Poelito - Mass stove, semi-dismountable

Tutorial de avatarLow-tech Lab | Categories : Housing, Energy

Semi-dismountable inertial mass stove. A mass stove or accumulation stove is a household heating device. Its mass, composed of heavy materials (rock, brick or concrete), stores the energy of a daily unique and intense fire (1 to 3 hours). It spreads back the heat during 24 hours, once the fire is out. Its mass confers a thermic inertia, favourable to reduce inside temperature curve of a building (that's why these stoves can be called "inertial stoves"). All the wood necessary to heat the household is burnt in one time, which induces high temperatures in the fireplace and allows a complete, low-pollutive burning. The accumulator is conceived to absorb the majority of the energy issued from the burning and smokes. So when leaving the firpace, the smokes are considerably cooled down. The heat accumulated is mainly diffused by irradiation and a littlebit by convection. Irradiation heating implies the stove to be placed in the center of the household. Most of actual mass stoves are placed in the main room, opened on the living room, dining room and kitchen. With a yeld superior to 80% for most of them, these stoves are parts of the best performers of wood heating devices. You can find here the tutorial video : [2]

License : Attribution-ShareAlike (CC BY-SA)

Video overview

Materials

Tools

Step 1 - Approvisionnement matériel



Step 2 - Constitution de l'appareil



Step 3 - Dimensionnement


Step 4 - Règles élémentaires de sécurité

Step 5 - Bétons, recette et préparation

Step 6 - Préparation du bidon

Step 7 - Réalisation des trous du cendrier et de la sortie fumées

Step 8 - Mise en place les tubes cendrier et évacuation des fumées

Step 9 - Fixation des coffrages perdus



Step 10 - Fabrication du bouchon du cendrier

Step 11 - Coulée du fond de protection

Step 12 - Réalisation des coffrages perdus

Step 13 - Positionnement des coffrages

Step 14 - Coulée de béton réfractaire



Step 15 - Retrait des coffrages perdus

Step 16 - Fabrication du conduit d’alimentation bois

Step 17 - Fabrication du bouchon d'alimentation en bois

Step 18 - Réalisation de la grille

Step 19 - fabrication de la remontée de flammes


Step 20 - Fabrication de la cloche



Step 21 - Découpe de la vitre



Step 22 - Découpe du couvercle



Step 23 - Peinture

Step 24 - Installation

Step 25 - Remplissage de sable

Step 26 - Pose de la vitre

Step 27 - Notice d'utilisation

Step 28 - Entretien

Comments

Published