This tutorial gives you the process on how to make biodiesel on a medium-scale (about 50L) from used cooking oil. This tutorial was written following the Nomade des Mers crew's visit to Cambodia. The social enterprise Naga Earth collects and converts used cooking oil from the town's hotels and restaurants into biodiesel. They also make soap with glycerin that comes from this same reaction. This benefits various schools and associations who carry out hygiene programs throughout the region.
Biodiesel is an alternative fuel to petro-sourced diesel. It can be used alone in engines or blended with petro diesel with different concentration levels. This fuel is obtained from vegetable oil or animal fat that is converted by a chemical process named "transesterification". It involves making oil react with an alcohol (methanol or ethanol) and a catalyst (sodium or potassium hydroxide) in order to obtain methyl or ethyl esters (biodiesel) and a by-product called glycerin.
Biodiesel can be made in various amounts. The processes described here are suitable for occasional production and small amounts. Because the process requires practice, we recommend you start by making small amounts then gradually go towards a larger scale of production.
"Biodiesel has man benefits, making it an interesting fuel alternative:" *It is simple to make yourself. *It can be produced at a low cost* It can be used in any conventional diesel engine. It also allows for better lubrication of the engine. *It contributes to the recycling of organic waste, such as used cooking oil that is widely used in restaurants. *It is made from vegetable oil and therefore releases only a small additional amount of CO2 into the atmosphere. It also reduces the emissions of certain harmful compounds compared to petro-diesel (carbon monoxide, sulphur dioxide, etc)
- Wear safety glasses, a gown, resistant gloves and long clothes. Working with a breathing mask is also recommended.
- Methanol is the most dangerous product in the making of biodiesel. It's very flammable and the slightest spark could cause burns or an explosion. It is also toxic and can cause blindness if inhaled or ingested.
- Sodium hydroxide (soda - NaOH) and potassium hydroxide (caustic potash - KOH) are corrosive products, avoid all skin contact (if skin contact should occur, rinse with vinegar then with water).
- Work in a well-ventilated area (to reduce the risk of toxic vapours).- Work near a sink and a source of running water.
If you wish to reduce both your consumption and expenses on fossil fuel, there are several options available: *vegetable oil fuel blended with diesel *L'huile végétale carburantwith engine modification *Le Biodiesel Although this tutorial describes the third option, it's important to consider the two other options beforehandThe first step is therefore dedicated to the different considerations to be taken into account before choosing. }}
Our approach being the most ecological possible, the oil used for making biodiesel is "used cooking oil" collected from all sorts of eating establishments. In order to collect the best sort of oil, talk to the owner of the restaurant as well as the chef so you can explain the purpose of your approach. Collecting oil without permission can be qualified as an offence. Furthermore, make sure you check the quality of the oil collected. Used oil contains free fatty acids. They appear when oil is left in the open air over a certain period of time and becomes rancid or when heated in the presence of water. Frying food (that contains water) therefore causes FFAs to appear in oil. During transesterification, these FFAs react with the catalyst (strong base) and create an unwanted soap. The soap stops the products of the reaction, biodiesel and glycerol, from separating correctly, which creates an emulsion that is difficult to work with.
The more the cooking oil is used, the more the concentration in FFAs increases and becomes browner. "Therefore, try to avoid collecting old, brown oil". The better the quality of the oil is, the easier the converting process will be.
When making biodiesel, "prefer" using oil such as vegetable oil with a neutral pH or nearly neutral such as "rapeseed, corn oil or sunflower oil". These oils have a low freezing point, which means they don't solidify if temperatures drop in winter (freezing temperatures for these oils range from -10°C to -2°C for rapeseed, -15°C for sunflower).
"Avoid peanut, coconut and palm oil or animal fats" because the temperatures at which they solidify are too high (>10°C), even if biodiesel has a lower freezing point than the oil it originates from. Also ban olive oil that is too acidic, these acids could interfere during the reaction in the creating of biodiesel.
Methanol, or wood alcohol, used to be obtained by wood pyrolysis. Nowadays, it is synthesized from natural gas and is mainly used as an antifreeze for coolants, as a solvent for the synthesis of other chemicals or as fuel in the racing field (dragsters, model engines). It can be purchased through suppliers who specialize in chemicals, some DIY stores and garages.
Either sodium hydroxide (NaOH, caustic soda) or potassium hydroxide (KOH, caustic potash) can be used as a catalyst. They are both corrosive and highly basic. These chemicals are quite common and can be found in DIY stores, on line or through chemical suppliers. KOH and NaOH are both hygroscopic, which means they absorb the humidity in the atmosphere quickly. They become less efficient catalysts in the presence of water: always keep them in sealed, airtight containers.
NaOH vs KOH, different properties."
Transesterification * Used vegetable oil Modèle:For information * 250 mL of methanol/ litre of oil * If you are using new oil : 5,5g of NaOH or 7g of KOH / litre of oil. *If you are using used oil: Calculate the catalyst mass that must be added when you get to the titration stage. Modèle:For information * 1 clean, dry container with a drain tube or a tap for when you want to carry out the reaction Modèle:For information
There are at least three ways of making a diesel engine run with vegetable oil: *blending it with petro-diesel, a solvent or petrol; *using it as it is - usually called huile végétale carburant (HVC, SVO in English) or recycled vegetable oil (HVR, WVO in English); *converting it into biodiesel. The two first methods look easy, but as for many things, it isn’t that simple.
Vegetable oil is a lot more viscous (thicker) than petro-diesel or biodiesel The purpose of blending or mixing SVOs with other fuels or solvents is to reduce the viscosity to make it thinner, so it will flow easier through the fuel system to the combustion chamber. However, this is not the only problem when using SVOs. Its chemical properties and combustion characteristics are different to those of petro-diesel, for which diesel engines and their fuel systems are designed for. Diesel engines, especially the most modern ones, are high-tech machines with specific fuel needs (see la controverse TDI-SVO).
People use various blends, ranging from 10% SVO and 90% petro-diesel to 90% SVO and 10% petro-diesel. Some people use it as it is, without preheating (which makes the vegetable oil a lot more viscous). Some even use 100% SVO without preheating. They often don't realize the long term effects on the engine
You might manage it during the summer period with something like an old 5 cylinder Mercedes-Benz that's over 80 years old, that has a very resistant and tolerant engine. It won't like it but you probably won't destroy the engine. Otherwise, it probably isn't a good idea.
I can't guarantee it but using a blend containing up to 20% of good quality vegetable oil with 80% of petro-diesel is known to be quite safe for old diesels, especially in summer.
If you blend SVO with petro-diesel, you'll still be using fossil fuels - so you'll be cleaner than average, but still not enough for others. Yet, for each litre of SVO you use, you save one litre of fossil fuel and lower carbon dioxide emissions. dioxyde de carbone
However, in order to do it correctly and safely all year round, you will need a system suitable for SVO, including a preheating fuel system at the least (see below) and in that case, blending isn't needed, you can simply use 100% SVO.
Lastly, blending SVOs with other solvents like mineral turpentine (white spirit) or other "secret" ingredients such as naphthalene or xylol or with unleaded petrol are only experimental processes at this point in time and the effects of these additives on the characteristics of fuel combustion or their long term effects on the engine remain unknown. We highly recommend you don't choose this kind of solution: use such blends at your own risk.
2. Straight vegetable oil with engine modification"
Direct SVO fuel systems can be a clean, efficient and economical option.
Unlike biodiesel, you will need to modify your engine so you can use SVO. The best way to get one is to purchase a professional single-tank SVO system  with optimized injector nozzles, glow-plugs for vegetable oil as well as a fuel pre-heating system. With this système Elsbett system, you can use petro-diesel, biodiesel or SVO, with any combination you like. Start up and go, turn off and stop, just like any other car.
There are other SVO systems with two tanks that preheat the oil to make it less viscous. You must start your engine up with ordinary petro-diesel ( or biodiesel) in the tank, then switch to SVO in the other tank once the vegetable oil is hot enough (so quite liquid) then come back to petro-diesel before turning the engine off, or you'll clog the injectors.
You can find lots of information about SVO systems on here.
3 Biodiesel or SVO?"
Biodiesel has many obvious advantages over SVO: *It works in any diesel car, without any conversion or modification of the engine or fuel system - all you need to do is put it in the tank and start your car up. *It also has better properties than SVO when the weather is cold (but not as good as those of petro-diesel-see here for the use of biodiesel in winter). *Unlike SVO, many tests have been carried out on the long term in many countries, covering millions of kilometres. Biodiesel is a clean replacement fuel, safe and ready to use, whereas many SVO systems are still experimental and need to be developed
On the other hand, biodiesel can be more expensive, depending on the amount you produce, what you get from it and the comparison with oil or new petrol. And unlike SVO, it requires treatment. (The purpose of this tutorial). But the community of biodiesel producers that is continuously expanding, doesn't seem too concerned about the matter - they do their weekly or monthly produce and become familiar with the process quite quickly. Many have been doing so for many years.
Anyhow, SVO must also be treated, especially WVO that many people use with SVO systems because they are cheap and sometimes even free. When using WVO, food particles, impurities and water must be removed from it. It will also need to be deacidified. Biodiesel producers think: "If I need to do all that, I might as well make biodiesel instead". But SVO supporters will claim it requires a lot less treatment than biodiesel.
Everyone's taste is different....the decision is yours!
On the table opposite is a summary of the main differences between making biodiesel and modifying your engine to use SVO directly. SVO/WVO are the English-speaking equivalences of HVC/HVR in French.
$ Financial considerations: $
On average, a French person consumes: 1,3[€/L]*4/100[L/km]*19000[km/an] = 988 €/year, representing roughly 1000€ per year on diesel.
Biodiesel costs between 0.5€ and 1€ per litre to produce from recycled oil, representing between 380 and 760€ per year. A good treatment system, adapted to this production volume can be built for roughly 100€. The cost is therefore recovered within a few months.
A SVO system costs between 900 and 1800€. If SVO is free, the cost will therefore be recovered within 1 to 2 years.
Before it can be converted, the used oil must be filtered first in order to remove any possible food residues (fries, doughnuts...). We recommend you let the oil settle for a few days. An initial filtration must be carried out to get rid of the biggest particles (e.g.: with a double cotton sheet or a sock...). Then pour the oil into a 5µm maximum filter bag (the finer the better) above the clean canister, prepared beforehand.
- Weigh precisely 1g of catalyst and dissolve it in 1L of distilled water.
- In a glass measuring container, measure 10mL of isopropanol.
- Take 1mL of your testing oil with a graduated syringe and add it to the isopropanol.
- Add 3 drops of phenolphthalein to the blend.
- Stir the blend thoroughly, with a magnetic stirrer if possible.
- Fill the graduated cruet up with 10mL of the distilled water/catalyst blend, make sure you rinse the cruet with distilled water before using.
- Add the distilled water-catalyst to the blend, drop by drop, while stirring continuously.
- Continue to gradually add the titrant until the end point is obtained. The blend becomes a dark pink colour. The colour change should last 20 seconds.
- Take note of the exact volume of distilled water/catalyst (Vtitration) used to neutralize the acidity of the oil.
- Do a second test and calculate the average of your tests for more precision.
- Use this information to find out the amount of catalyst you need to add to the reaction following this formula: (To understand more about the formula, see ANNEX 2 of this document
"Catalyst mass required (g) = (B+ Vtitration (mL)) x Volume of oil (L)
Vtitration: volume of titrant added to neutralize the acidity of the oil (mL)
B: base quantity (catalyst) required for the reaction with unused oil.
B (KOH) = 7.0 g/L
B (NaOH) = 5.5 g/L
- Heat the oil at 60°C and maintain at this temperature.
- Pour the methanol into the glass container.
- Peser la quantité de soude définie au cours de l’étape précédente si vous utilisez de l’huile usagée et ajouter au méthanol.
- Remuer et laisser se dissoudre entièrement le catalyseur dans le méthanol. Cela prend environ 2min. Encore une fois, attention : le mélange se dégrade rapidement. Procéder à l’étape suivante dès que le mélange catalyseur/méthanol est homogène.
- Ajouter le mélange catalyseur/méthanol à l’huile chaude (60°C). Laisser les éléments se mélanger pendant plusieurs heures. Lors de la réaction, deux produis sont formés : le biodiesel et le glycérol. Le biodiesel étant moins dense, il forme la couche supérieure.
- Attendre 24 heures ou plus avant de procéder à l’étape suivante.
Drainer le glycérol par le bas de la cuve dans un nouveau contenant. Faite attention à ce qui ne reste plus de glycérine dans le biodiesel. Conserver le glycérol obtenu.
- Ajouter très lentement 20 % du volume de biodiesel en solution de lavage pour éviter la formation de savon et attendre 10 min. Drainer l’eau de lavage.
- Procéder à un second lavage. Cette fois, retourner le contenant lentement 4 à 5 fois et attendre 10 minutes. Une agitation excessive favorise la formation d’émulsion et provoquera un délai d’attente supplémentaire. Drainer l’eau de lavage.
- Procéder à un troisième lavage. Cette fois, agiter énergiquement le contenant pendant quelques minutes. Laissez reposer puis drainer l’eau de lavage.
- Transférer le biodiesel vierge et lavé dans un nouveau contenant.
- Chauffer à 50 °C pendant quelques heures jusqu’à ce que le biodiesel devienne clair.
Tuto vidéo de construction d'un alambic maison: https://www.youtube.com/watch?v=5H1UVv8FaO8