(Page créée avec « The trailer can now be attached to the bicycle rack. The connection system must meet the following conditions: ») |
(Mise à jour pour être en accord avec la nouvelle version de la source de la page) |
||
| (7 révisions intermédiaires par 2 utilisateurs non affichées) | |||
| Ligne 30 : | Ligne 30 : | ||
- 2 bicycle wheels | - 2 bicycle wheels | ||
| − | - wood screws | + | - wood screws |
- 4 decks | - 4 decks | ||
| Ligne 42 : | Ligne 42 : | ||
- Screwdriver | - Screwdriver | ||
| + | |Tuto_Attachments={{Tuto Attachments}} | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
| Ligne 52 : | Ligne 53 : | ||
|Step_Title=Material recovery | |Step_Title=Material recovery | ||
|Step_Content=The pallets can be collected from craftsmen or professionals. Bike wheels can be picked up from bike shops. | |Step_Content=The pallets can be collected from craftsmen or professionals. Bike wheels can be picked up from bike shops. | ||
| − | |||
The pallets can be dismantled with a crowbar and a hammer. | The pallets can be dismantled with a crowbar and a hammer. | ||
| Ligne 68 : | Ligne 68 : | ||
- The rafters 1 and 3 | - The rafters 1 and 3 | ||
| − | + | The structure must be mounted from the center | |
| − | The structure must be mounted from the center | ||
rafter 1 -> board 2 -> rafter 3 -> plates + wheels -> board 4 | rafter 1 -> board 2 -> rafter 3 -> plates + wheels -> board 4 | ||
| − | |||
Rafters 1 and 3 must be staggered. The rafters 3 must frame the bicycle wheels, so their thickness must be equal to the width of the wheels with plate. | Rafters 1 and 3 must be staggered. The rafters 3 must frame the bicycle wheels, so their thickness must be equal to the width of the wheels with plate. | ||
| Ligne 85 : | Ligne 83 : | ||
{{Tuto Step | {{Tuto Step | ||
|Step_Title=Fixing the wheels | |Step_Title=Fixing the wheels | ||
| − | |Step_Content=The wheels must be fixed before the boards 4. | + | |Step_Content=The wheels must be fixed before the boards 4. |
| − | |||
The plates can be attached to boards 2 and 4. | The plates can be attached to boards 2 and 4. | ||
| Ligne 98 : | Ligne 95 : | ||
|Step_Content=The trailer can now be attached to the bicycle rack. The connection system must meet the following conditions: | |Step_Content=The trailer can now be attached to the bicycle rack. The connection system must meet the following conditions: | ||
| − | * | + | * bear the load of the trailer |
| − | * | + | * withstand a slight tilt of the bike |
| − | * | + | * be able to be attached and detached easily |
| − | * | + | * bear braking / acceleration (bear force in all directions) |
| − | + | In our case, we chose to fix the trailer with an inner tube. | |
<br /> | <br /> | ||
Version actuelle datée du 26 août 2021 à 18:21
Dernière modification le 26/08/2021
Difficulté
Moyen
Durée
1 jour(s)
Coût
20 EUR (€)
Description
Two-wheel wooden trailer for transporting 2m50 objects.
Introduction
This bicycle trailer was produced for the opening of the Low Tech Lab Gd Paris in Boulogne-Billancourt.
It was made from herringbone pallets at Simplon Lab.
It allows you to transport objects of 2m50.Youtube
Matériaux
- 2 herringbone pallets
- 2 bicycle wheels
- wood screws
- 4 decks
- 1 air chamber
Outils
- Crowbar
- Hammer
- saw
- Screwdriver
Étape 1 - Definition of need
Before any construction project, it is important to define the need. In our case, we wanted to transport objects 2m50 long in Paris. The trailer can be used to transport other pallets, or to transport boxes, the structure is adapted accordingly.
It is also necessary to put down in writing the desired structure and to reflect in group on the feasibility of this structure. The width of a bicycle trailer cannot exceed 1m.
Étape 2 - Material recovery
The pallets can be collected from craftsmen or professionals. Bike wheels can be picked up from bike shops.
The pallets can be dismantled with a crowbar and a hammer.
Étape 3 - Construction of the wooden structure
On the wooden structure, there are 4 categories of boards:
- Plates 2 and 4
- The rafters 1 and 3
The structure must be mounted from the center
rafter 1 -> board 2 -> rafter 3 -> plates + wheels -> board 4
Rafters 1 and 3 must be staggered. The rafters 3 must frame the bicycle wheels, so their thickness must be equal to the width of the wheels with plate.
Étape 4 - Fixing the wheels
The wheels must be fixed before the boards 4.
The plates can be attached to boards 2 and 4.
Étape 5 - Link the trailer to the bike
The trailer can now be attached to the bicycle rack. The connection system must meet the following conditions:
- bear the load of the trailer
- withstand a slight tilt of the bike
- be able to be attached and detached easily
- bear braking / acceleration (bear force in all directions)
In our case, we chose to fix the trailer with an inner tube.
Published
Français
English
Deutsch
Español
Italiano
Português