Four à économie de bois/en : Différence entre versions

(Page créée avec « The heat provided by the oven can also warm up a room. Translation by Michelle Demarais »)
(update property name)
 
Ligne 1 : Ligne 1 :
{{ {{tntn|Tuto Details}}
+
{{Tuto Details
 
|Main_Picture=Four_à_économie_de_bois_9.PNG
 
|Main_Picture=Four_à_économie_de_bois_9.PNG
 
|Licences=Attribution (CC BY)
 
|Licences=Attribution (CC BY)
Ligne 15 : Ligne 15 :
 
|IsTranslation=1
 
|IsTranslation=1
 
}}
 
}}
{{ {{tntn|Introduction}}
+
{{Introduction
 
|Introduction=This oven fabrication technique was documented on during one of our trips, looking for low-techs in South America from June to September 2017 in Ecuador, Peru and Bolivia.  
 
|Introduction=This oven fabrication technique was documented on during one of our trips, looking for low-techs in South America from June to September 2017 in Ecuador, Peru and Bolivia.  
  
Ligne 22 : Ligne 22 :
 
Easy to make, some knowledge in masonry is however needed, one part is made out of bricks, displayed to form an arch. Certain metal parts need to be welded, so welding skills are also recommended.
 
Easy to make, some knowledge in masonry is however needed, one part is made out of bricks, displayed to form an arch. Certain metal parts need to be welded, so welding skills are also recommended.
 
}}
 
}}
{{ {{tntn|Materials}}
+
{{Materials
 
|Step_Picture_00=Four_à_économie_de_bois_7.PNG
 
|Step_Picture_00=Four_à_économie_de_bois_7.PNG
 
|Material=    • A metal canister of at least 30 cm in diameter
 
|Material=    • A metal canister of at least 30 cm in diameter
Ligne 39 : Ligne 39 :
 
     •  Shovel
 
     •  Shovel
 
}}
 
}}
{{ {{tntn|Separator}}}}
+
{{Separator}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Title=Making the table
 
|Step_Title=Making the table
 
|Step_Content=    • Build a solid wooden table. Shape it so the canister can be laid down on the middle of the table and so that 30 cm are left on each side of it.
 
|Step_Content=    • Build a solid wooden table. Shape it so the canister can be laid down on the middle of the table and so that 30 cm are left on each side of it.
Ligne 46 : Ligne 46 :
 
     • Cover it with an even layer of mud 4 cm thick
 
     • Cover it with an even layer of mud 4 cm thick
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Title=The brick arch
 
|Step_Title=The brick arch
 
|Step_Content=    • Lay the bricks on the surface of the table without covering the hole. The surface must be the straightest and most horizontal possible.  
 
|Step_Content=    • Lay the bricks on the surface of the table without covering the hole. The surface must be the straightest and most horizontal possible.  
Ligne 54 : Ligne 54 :
 
     • At the end of this stage, only the opening of the canister should be visible.
 
     • At the end of this stage, only the opening of the canister should be visible.
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Picture_00=Four_à_économie_de_bois_8.PNG
 
|Step_Picture_00=Four_à_économie_de_bois_8.PNG
 
|Step_Title=The fireplace
 
|Step_Title=The fireplace
Ligne 61 : Ligne 61 :
 
     • Check the sealing of the cement.
 
     • Check the sealing of the cement.
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Picture_00=Four_à_économie_de_bois_10.PNG
 
|Step_Picture_00=Four_à_économie_de_bois_10.PNG
 
|Step_Title=Insulation
 
|Step_Title=Insulation
Ligne 72 : Ligne 72 :
 
     • Leave to dry.
 
     • Leave to dry.
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Title=The evacuation of smoke
 
|Step_Title=The evacuation of smoke
 
|Step_Content=Place the 10 cm diameter pipe between the hole left in the arch and the roof, so it's tight
 
|Step_Content=Place the 10 cm diameter pipe between the hole left in the arch and the roof, so it's tight
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Picture_00=Four_à_économie_de_bois_11.PNG
 
|Step_Picture_00=Four_à_économie_de_bois_11.PNG
 
|Step_Picture_01=Four_à_économie_de_bois_12.PNG
 
|Step_Picture_01=Four_à_économie_de_bois_12.PNG
Ligne 83 : Ligne 83 :
 
     • Brackets for the grill can be welded directly inside the canister(see photo)
 
     • Brackets for the grill can be welded directly inside the canister(see photo)
 
}}
 
}}
{{ {{tntn|Tuto Step}}
+
{{Tuto Step
 
|Step_Picture_00=Four_à_économie_de_bois_13.PNG
 
|Step_Picture_00=Four_à_économie_de_bois_13.PNG
 
|Step_Title=Using the oven
 
|Step_Title=Using the oven
Ligne 95 : Ligne 95 :
 
Translation by Michelle Demarais
 
Translation by Michelle Demarais
 
}}
 
}}
{{ {{tntn|Notes}}
+
{{Notes
 
|Notes=
 
|Notes=
 
}}
 
}}
{{ {{tntn|Tuto Status}}
+
{{Tuto Status
 
|Complete=Published
 
|Complete=Published
 
}}
 
}}

Version actuelle datée du 22 octobre 2019 à 16:06

Tutorial de avatarL'Aventure des low-tech en Amérique du Sud | Catégories : Habitat, Alimentation, Énergie

An oven made with easily accessible materials to cook food and heat a room up with just a small amount of wood.

Licence : Attribution (CC BY)

Introduction

This oven fabrication technique was documented on during one of our trips, looking for low-techs in South America from June to September 2017 in Ecuador, Peru and Bolivia.  

This oven, used in the Finca Fina farm near Malacatos in Ecuador, can cook all sorts of foods with just a small amount of wood. It can store heat sufficiently and once it's hot, it can carry on cooking dishes for a considerable amount of time without being maintained. The fact that only a little fuel is used, is an advantage for regions where there isn't much wood. On a certain scale, this advantage helps reduce deforestation due to the use of wood for cooking. The low consumption of wood prevents the user from travelling as often for a supply of wood.

Easy to make, some knowledge in masonry is however needed, one part is made out of bricks, displayed to form an arch. Certain metal parts need to be welded, so welding skills are also recommended.

Matériaux

• A metal canister of at least 30 cm in diameter

   • Some bricks 4 cm thick maximum 
   • A big bucket
   • A metal pipe 10 cm in diameter (the length depends on the height of the ceiling in the house and the chimney must exceed the roof by at least 30 cm).
   • Soil (clay soil if possible)
   • Cement
   • A grill whose width is slightly smaller than that of the canister
   • Wire mesh less than 0.5 cm

Outils

• Wire cutter

   • Trowel
   • Welder (if necessary)
   • Wood saw
   •  Shovel

Étape 1 - Making the table

• Build a solid wooden table. Shape it so the canister can be laid down on the middle of the table and so that 30 cm are left on each side of it.

   • Make a square-shaped hole in the middle of the table 20 cm*20 cm
   • Cover it with an even layer of mud 4 cm thick

Étape 2 - The brick arch

• Lay the bricks on the surface of the table without covering the hole. The surface must be the straightest and most horizontal possible.

   • Lay the canister on the middle of the table, horizontally. It must be slightly raised so the air can circulate underneath.
   • Build a cement-brick arch in order to cover the canister, leaving a 10 cm space around it. Leave a 
     10 cm hole on top of the arch for the passage of the flue.
   • At the end of this stage, only the opening of the canister should be visible.

Étape 3 - The fireplace

• Under the table, build a rectangular fireplace with an opening for the fuel to be put in.

   • At the back of the fireplace, build a vertical chimney with a 20*20 dimension, going from the ground, up to the underside of the table. 
   • Check the sealing of the cement. 




Étape 4 - Insulation

• Mix the soil (clay soil if possible) with water in a big bucket.

   • Mix well.
   • Cover the arch with the fine wire mesh once the correct shape has been given. 
   • Make sure you leave the 10 cm hole in the arch free, for the flue
     ,
   • Cover the wire mesh with a 4 cm layer of mud without covering up the 10 cm hole.
   • Leave to dry. 




Étape 5 - The evacuation of smoke

Place the 10 cm diameter pipe between the hole left in the arch and the roof, so it's tight

Étape 6 - The door and the grill

• Shut the barrel so it's airtight. A hinge can be welded on the side of the opening of the barrel. (see photo)

   • Brackets for the grill can be welded directly inside the canister(see photo) 



Étape 7 - Using the oven

Once the soil is completely dry :

   • Start a fire up in the fireplace. Maintain it sufficiently. 
   • Wait until the oven is really hot, a suitable thermometer can be placed inside to check the temperature. This can take between 30 and 40 minutes.
   • Place the dish(es) in the oven and keep an eye on the baking process by quickly opening the oven door. Carry on maintaining the fire as normal. 

The heat provided by the oven can also warm up a room.

Translation by Michelle Demarais




Commentaires

Published