier multifonction/en
(Page créée avec « • Salvage the hub of the front wheel (which is not used) and remove all spokes. • Attach a pulley on either side of the hub. Transmission pulley 1 will be driven by a... »)
27 août 2020 à 19:38
(diff | hist) . .(+395) . . N
Translations:Pédalier multifonction/12/en
(Page créée avec « • Salvage the hub of the front wheel (which is not used) and remove all spokes. • Attach a pulley on either side of the hub. Transmission pulley 1 will be driven by a... »)
27 août 2020 à 19:38
(diff | hist) . .(-4) . .Pédalier multifonction/en
(Page créée avec « • Install a comfortable seat at a appropriate distance from the pedals. We opted for a seat with a backrest instead of a saddle, because the cyclist's pelvis does not ne... »)
27 août 2020 à 19:38
(diff | hist) . .(+477) . . N
Translations:Pédalier multifonction/10/en
(Page créée avec « • Install a comfortable seat at a appropriate distance from the pedals. We opted for a seat with a backrest instead of a saddle, because the cyclist's pelvis does not ne... »)
27 août 2020 à 19:37
(diff | hist) . .(+841) . . N
Translations:Pédalier multifonction/9/en
(Page créée avec « • Remove the tire from the rear wheel. • Cut off the bike frame and remove unnecessary items (see diagram). In our case it was a multi-speed bike, but to simplify we... »)
27 août 2020 à 19:37
(diff | hist) . .(-63) . .Pédalier multifonction/en
(Page créée avec « • Remove the tire from the rear wheel. • Cut off the bike frame and remove unnecessary items (see diagram). In our case it was a multi-speed bike, but to simplify we... »)
27 août 2020 à 19:35
(diff | hist) . .(-29) . .Pédalier multifonction/en
(Page créée avec « • Bike with derailleur gears • Belts of different sizes (to be measured depending on your mounting. They can be found in lawnmowers, or in garages) • Fasteners, ey... »)
27 août 2020 à 19:35
(diff | hist) . .(+318) . . N
Translations:Pédalier multifonction/6/en
(Page créée avec « • Bike with derailleur gears • Belts of different sizes (to be measured depending on your mounting. They can be found in lawnmowers, or in garages) • Fasteners, ey... »)
27 août 2020 à 19:34
(diff | hist) . .(-21) . .Pédalier multifonction/en
(Page créée avec « This tutorial describes the manufacturing of the multifunctional pedal's base, but doesn't precisely describe how to connect each tool (each is adapted according to the de... »)
27 août 2020 à 19:34
(diff | hist) . .(+207) . . N
Translations:Pédalier multifonction/5/en
(Page créée avec « This tutorial describes the manufacturing of the multifunctional pedal's base, but doesn't precisely describe how to connect each tool (each is adapted according to the de... »)
27 août 2020 à 19:34
(diff | hist) . .(-40) . .Pédalier multifonction/en
(Page créée avec « • Uses mechanical rather than electrical energy: in the boat the supply of solar panel energy is precious. We could not have all of these machines powered by on-board ba... »)
27 août 2020 à 19:34
(diff | hist) . .(+490) . . N
Translations:Pédalier multifonction/4/en
(Page créée avec « • Uses mechanical rather than electrical energy: in the boat the supply of solar panel energy is precious. We could not have all of these machines powered by on-board ba... »)
27 août 2020 à 19:33
(diff | hist) . .(+461) . . N
Translations:Pédalier multifonction/2/en
(Page créée avec « This crankset has been installed on the Nomade des Mers laboratory sailboat for 4 years. Initially designed and installed by Olivier Guy, techno professor in Normandy, it... »)
27 août 2020 à 19:33
(diff | hist) . .(-51) . .Pédalier multifonction/en
(Page créée avec « This crankset has been installed on the Nomade des Mers laboratory sailboat for 4 years. Initially designed and installed by Olivier Guy, techno professor in Normandy, it... »)
27 août 2020 à 19:32
(diff | hist) . .(-32) . .Pédalier multifonction/en
(Page créée avec « A bicycle crankset that can power multiple tools such as a blender, a drill press, a sewing machine or even an electric generator. »)
27 août 2020 à 19:32
(diff | hist) . .(+130) . . N
Translations:Pédalier multifonction/1/en
(Page créée avec « A bicycle crankset that can power multiple tools such as a blender, a drill press, a sewing machine or even an electric generator. »)(actuelle)